排序方式: 共有140条查询结果,搜索用时 15 毫秒
1.
2.
本文以烯烃、芳烃、多核芳烃、烯烃-烷烃混合物、烯烃-多核芳烃混合物、氯代烃和溴代烃等类型的化合物为代表, 考察了化合物结构对气相色谱-微波等离子体发射光谱联用测定化合物经验式结果的影响。对属于同系物的烃类选其中任一种为参比物, 测定准确度不受化合物结构的影响; 对含有非同系物的混合物, 如烯烃-多核芳烃, 参比物和被测物的结构对测定结果准确度有一定的影响, 选择其中的非同系物作参比物时, 所测得的经验式准确度相对较差; 含卤素原子的化合物结构对经验式测定影响较大, 必须选择结构相近(碳架结构和卤素原子数相近)的化合物作为经验式测定的参比物。 相似文献
3.
Hongmin Liu Xiaojiang Ye Zhiwei Lian Yuangao Wen Wenfeng Shangguan 《Research on Chemical Intermediates》2006,32(1):9-16
Formaldehyde is one of the most harmful pollutants that endanger occupants' health and the way of its effective removal has
become a focus in the field of air quality. This paper studies the static photocatalytic removal of formaldehyde experimentally
and finds out that carbon monoxide, which is more harmful to occupants' health than the formaldehyde itself, is one of the
by-products in the process of photocatalytic oxidation of formaldehyde. The increase of carbon monoxide concentration should
be taken into consideration in the photocatalytic application. The photocatalyst surface at room temperature can weakly adsorb
CO and CO2, which can deactivate the photocatalysts. 相似文献
4.
在p-硝基氯苯(1)与α-氰基乙酰乙酯-α-碳负离子(2)的反应过程中, 测得了反应中间体p-硝基氯苯负离子自由基(3)的ESR谱。用ESR场/频联锁技术测定了(3)的ESR吸收强度-时间曲线, 当[1]《[2]时, 其结果与连续一级反应动力学相吻合。测得了从2向1的电子转移和3的分解反应速率常数和活化参数, 反应产物为α-氰基-α-(p-硝基苯基)乙酸乙酯和微量的硝基苯。为该反应提出了非链式的电子转移-负离子自由基分解-自由基偶合机理。 相似文献
5.
6.
7.
本文研究四苯基钴卟啉化学修饰玻碳电极的热处理,经热处理的这种电极[(PCo/GC)h]具有对氧催化还原的异常高的稳定性和活性.在纯O2饱和的0.05mol.L^-^1H2SO4溶液中经循环伏安(CV)扫描3000次(100mV/s),其催化活性未见明显降低.研究了热处理温度(500-1000℃)对(PCo/GC)h电极电催化性能的影响.用紫外可见光谱对热处理产物的结构进行了分析.用CV法及旋转圆盘电极研究了O2在(PCo/GC)h电极上电催化反应动力学,测定了速率常数.在该电极上O2的还原反应为二电子还原成H2O2的不可逆过程. 相似文献
8.
磁铅石型复合氧化物LaNi_xCo_(1-x)Al_(11)O_(19+δ)催化剂上CH_4和CO_2重整反应的研究 总被引:3,自引:0,他引:3
考察了磁铅石型复合氧化物LaNi_(0.5)M_(0.5)Al_(11)O_(19 + δ) (M = Co, Fe, Mn, Cu)和LaNi_xCo_(1-x)Al_(11)O_(19+δ)催化剂在CH_4与CO_2重整制合成 气反应中的催化活性,并应用XRD,TPR,UV-DRS技术着重表征LaNi_xCo_(1-x)Al_ (11)O_(19+δ)催化剂的结构和性能。研究结果表明该系列催化剂具有相同的晶体 结构和相似的还原稳定性。对不同过渡金属取代的催化剂来说,以LaNi_(0.5)Co_ (0.5)Al_(11)O_(19+δ)催化剂具有最好的反应活性。而对于LaNi_xCo_(1-x)Al_ (11)O_(19+δ)系列催化剂,当x ≤ 0.375时,随x值的增大,催化活性明显提高, 但在0.375 ≤ x ≤ 1.0范围内,催化活性几乎保持不变。由此得到结论,对于此 反应来说,控制Ni量在0.375 ≤ x ≤ 0.50范围内比较合适。 相似文献
9.
《Composite Interfaces》2013,20(4):441-451
The influence of interfacial reaction on interfacial performance of carbon fiber/polyarylacetylene resin composites was studied. For this purpose, vinyltrimethoxysilane containing a double bond was grafted onto the carbon fiber surface to react with the triple bond of polyarylacetylene resin. The reaction between polyarylacetylene resin and vinyltrimethoxysilane was proved by reference to the model reaction between phenylacetylene and vinyltrimethoxysilane. Surface chemical analysis by XPS, surface energy determination from the dynamic contact angle, and the interfacial adhesion in composites was evaluated by interfacial shear strength test as well. It was found that vinyltrimethoxysilane, which can react with polyarylacetylene resin, had been grafted onto the carbon fiber surface. Furthermore, because the reaction between polyarylacetylene resin and vinyltrimethoxysilane took place at the interface, the interfacial adhesion in composites was significantly increased, and the improvement of interfacial adhesion was all attributed to the interfacial reaction. 相似文献
10.
《Composite Interfaces》2013,20(1):47-66
This study investigated the effectiveness of external strengthening technique. The experimental variables were the strengthening material and overlay materials using polymer mixtures. Beams considered in this study are the ones strengthened either with external steel plate or carbon fiber sheet (CFS) bonded to the overlay soffit or with reinforcing rebars in the overlay. An analytical method based on the nonlinear layered finite element method is used to simulate the load–deflection behavior of strengthened beam. The theoretically obtained load–deflection relationships and strains of the strengthened beams are compared to the corresponding experimental values. Efficiencies of the repairing techniques are evaluated by comparing the approximate measures on the cumulative slips. Parametric studies are then obtained using the developed model to investigate the effects of design variables on the overall flexural behavior of the strengthened beam. Simply supported beams under monotonically increasing symmetrical loads are considered exclusively. 相似文献