稀土与含硫有机配体配合物的研究: I. 二乙氨基荒酸稀土配合 物Et~2NH~2 [RE9S~2CNEt~2)~4]的合成、表征与结构

在干燥氮气氛中,以乙醇为溶剂制备出稀土与二乙氨基荒酸二乙铵形成的十五个配合物,测定了它们的红外及紫外光谱、热谱和电导,确定该类配合物组成为Et~2NH~2[RE9S~2CNEt~2)~4](RE=La-Lu,Y;Pm除外)。镧配合物的X射线结构分析表明,在该配合物中四个二乙氨基荒酸根各通过两个硫原子与镧离子成键,从而形成八配位的十二面体阴离子,并与二乙铵阳离子形成离子缔合型的配合物分子。     

聚合物载体-稀土金属配合物的研究IV.含亚硫酰基聚合物载体-稀土金属配合物的合成,表征及其催化活性

Styrene-2-(methylsulfinyl)ethyl methacrylate copolymer-supported MCl3 complexes, where M = La, Pr, Nd, Eu, Ho, Er, Tm, and Yb, were prepared and characterized by IR spectroscopy. The catalytic activity of the polymer-supported NdCl3-(iso-Bu)3Al system towards stereospecific polymerisation of butadiene was 2-3 times higher than that of NdCl3-(iso-Bu)3Al-DMSO system. The cis-1,4 content of polybutadiene formed was >98%.     

SYNTHESIS, CHARACTERIZATION, METAL-UPTAKE BEHAVIOR OF BIS（BENZIMIDAZOLE） RESIN SUPPORTED ON EPOXIDE POLYMER

The new chelate resins, abbreviated as PNBMZs and PBBMZs based on epoxide polymer, were synthesized by polycondensation of N,N-diglycidyl-4-glycidyloxyaniline or 1,4-bis（2,3-epoxypropyl）benzene with the primary amine group of 1,3-bis（benzimidazol-2yl）propylamine （BBPAH）. The ion exchangers contain 2.71-3.23 mmol of the ligand contents per gram of the resin. Batch extraction capacities were determined for the metal chloride salts in buffer solutions in the pH range from -1 to 6.0. The chelate resins were very selective for Cu^2＋, Zn^2＋, Cd^2＋ in the presence of other divalent transition metal ions. The maximum uptake capacities of PNBMZ （synthetic molar ratio = 1：1.5） under non-competitive condition were found to be 0.94 mmol/g for Cu^2＋ at pH = 2, 1.3 mmol/g for Cd^2＋ at pH = 1 and 1.75 mmol/g for Zn^2＋ at pH = -1 respectively. While in the case of PBBMZ, it was 1.39 mmol/g for Cd〉 at pH = 1. The metal-uptake behaviors for both of them showed strong pH dependence, and their extraction capacities increase with decreasing pH. The uptake of Cu^2＋ by the resin PNBMZs at pH = 1 was found to be rather fast with t1/2 = 18 min. Metal-uptake experiments under competitive conditions also confirm that the chelate resins have a high selectivity for Cu^2＋, Zn^2＋, Cd^2＋ and the contrary pH dependence.     

[Co(C~5H~5)~2]~n.[M(dmit)~2](M=Ni,Pd;n=0,1,2)型配合物的合成及表征

二茂金属[M'(C~5H~5)~2]^1^+的盐与(NBu~4)~n[M(dmit)~2](M=Ni, Pd; N=1,2)反应, 当M'=Fe, Ni; n=1时, 分别得到了导电配合物[Ni(dmit)~2]和[Pd(dmit)~2]; 当M'=Co, n=1,2时, 分别得到的是电荷几乎不转移的4个盐[Co(C~5H~5)~2]~n[Ni(dmit)~2]和[Co(C~5H~5)~2]~n[Pd(dmit)~2]。用ESCA、Raman谱及循环伏安图讨论了上述化合物形成时的电荷转移量。尽管[M(dmit)~2]的室温电导率相当大, 但其电导率随温度的变化曲线表明它们属于半导体。EHCO能带计算给出[Ni(dmit)~2]的能隙0.112eV, 与实测的电导活化能相当接近。     

用衰减全反射红外二向色性表征聚环氧乙烷薄膜的表面取向

应用衰减全反射二向色性表征聚合物的表面取向,可不必测定样品的折光率使大多数实验简化.以聚环氧乙烷为例.用衰减全反射偏振红外光谱测定了它的表面二向色性比和计算了相应的取向函数.     

2,5-噻吩齐聚物链结构的表征

本文合成、分离和纯化了一系列2,5-噻吩齐聚物(n=2-5),作为聚噻吩的模型化合物.首次系统报道了这类化合物的质谱、^1H、^1^3C核磁共振谱和红外光谱,以对其结构进行表征,所得结果与用电化学方法制备的中性聚噻吩的相应结果进行比较,表面聚噻也具有α-α'连结的结构.     

杂原子Ti-ZSM-12分子筛的合成与结构表征

以甲基三乙基溴化铵为模板剂,水热晶化法合成出杂原子Ti-ZSM-12型分子筛.X射线衍射,扫描电镜,IR及XPS等现代技术手段研究表明杂原子Ti取代骨架Si原子而存在于ZSM-12分子筛骨架上.     

聚合物链构象的研究 II: 1,2-聚丁二烯的构象特征和链分子的特征比

基于Flory的链分子统计理论, 用MM2分子力学程序改进了1,2-聚丁二烯构象分析,同时讨论了温度的影响. 着重考查了全同1,2-聚丁二烯特征比随能量的变化规律, 并且注意到聚苯乙烯, 聚丙烯酸甲酯等全同链的特征比按相似规律变化, 从而表现了聚烯烃全同链的共同特征.     

SYNTHESIS AND CHARACTERIZATION OF ORGANO-SOLUBLE FLUORINATED POLYIMIDES FROM 4,4''''-BIS(3-AMINO-5-TRIFLUOROMETHYLPHENOXY)-BIPHENYL AND VARIOUS AROMATIC DIANHYDRIDES

An aromatic diamine monomer,4,4'-bis(3-amino-5-trifluoromethyl phenoxy)-biphenyl (TFBPDA),wassynthesized via the nucleophilic displacement reaction of 3,5-dinitrobenzotrifluoride and 4,4'-biphenol.The monomer wasreacted with various aromatic dianhydrides via the high temperature polycondensation procedure to provide a series ofpolyimides.The polyimides,PI-1 to PI-4,show good solubility not only in aprotic solvents,such as N-methyl-2-pyrrolidinone and N,N-dimethylacetamide,but also in many common solvents,such as m-cresol,chloroform andcyclopentanone.PI-4,derived from 4,4'-(hexafluoroisopropylidene)diphthalic anhydride and TFBPDA,was even soluble intoluene.Moreover,PI films exhibit good thermal stability,outstanding transparency in the visible light region and acceptablemechanical and electrical properties.The excellent combined properties of the polyimides make them as a good candidate forfabricating microelectronics.     

La0.8Sr0.2Ni0.4Fe0.6O3–Ce0.8Gd0.2O2–δ Nanocomposite as Mixed Ionic–Electronic Conducting Material for SOFC Cathode and Oxygen Permeable Membranes: Synthesis and Properties

Mixed ionic–electronic conducting nanocomposite La_0.8Sr_0.2Ni_0.4Fe_0.6O₃ (LSNF)–Ce_0.8Gd_0.2O_{2– δ} (GDC) was prepared via ultrasonic dispersion of nanocrystalline powders of perovskite and fluorite oxides in water with addition of surfactant, followed by drying and sintering up to 1300°C. Analysis of the real structure of nanocomposite (studied by XRD and TEM with EDX) and its surface composition (studied by XPS) revealed moderate redistribution of elements between phases favoring their epitaxy. Results of impedance spectroscopy, oxygen isotope exchange, O₂ TPD and H₂ TPR experiments revealed a positive effect of composite interfaces on the oxygen mobility and reactivity agreeing with the ambipolar transport behavior of MIEC composite. Preliminary testing of button-size cell with functionally graded LSNF–GDC cathode layer supported on thin YSZ layer covering Ni/YSZ cermet demonstrated high and stable performance, which is promising for its practical application.