Early-stage flocculation kinetics of polystyrene latex particles with polyelectrolytes studied in the standardized mixing: Contrast of excess and moderate polyelectrolyte dosage

Standardized mixing procedure was applied to the analysis of flocculation of polystyrene latex (PSL) particles with polyelectrolytes. After confirming the initial enhancement of flocculation rate in the very beginning followed by abrupt stop with excess dosage, attention was shifted to the system of moderate dosage. In the former, effects of ionic strength were further analyzed to find the consistency with adsorption isotherm. In the latter, flocculation started slowly in the beginning, sometime slower than salt-induced rapid coagulation, however, the rate gradually increases in the middle stage. Often, the increased rate exceeds that of salt-induced rapid coagulation. This behavior emerged more clearly in the case of lower ionic strength. This is the indication that the rate of relaxation of polymer on the colloidal surface is a function of surface coverage and ionic strength. The ultimate degree of flocculation is usually higher than that observed for excess dosage. The size distribution of flocs was also examined, however, no clear difference between different experimental conditions was confirmed for the same degree of flocculation.     

Synthesis of a novel rigid molecule family for the investigation of electron and energy transfer

Three new rigid bridging ligands for metal complexation (7=bmb, 8=bqb and 11=btb) were prepared from a rigid triptycene spacer connected to two bipyridine ligands using a Horner–Emmons type reaction. The triptycene spacer is substituted by methoxy groups in the case of bmb and in the case of bqb by a benzoquinone substituent. The corresponding metal complexes (ruthenium and/or osmium) were synthesised and the different luminescence behaviour was tested. They show great potential for the investigation of intramolecular electron and energy transfer reactions. The dinuclear metal complex Ru---bqb---Os is an interesting system in which the bridging ligand bqb acts as a redox switch, able to tune the conductivity for energy or electrons across the bridge.     

Novel Reactions of Organomolybdenum and Organotungsten Compounds: Additive–Reductive Carbonyl Dimerization,Spontaneous Transformation of Methyl Ligands into μ-Methylene Ligands,and Selective Carbonylmethylenation

Hitherto there was no reaction known that permits transformations of R¹R²-CO → 0.5 R¹R²R³C–CR¹R²R³ in one step. This type of additive–reductive carbonyl dimerization is now possible using alkoxy(alkyl)tungsten(v) complexes with aromatic, heteroaromatic or α,β-unsaturated aldehydes and ketones. When a corresponding phenyl complex was employed in a test experiment, it was revealed that an aliphatic ketone could be used as the substrate in this reaction. A second interesting type of reaction is the transformation of CH₃ ligands into μ-CH₂ ligands, which occurs during the treatment of MeLi or Me₃Al with molybdenum or tungsten chlorides (oxidation states VI and V, for Mo additionally IV) at low temperatures with liberation of CH₄. Here, the question arises as to whether the intermediate involved has a terminal CH₂ ligand (Schrock carbene complex) or a μ-CH₃ ligand (CH₃ bound by a two-electron three-center bond to two metal atoms). Of all the μ-CH₂ complexes obtained, those which were synthesized by the action of MeLi on molybdenum chlorides can be recommended as reagents for carbonylmethylenation of aldehydes and ketones. They display high selectivity, very low basicity, a surprising resistance to protons, they are readily available, can be easily modified and, as regards their selective behavior, they have been investigated more thoroughly than other readily accessible carbonylmethylenation reagents of comparable selectivity. The results of NMR spectroscopic investigations on the structure of the μ-CH₂ complexes, and associated reaction mechanisms are discussed. A survey of carbonylmethylenation reagents, which have been reported in the literature, permits comparisons to be made with carbonylmethylenating molybdenum and tungsten complexes.     

How bridging ligands and neighbouring groups tune the gold-gold bond strength

Gold-gold interactions in small polynuclear complexes are analysed using extended Hückel calculations. They are influenced by the nature of the ligand donor atoms, by the bridging ligands, but most by the formal oxidation state of the metal. Au---Au bonds are much stronger in complexes of Au(II) and Au(III), but a weak interaction between two d¹⁰ centres exists for Au(I) complexes, owing to mixing of the s and p orbitals with the d orbitals. Phosphines induce stronger metal-metal bonds when coordinated trans to the Au---Au bond in [Au(II)[(CH₂)₂PPh₂]L]₂ (Ph = phenyl), but have the opposite effect when bonded orthogonally to the metal-metal axis in Au(I) binuclear species. When two gold atoms are bridged by a single carbon atom, belonging either to mesityl (Mes = 2,4,6-Me₃C₆H₂) or CR₂, the former produces stronger Au(I)---Au(I) interactions, reflected in shorter distances. Formal oxidation states are proposed for the gold atoms in two mixed-valence clusters, [Au4(C₆F₅)₂((PPh₃)_{2CH})2(PPh3)2](ClO4)2 and [{(2,4,6-C6F3H2)Au(CH2PPh2CH2)2Au{in2}-Au(CH₂PPh₂CH₂)₂Au](ClO₄)₂. The results suggest a higher oxidation state for the outer gold atoms, in both the T-shaped tetranuclear cluster and the Au₆ linear chain.     

Phosphonio‐benzophospholide Zwitterions as Bridging 8e‐Donor Ligands: Synthetic and Mechanistic Studies

Reactions of the phosphonio‐benzophospholide π‐complexes 3a, b[Cr] with [M(CO)₅(olefin)] or of the σ‐complexes 2a, b[M] (M = Cr, Mo, W) with [M(CO)₃(aren)] lead to the first binuclear complexes 4a, b[CrM] featuring phosphonoio‐benzophospholides as μ‐bridging 8e‐donor ligands to two group 6 metal atoms. The constitution of the products was determined by spectroscopic and X‐ray diffraction studies. Mixed complexes with both group 6 and 7 metals were not accessible. Mechanistic studies showed that the reactions follow a complicated mechanism whose single steps may involve transfer of either M(CO)_n fragments or single CO ligands between complexes; the latter are associated with a σ/π‐coordination isomerization of the benzophospholide unit. Competition between both reaction channels can lead to the formation of product mixtures whose composition is controlled by the relative thermodynamic stabilities of the products. Computational studies suggest that in the more stable isomer of heterobimetallic complexes 4a, b[MM′] end‐on coordination to the heavier and side‐on coordination to the lighter metal atom is preferred.     

[B(O–C6H4–CN)4]– based Silver and Copper Coordination Polymers

A series of new coordination polymers bearing the [B(O–C₆H₄–CN)₄]^– anion was synthesized. Two new, one dimensional coordination frameworks of the type M[B(O–C₆H₄–CN)₄] (M = Ag, Cu) were obtained by salt metathesis. The reactivity towards organic Lewis‐bases was studied. The reaction with bidentate ligands yielded two dimensional networks with the general formula [M(L)][B(O–C₆H₄–CN)₄] {L = 2,2′‐bipyridine, 4,4′‐bipyridine, 1,2‐bis(pyridyl)ethane, 1,4‐diazabicyclo[2.2.2]octane}. The synthesis, properties and single crystal structure are reported.     

A Mixed Valent Trinuclear Nickel Complex

The reaction of Ni(PPh₃)₂Cl₂ with hexahydro‐1,4‐diaza‐2,3,5,6‐tetraphosphorine in toluene leads to a trinuclear mixed valent nickel complex. Crystal structure analysis confirms three nickel atoms which are connected via two bridging chain‐like PNPPNP ligands. Moreover it indicates some remaining electron density at two central phosphorus atoms. DFT calculations on the electronic structure of the title complex suggest either a slightly delocalized unpaired electron at the relevant metal coordinated phosphorus atom or a PHPh entity.     

Synthesis and Single Crystal Structure Characterization of Dinuclear and Polymeric Mixed-ligand Coordination Compounds of Zinc(II) and Cadmium(II) with the Bridging Ligand 1,2-Bis(pyridin-4-ylmethylene)hydrazine

Three d¹⁰-transition-metal coordination compounds [Cd(tfpb)₂(4-bpmh)]_n ( 1 ), [Cd(9-aca)(NO₃)(OHCH₃)(4-bpmh)]_n ( 2 ) and [Zn₂(dpp)₄(4-bpmh)] ( 3 ) with the bridging ligand 4-bpmh were synthesized [4-bpmh = 1,2-bis(pyridin-4-ylmethylene)hydrazine, tfpb = 4,4,4-trifluoro-1-phenylbutane-1,3-dionate, 9-aca = anthracene-9-carboxylate, dpp = 1,3-diphenylpropane-1,3-dionate]. Compounds 1 – 3 were characterized by FT-IR spectroscopy, elemental analysis, and structurally authenticated by X-ray crystallography. Compounds 1 – 3 are constructed by an O,O'-donor ligand including chelating β-diketonates (tfpb, dpp) in 1 and 3 and a carboxylate ligand (9-aca) in 2 in combination with a linear neutral bidentate and bridging N-ligand (4-bpmh). The assembly and action of the bridging 4-bpmh ligand leads to one-dimensional coordination polymers in 1 , 2 and to a dinuclear coordination complex in 3 . The structures and the solid-state supramolecular interactions for studying the crystal packing fashions of 1 – 3 were analyzed. The supramolecular interactions including hydrogen bonding, C–H ··· π, π ··· π, and C–F ··· π in 1 , 2 , and 3 were founded.     

甲壳素-壳聚糖对皂土悬浮液的絮凝

研究了三种摩尔质量大体相同而脱乙酰度分别为93%、78%和62%的甲壳素-壳聚糖在pH=3～6范围内对皂土悬浮液的絮凝性质, 并与非离子型絮凝剂聚丙烯酰胺作了比较, 证明含自由氨基的甲壳素-壳聚糖在酸性溶液中形成阳离子聚电解质后. 对带负电的皂土悬浮颗粒有很好的絮凝能力. 通过对上述三种聚合物的絮凝能力、在皂土颗粒表面的吸附量等测定, 认为絮凝中桥连机制起了主导作用, 但聚合物所带正电荷则有利于被皂土颗粒所吸附, 电中和还降低了颗粒间的静电排斥, 这都对桥连絮凝起了促进作用. 聚丙烯酰胺分子在水中不带电, 故当介质pH升高使皂土颗粒双电层变厚时, 絮凝能力迅速下降.     

Single-Molecule Force Spectroscopy of DNA-Based Reversible Polymer Bridges: Surface Robustness and Homogeneity

Single-molecule force spectroscopy, as implemented in an atomic force microscope, provides a rarely used method by which to monitor dynamic processes that occur near surfaces. Here, a methodology is presented and characterized that facilitates the study of polymer bridging across nanometer-sized gaps. The model system employed is that of DNA-based reversible polymers, and an automated procedure is introduced that allows the AFM tip–surface contact point to be automatically determined, and the distance d between opposing surfaces to be actively controlled. Using this methodology, the importance of several experimental parameters was systematically studied, e.g. the frequency of repeated tip/surface contacts, the area of the substrate surface sampled by the AFM, and the use of multiple AFM tips and substrates. Experiments revealed the surfaces to be robust throughout pulling experiments, so that multiple touches and pulls could be carried out on a single spot with no measurable affect on the results. Differences in observed bridging probabilities were observed, both on different spots on the same surface and, more dramatically, from one day to another. Data normalization via a reference measurement allows data from multiple days to be directly compared.