Constructing the CF3 group; unique trifluorodecarboxylation induced by BrF3

A variety of 2-alkyl-1,3-dithiane-2-carboxylic acids was prepared from the appropriate alkyl halides, 1,3-dithiane and CO₂. These acids were reacted with BrF₃ to form the trifluoromethylalkyl derivatives via a combination of ionic and radical trifluorodecarboxylation in about 50-60% yield.     

纤维素基磁性聚偕胺肟树脂的研究——循环吸溴中吸附与还原能力的变化

研究了酸式纤维素基磁性聚偕胺肟树脂（ＡＭＡＯ）在循环吸溴过程中吸附容量和还原能力的变化，发现原树脂的吸溴初速和溴的还原率比再生树脂高一倍以上，但第一次和第二次再生树脂的吸附速度和还原效率几乎相同，暗示着树脂吸溴后基本结构已发生了彻底的变化．树脂在循环使用时吸溴容量变化不大而溴的还原量却显著降低，表明ＡＭＡＯ作为吸溴剂有较高的实用价值．     

离子缔合富集明极溶出伏安法测定痕量碘——Ⅰ.以丁基罗丹明B为离子缔合剂

本文提出在0.1mol/LH_2SO_4,7.5×10~(-4)mol/LBr~-和6×10~(-5)mol/L丁基罗丹明B(R~+)的底液中,在+1.0V下,I~-离子于玻璃电极上被氧化生成I_2BrR离子缔合物,藉以阴极溶出伏安法测定碘、I~-离子浓度在1～50ppb范围内与峰电流呈线性关系。用于食盐中痕碘的测定。     

平台蒸发溴化铟分子吸收光谱法测定痕量溴的研究

本文对 InBr 分子吸收光谱法测定溴进行了研究。使用平台大大降低了 InO 背景吸收,使信-背比增大十倍。铟先于溴进样可提高 InBr 吸收信号。铬空心阴极灯可代替氘灯作为测定光源。方法灵敏度为8.5ng/0.0044吸收。     

Comparison of the electrophilic and free-radical addition of halogens with hexafluoro-1,3-butadiene and 1,3-butadiene

Ionic and photochemical reaction of chlorine (Cl₂), bromine (Br₂) and iodine monochloride (ICl) to hexafluoro-1,3-butadiene (1) and 1,3-butadiene (2) were carried out under conditions that would provide product distributions under controlled ionic or free-radical conditions. Product distributions for ionic reaction of Cl₂ and Br₂ with 1 are similar and suggest a weakly-bridged halonium ion species. Theoretical calculations support weakly-bridged chloronium and bromonium ions for both dienes 1 and 2. There are more of the 1,4-dihalo-2-butene products from ionic halogenation of 1 than 2 which correlates with the greater charge density on carbon-4 of halonium ions from 1. Ionic and free-radical reactions of ICl with 1 give 8 and 2% of 3-chloro-4-iodohexafluoro-1-butene and 4-chloro-3-iodohexafluoro-1-butene, respectively. The minor cis-1,4-dihalo-2-butene products from 1 and 2 are reported when formed.     

On the 6-exo-trig ring closure of substituted 5-hexen-1-oxyl radicals

Substituted 5-hexen-1-oxyl radicals have been generated from N-(5-hexen-1-oxy)-5-(p-methoxyphenyl)-4-methylthiazole-2(3H)-thiones under tin-free conditions and have been successfully applied as reactive intermediates in a mechanistic study on the formation of bromomethyl-substituted tetrahydropyrans via 6-exo-trig selective cyclizations.     

Exploratory study of the reaction of bis(2-methoxyethyl)aminosulfur trifluoride (Deoxofluor™ reagent) with diaryl sulfoxides: novel routes to Ar2SF2 and Ar2SF(OTf) via sulfoxide activation

Neither bis(2-methoxyethyl)aminosulfur trifluoride (Deoxofluor™ reagent) nor HF/pyridine alone can fluorinate diaryl sulfoxides. S-fluorination can be effected by activating the sulfoxide via protonation with HF/pyridine (70:30) to form sulfoxonium ions in equilibrium which are then S-fluorinated in situ with Deoxofluor™ to give Ar₂SF₂ compounds. Conversions depend strongly on steric factors and the reactions require the use of excess Deoxofluor™ and HF/pyridine. NMR data for the resulting diarylsulfur difluorides are gathered and discussed. Sulfoxide activation via diaryl (trifloxy) sulfonium triflate generated in situ from Ar₂SO with triflic anhydride at low temperature represents another strategy for S-fluorination with Deoxofluor™ to generate Ar₂S(OTf)F.     

Anodic behavior of nickel-based alloys in the electrolytic production of NF3

The Ni-based alloys, such as Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si, prepared by hot isostatic pressing (HIP) at 1000 °C under 2 × 10⁸ Pa for 2 h were employed as the anodes for electrolytic production of NF₃. The current efficiencies for NF₃ formation were 42-38, 52-40, 52-47, 63-62, 50 and 41% for Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloys, respectively. The current efficiencies only on Ni-Cu alloys with Cu concentrations lower than 10 mol% were almost the same as those on Ni sheet and HIPed Ni anodes, whereas those on the other alloys used in this study were smaller compared with those on both Ni anodes. On the other hand, the current losses caused by anodic dissolution of Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloy electrodes were 7.95-4.42, 6.40-7.02, 5.60-6.30, 3.34-6.33, 5.10 and 0.18%, respectively. The anode consumptions of Ni-5 mol% Cu and Ni-5 mol% Si alloys were almost the same or smaller compared with those of Ni sheet and HIPed Ni electrodes, though those of other alloys used were large compared with those of both Ni anodes. Consequently, addition of Cu to the nickel matrix is available for a cheaper cost of anode with keeping a same current efficiency as that on the Ni anode and addition of Si to the nickel matrix is effective for decreasing anode consumption largely. A Ni sheet electrode containing a trace of impurities, such as Co, Mn, Ag and Al, is also favorable as the anode for electrolytic production of NF₃.     

Reaction of a 5α-bromo-6β,19-epoxysteroid with BF3·Et2O/Ac2O: An evidence of a cyclic bromonium cation

Treatment of 3β-acetoxy-5-bromo-6β,19-epoxy-5α-androstan-17-one with Ac₂O and BF₃·OEt₂, produced the cleavage of the epoxy moiety and migration of the bromine atom to afford 3β,19-diacetoxy-6α-bromo-5-hydroxy-5β-androst-17-one in high yield.     

The self-assemblies of a newly designed star-shaped molecule end-capped with bromine atoms studied by scanning tunneling microscopy

A new star-shaped molecule StOF-Br_3 containing oligofluorenes and halogen atoms(Bromine) has been synthesized and studied by Scanning Tunneling Microscopy(STM) at the highly oriented pyrolytic graphite(HOPG) surface.We have obtained the high-resolution self-assembled STM images,from which the highly ordered and closely packed non-porous arrangements of the StOF-Br_3 molecular selfassemblies at the heptanoic acid/HOPG surface could be observed.The molecular models and selfassembled StOF-Br_3 architectures have been given in the following text.Besides,we have also figured out the surface free energy by the density functional theory(DFT) calculation,which proved that the halogen...halogen interaction was strong enough to stabilize the ordered molecular self-assemblies.This work verifies the existence of bromine...bromine interactions,and meanwhile provides a kind of effective approach for quickly building ordered molecular nanoarchitectures with large areas and different geometries.