A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

1H and 13C NMR spectroscopic study of oxidation of D,L‐cystine and 3,3′‐dithiobis(propionic acid) with hydrogen peroxide in aqueous solution

The oxidation of symmetrical disulfides [D ,L ‐cystine ( 1 ) and 3,3′‐dithiobis(propionic acid) ( 2 )] with hydrogen peroxide in D₂O–NaOH solution (pH 10–11) was studied by NMR spectroscopy. Assignments of the proton and carbon NMR signals of starting materials ( 1 and 2 ) and products of oxidation are based on conventional 1D NMR methods (DEPT, selective spin decoupling). Formation of C—S bond cleavage products or, in case of 2 , partially oxidized intermediates was not detected. The accelerating effect of Cu²⁺ cations, but not Fe³⁺ cations, on the oxidation rate of 1 in basic medium was demonstrated. Copyright © 2002 John Wiley & Sons, Ltd.     

Novel radical‐responsive MRI contrast agent based on paramagnetic liposomes

A novel, radical responsive MRI contrast agent based on a gadolinium chelate conjugated to a liposome through a disulfide linker was synthesized, with the aim of pursuing the in vivo mapping of radicals. The liposome was prepared by incorporating a thiol‐activated phospholipid, which was subsequently reacted with a gadolinium chelate containing a free thiol group. The long reorientational motion of the supramolecular adduct endows the paramagnetic agent with a relaxivity significantly higher than that of the free complex. The disulfide bond represents a radical‐sensitive moiety and a large decrease in contrast efficacy (T₁ relaxivity) is shown upon its cleavage. A preliminary assessment of the system was made by means of in vitro gamma‐irradiation and thiol–disulfide bond exchange with dithiothreitol. Both methods showed a clear dose‐dependent decrease in T₁‐relaxivity. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of poly(p‐phenylene sulfide) from bis(4‐bromophenyl) disulfide

Improved reaction conditions for the preparation of poly(p‐phenylene sulfide) (PPS) directly from bis(4‐bromophenyl) disulfide (BBD) have been established. Heating BBD with magnesium metal afforded only a low molecular weight polymer. PPS with a melting temperature around 280 °C was obtained from BBD in the presence of sodium carbonate or zinc metal. The best results were obtained with the addition of a catalytic amount of KI to the zinc–BBD mixture. Polymers prepared by the above methods are semicrystalline and dissolve in 1‐chloronaphthalene and have properties comparable to commercial PPS. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 900–904, 2006     

Chelate mit Diimin- und Thiol-Struktur: Analytische Anwendung der Di-(4-substituierten)-thiosemicarbazone von 1,2- und 1,3-Diketonen

Zusammenfassung In der Gruppe der vierzähnigen Liganden mit Diimin- und Thiolstruktur bilden die Bisthiosemicarbazone von 1,2- und 1,3-Diketonen mit 4-substituierten Thiosemicarbaziden intensiv gefärbte Metallchelate, die für extraktionsphotometrische Bestimmungen in der Spurenanalyse verwendet werden können. Die molaren Extinktionskoeffizienten liegen im Bereich 5000–16000. Die leichte Zugänglichkeit von 4-substituierten Thiosemicarbaziden über die Reaktion von Isothiocyanaten mit Hydrazin bietet eine große Auswahl von Reagentien, besonders für die Flüssig-Chromatographie zur Trennung von komplexen Chelatgemischen.Die Arbeit wurde aus den Mitteln der Deutschen Forschungsgemeinschaft Bonn-Bad Godesberg gefördert.     

Synthesis and electrochemistry of Group 6 tetracarbonyl (N,N′-bis(ferrocenylmethylene)ethylenediamine)metal(0) complexes

Thermal substitution reaction of Cr(CO)₄(η^2:2-1,5-cyclooctadiene), Mo(CO)₄(η^2:2-norbornadiene), and W(CO)₅(η²-bis(trimethylsilyl)ethyne) with N,N′-bis(ferrocenylmethylene)ethylenediamine (bfeda) yields M(CO)₄(bfeda) complexes which could be isolated from the reaction solution and characterized by elemental analysis, MS, IR, and NMR spectroscopy. In the case of tungsten, W(CO)₅(bfeda) is formed as intermediate and then undergoes the ring closure reaction yielding the ultimate product W(CO)₄(bfeda). The electrochemical behavior of the M(CO)₄(bfeda) complexes was studied by using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) in dichloromethane with tetrabutylammonium tetrafluoroborate as electrolyte. Constant potential electrolysis of the complexes was performed successively at their peak potentials at 0 °C in their CH₂Cl₂ solution and the electrolysis was followed by in situ recording the electronic absorption spectra in every 5 mC. In the electrolysis of Cr(CO)₄(bfeda), the central Cr(0) is oxidized first and electrolysis continues with oxidations of two ferrocenyl groups until the end of totally three moles of electron passage per mole of complex. In the electrolysis of Mo(CO)₄(bfeda) and W(CO)₄(bfeda) the first oxidation occurs on the central atom forming a short-lived species which undergoes an intramolecular one-electron transfer and is reduced back to M(0) while one of the ferrocene units is oxidized to the ferrocenium cation at the same time. This indicates that the electron is transferred from iron to the central metal atom.     

Novel structure-defined chiral bis(oxazolinyl)thiophenes for Ru-catalyzed asymmetric cyclopropanation

The novel structures of sulfur-containing chiral bis(oxazoline) compounds which have been synthesized have been determined by X-ray crystal diffraction analyses. A high enantioselectivity (ee >99%) in the asymmetric cyclopropanation of diphenylethene with diazoester using the bis(oxazoline)-Ru(II) catalyst was obtained.     

Synthesis of bis(alk-3-en-1-ynyl)benzene with either E- or Z-configuration via a one-pot three-component coupling reaction and its optical properties

A convenient, efficient and stereoselective synthesis of a range of bis(alk-3-en-1-ynyl)benzenes with E- and Z-configuration is described. The protocol involves Cu-mediated cross-coupling reaction of (E)- and (Z)-alk-1-enyldisiamylboranes with (trimethylsilyl)ethynyl bromide and Pd/Cu-catalyzed cross-coupling reaction with diiodobenzene. The sequential cross-coupling reaction proceeds readily under extremely mild conditions in a one-pot manner to afford bis(alk-3-en-1-ynyl)benzenes in good to excellent yields. The optical properties of the products are also described.     

3D H-bonding networks self-assembly from pyridinium derivatives and bis(maleonitriledithiolato)zincate(II)

The two ion-pair complexes, [pyH]₂[Zn(mnt)₂] (1) and [4,4′-bipyH₂]-[Zn(mnt)₂] (2), were synthesized, where mnt²⁻ denotes maleonitriledithiolate, and [pyH]⁺, [4,4′-bipyH₂]²⁺ represent pyridinium and diprotonated 4,4′-bipyridinium, respectively. Their single crystal structures show that there are strong bifurcated H-bonding interactions between the cations of the pyridinium derivative and the [Zn(mnt)₂]²⁻ anions in both 1 and 2. The bifurcated H-bonding interactions between the N–H of the pyridiniums and the CN groups of the mnt²⁻ ligands give rise to a 2D layered H-bonding network, the adjacent layers come together in such way as mutual embrace to give a tight pack, thus 2D hydrogen-bonding sheets further develop into 3D H-bonding networks through weak C–HS and ππ stacking interactions in 1. As for 2, the cations and anions connect into several types of H-bonding macrorings ([2+2], [3+3] and [4+4]), these H-bonding macrorings fuse to extend into 2D layered structure, the interpenetration between [3+3] and [4+4] type H-bonding macrorings in the adjacent layers give further rise to novel 3D extended H-bonding networks, in which there are clearly parallel stacks of cations and the chelate rings of anions.     

Removal of Carbamazepine in Aqueous Solution by CoS2/Fe2+/PMS Process

Carbamazepine (CBZ), as a typical pharmaceutical and personal care product (PPCP), cannot be efficiently removed by the conventional drinking water and wastewater treatment process. In this work, the CoS₂/Fe²⁺/PMS process was applied for efficient elimination of CBZ. The CBZ removal efficiency of CoS₂/Fe²⁺/PMS was 2.5 times and 23 times higher than that of CoS₂/PMS and Fe²⁺/PMS, respectively. The intensity of DMPO-HO• and DMPO-SO4•− followed the order of Fe²⁺/PMS < CoS₂/PMS < CoS₂/Fe²⁺/PMS, also suggesting the CoS₂/Fe²⁺/PMS process has the highest oxidation activity. The effects of reaction conditions (e.g., CoS₂ dosage, Fe²⁺ concentration, PMS concentration, initial CBZ concentration, pH, temperature) and water quality parameters (e.g., SO42−, NO3−, H2PO4−, Cl−, NH4+, humic acid) on the degradation of CBZ were also studied. Response surface methodology analysis was carried out to obtain the best conditions for the removal of CBZ, which are: Fe²⁺ = 70 µmol/L, PMS = 240 µmol/L, CoS₂ = 0.59 g/L. The sustainability test demonstrated that the repeated use of CoS₂ for 8 successive cycles resulted in little function decrease (<10%). These findings suggest that CoS₂/Fe²⁺/PMS may be a promising method for advanced treatment of tailwater from sewage treatment plant.