Basic study of the gelation of dimethacrylate‐type crosslinking agents

An investigation was made of the gelation of dimethacrylate‐type crosslinking agents in view of an application for separation media. The study mainly centered on a crosslinking agent, glycerol dimethacrylate (GDMA), which is relatively hydrophilic because of a hydroxyl group in the middle of its structure. The gelation of GDMA was compared with that of other hydrophobic crosslinking agents such as ethylene glycol dimethacrylate and 1,6‐hexanediol dimethacrylate. The diluents used in the study were toluene, toluene with methanol, and cyclohexanol. The gelation was observed in real time with a charge coupled device camera and dynamic light scattering (DLS). Also, the separated dry gels were extensively characterized with scanning electron microscopy, BET (N₂ absorption and desorption isotherm), and Fourier transform infrared. DLS analysis showed a stronger molecular interaction of GDMA gelation in toluene, whereas this interaction was much weaker in an alcoholic solvent such as toluene with methanol or cyclohexanol. This indicated that GDMA gelation might proceed through hydrogen bonding as well as a crosslinking reaction of vinyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 949–958, 2006     

Development and evaluation of microfluidic device for the determination of organophosphorus pesticide incorporating monolith based immobilized AChE with spectrophotometric detection

A spectrophotometric microfluidic bioreactor system is described for the determination of organophosphorus pesticides. The glass chip was designed and fabricated for in situ monolithic preparation and subsequently acetlycholineserase (AChE) immobilization via a covalent bonding method. The porous polymer monolith was prepared using glycidyl methacrylate, ethylenedimethacrylate and 2,2-dimethoxy-1,2-diphenylethan-1-one in binary porogenic solvents of cyclohexanol and dodecanol. The epoxide groups of monolith were reacted with ethylenediamine and gluteraldehyde to allow immobilization of the enzyme using their amine groups. Organophosphorus pesticides can be determined by measuring their inhibition effect on the enzyme AChE using Ellman's reaction. A linear relationship between the absorbance and percentage inhibitions was obtained over the concentration range of 0.25 to 2.50?mg?L^?1 paraoxon with a correlation coefficient (r ²) of 0.9974. The limit of detection (LOD) defined as 10% inhibition (I ₁₀) was 0.17?mg?L^?1 for paraoxon. The relative standard deviations (RSD) of 1.0?mg?L^?1 paraoxon was 3.73% (n?=?5). The proposed µFI system incorporates efficient enzyme immobilization and reduces reagent consumption and waste production and could thus be considered to be more environmentally friendly.     

Comparison of various silica‐based monoliths for the analysis of large biomolecules†

In the present study, three types of silica‐based monoliths, i.e. the first and second generations of commercial silica monolithic columns and a wide‐pore prototype monolith were compared for the analysis of large biomolecules. These molecules possess molecular weights between 1 and 66 kDa. The gradient kinetic performance of the first‐generation monolith was lower than that of the second generation, for large biomolecules (>14 kDa) but very close with smaller ones (1.3–5.8 kDa). In contrast, the wide‐pore prototype column was particularly attractive with proteins larger than 19 kDa (higher peak capacity). Among these three columns, the selectivity and retention remained quite similar but a possible larger number of accessible and charged residual silanols was noticed on the wide‐pore prototype material, which led to unpredicted small changes in selectivity and slightly broader peaks than expected. The peak shapes attained with the addition of 0.1% formic acid in the mobile phase remained acceptable for MS coupling, particularly for biomolecules of less than 6 kDa. It was found that one of the major issues with all of these silica‐based monoliths is the possible poor recovery of large biomolecules (principally with monoclonal antibody fragments of more than 25 kDa).     

Poly(carboxyethyl acrylate-co-ethylene glycol dimethacrylate) precursor monolith with bonded octadecyl ligands for use in reversed-phase capillary electrochromatography

A carboxy precursor monolithic column, namely poly(carboxy ethyl acrylate-co-ethylene glycol dimethacrylate) was first produced in a 100 μm i.d. fused-silica capillary and subsequently surface bonded with n-octadecyl (C₁₈) ligands by a post-polymerization functionalization process with octadecylamine in the presence of N,N´-dicyclohexylcarbodiimide. The bonding of octadecyl ligands was achieved via an amide linkage between the carboxy functions of the precursor monolith and the amino group of the octadecylamine compound. The resulting C₁₈ monolith exhibited a very low electroosmotic flow (EOF), a fact that required the incorporation of small amounts of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) in the polymerization solution to produce a precursor monolith with fixed negative charges of sulfonate groups. This may indicate that the conjugation of the carboxy functions with octadecylamine occurred to a large extent so that the amount of residual carboxy functions was sparsely dispersed and not enough to produce a desirable EOF. The EOF velocity of the C₁₈ column having fixed negative charges provided by the incorporated AMPS increased with increasing ACN content of the mobile phase signaling an increased binding of mobile phase ions to the polar amide linkages near the monolithic surface, and a decreased viscosity of the mobile phase, both of which would result in increased EOF velocity. The C₁₈ monolithic column constituted a novel nonpolar sorbent for reversed-phase capillary electrochromatography for nonpolar solutes, e.g., alkylbenzenes, alkylphenyl ketones, and polyaromatic hydrocarbons, and slightly polar compounds including phenol and chlorophenols. The C₁₈ monolithic column exhibited relatively high selectivity toward chlorophenols differing by one chloro substituent.     

Determination of low-aliphatic aldehyde derivatizatives in human saliva using polymer monolith microextraction coupled to high-performance liquid chromatography

In this study, a polymer monolith microextraction (PMME) using a poly (methacrylic acid-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith in conjunction with high-performance liquid chromatography (HPLC) was developed for the determination of 2,4-dinitrophenylhydrazine (DNPH) derivatives of several aldehydes in human saliva. The conditions for the labeling reactions of aldehydes with DNPH and followed extraction of the derivatives were optimized. The precision, recovery and detection limits were evaluated with spiked saliva. The limits of detection ranged from 0.43 to 1.40 μg/L. The inter-and intra-day relative standard deviations were less than 10%. The proposed method was successfully applied to the determination of aldehydes in saliva samples from a non-smoker, a passive smoker and a heavy smoker.     

One-pot synthesis of N-methylimidazolium-based porous polymer monolith for capillary electrochromatography via free radical copolymerization and quaterisation

One-pot synthesis of porous polymer monolith decorated with N-methylimidazolium in a capillary was described. The polymer matrix was synthesized by in situ copolymerization and quaterization of 3-chloro-2-hydroxylpropyl methacrylate (CHPMA), ethylene dimethacrylate (EDMA), and N-methylimidazole (N-MIz). The influencing factors including amount of cross-linkers, composition of porogenic solvents, and polymerization temperature on the formation of the monolithic column were investigated. The monolithic column exhibited high column efficiency for thiourea, up to 135 000 plates per meter, and phenylmethanol, up to 102 000 plates per meter. Different types of compounds including alkylbenzenes, phenols, and inorganic anions were successfully baseline separated by capillary electrochromatography (CEC). The separation of theses analytes on the column indicated typical reversed-phase and anion-exchange chromatographic retention mechanism.     

智能型色谱整体固定相的研究进展

整体柱作为新一代色谱固定相,具有原位制备、快速传质和高通透性的特点,近年来引起人们的极大关注。智能型聚合物作为一类功能性材料,能在温度、pH和盐等环境因素的刺激下产生特异性响应变化,通常被修饰到固相载体表面用来构造环境敏感性材料,使得该智能材料在药物控释、化学传感和细胞生长等领域有着广泛的应用。因此,在整体柱上构造智能型表面更为其在色谱领域的发展提供了新的契机。本文主要综述了近年来智能型整体柱在色谱领域的研究进展。     

空心微球结构Au/Ag合金泡沫块体的制备

将平均晶粒尺寸为4.6 nm的金粒子通过静电作用粘附于聚苯乙烯（PS）微球表面用于化学镀,化学镀金后PS表面的金沉积层几乎达到完全包覆,厚度70~90 nm;在Au/PS表面进行化学镀银,沉积的银颗粒堆积紧密,颗粒大小较先前沉积的金颗粒大,镀覆层厚度增厚至200~400 nm;模板去除后,获得了完全自支撑的Au40Ag60空心微球结构的圆柱状泡沫材料。制备的金银合金泡沫由直径约10 m的空心球壳组成,圆柱体直径约5 mm,密度约1.2 g/cm3。     

Application of poly(methacrylic acid-ethylene glycol dimethacrylate) monolith microextraction coupled with capillary zone electrophoresis to the determination of opiates in human urine

A novel poly(methacrylic acid-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith microextraction method coupled with CZE was proposed for rapidly determining a mixture of opiates comprising heroin, 6-monoacetylmorphine, morphine, codeine, papaverine, and narcotine in human urine. The extraction device contained a regular plastic syringe, the poly(MAA-EGDMA) monolithic capillary tube (530 microm id x 3 cm) and a plastic pinhead, which connected the monolithic capillary tube and the syringe without leakage. In the polymer monolith microextraction, the sample solution was ejected via the monolithic capillary tube by a programmable syringe pump, followed by desorption with an aliquot of appropriate solution, which was collected into a vial for the subsequent analysis by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v with temperature and voltage of 25 degrees C and 25 kV, respectively. By applying electrokinetic injection with field-enhanced sample stacking, detection limits of 6.6-19.5 ng/mL were achieved. Excellent method of reproducibility was found over a linear range of 80-2000 ng/mL.     

Micro-bore titanium housed polymer monoliths for reversed-phase liquid chromatography of small molecules

A new method for the fixation of polymethacrylate monoliths within titanium tubing of up to 0.8 mm I.D. for use as a chromatographic column under elevated temperatures and pressures is described. The preparation of butyl methacrylate–ethylene dimethacrylate-based monolithic stationary phases with desired porous structures was achieved within titanium tubing with pre-oxidised internal walls. The oxidised titanium surface was subsequently silanised with 3-trimethoxysilylpropyl methacrylate resulting in tight bonding of butyl methacrylate porous monolith to the internal walls, providing stationary phase stability at column temperatures up to 110 °C and at operating column pressure drops of >28 MPa. The titanium housed monoliths exhibited a uniform and dense porous structure, which provided peak efficiencies of up to 59,000 theoretical plates per meter when evaluated for the separation of small molecules in reversed-phase mode, under optimal conditions (achieved at 15 μL/min and temperature of 110 °C for naphthalene with a retention factor, k = 0.58). The developed column was applied to the reversed-phase isocratic separation of a text mixture of pesticides.