Rail vs truck transport of biomass

This study analyzes the economics of transshipping biomass from truck to train in a North American setting. Transshipment will only be economic when the cost per unit distance of a second transportation mode is less than the original mode. There is an optimum number of transshipment terminals which is related to biomass yield. Transshipment incurs incremental fixed costs, and hence there is a minimum shipping distance for rail transport above which lower costs/km offset the incremental fixed costs. For transport by dedicated unit train with an optimum number of terminals, the minimum economic rail shipping distance for straw is 170 km, and for boreal forest harvest residue wood chips is 145 km. The minimum economic shipping distance for straw exceeds the biomass draw distance for economically sized centrally located power plants, and hence the prospects for rail transport are limited to cases in which traffic congestion from truck transport would otherwise preclude project development. Ideally, wood chip transport costs would be lowered by rail transshipment for an economically sized centrally located power plant, but in a specific case in Alberta, Canada, the layout of existing rail lines precludes a centrally located plant supplied by rail, whereas a more versatile road system enables it by truck. Hence for wood chips as well as straw the economic incentive for rail transport to centrally located processing plants is limited. Rail transshipment may still be preferred in cases in which road congestion precludes truck delivery, for example as result of community objections.     

Comparison of yellow poplar pretreatment between NREL digester and sunds hydrolyzer

Single-stage cocurrent dilute acid pretreatments were carried out on yellow poplar (Liriodendron tulipifera) sawdust using an as-installed and short residence time modified pilot-scale Sunds hydrolyzer and a 4-L bench-scale NREL digester (steam explosion reactor). Pretreatment conditions for the Sunds hydrolyzer, installed in the NREL process development unit (PDU), which operates at 1 t/d (bone-dry t) feed rate, spanned the temperature range of 160 – 210°C, 0.1 – 1.0% (w/w) sulfuric acid, and 4-10-min residence times. The batch pretreatments of yellow poplar sawdust in the bench-scale digester were carried out at 210 and 230°C, 0.26% (w/w) sulfuric acid, and 1-, 3-, and 4-min residence times. The dilute acid prehydrolysis solubilized more than 90% of the hemicellulose, and increased the enzymatic digestibility of the cellulose that remained in the solids. Compositional analysis of the pretreated solids and liquors and mass balance data show that the two pretreatment devices had similar pretreatment performance.     

Coordinating California’s efforts to promote waste to alcohol production

Alcohol fuels produced from biomass can improve air quality, enhance energy security, create employment opportunities, and reduce waste disposal problems. Opportunities in California exist to produce alcohols from waste streams from various sectors of the economy. Government agencies have promoted waste-to-alcohol activities, but efforts have been inconsistent and intermittent. Often these efforts have been hindered by contradictory but mandate-driven policies. A prudent approach to coordinate statewide efforts includes the development of an integrated statewide policy to examine barriers that impede private sector business efforts to produce alcohols from biomass. A multi-agency task force to promote research, development, commercialization, and marketing efforts for biomass-produced alcohols is desirable. The views and opinions contained in this document do not necessarily reflect those of the California Energy Commission, its staff, management, or the State of California.     

Rapid biomass analysis

New, rapid, and inexpensive methods that monitor the chemical composition of corn stover and corn stover-derived samples are a key element to enabling the commercialization of processes that convert stover to fuels and chemicals. These new techniques combine near infrared (NIR) spectroscopy and projection to latent structures (PLS) multivariate analysis to allow the compositional analysis of hundreds of samples in 1 d at a cost of about $10 each. The new NIR/PLS rapid analysis methods can also be used to support a variety of research projects that would have been too costly to pursue by traditional methods.     

Overwhelming electrochemical oxygen reduction reaction of zinc-nitrogen-carbon from biomass resource chitosan via a facile carbon bath method

Developing high efficiency and low cost electrocatalysts is critical for the enhancement of oxygen reduction reaction (ORR), which is the fundamental for the development and commercialization of renewable energy conversion technology. Herein, zinc-nitrogen-carbon (Zn-N-C) was prepared by using biomass resource chitosan via a facile carbon bath method. The obtained Zn-N-C delivered a high specific surface area (794.7 cm²/g) together with pore volume (0.49 cm³/g). During the electrochemical evaluation of oxygen reduction reaction (ORR), Zn-N-C displayed high activity for ORR with an onset potential E₀ = 0.96 V_RHE and a half wave potential E_1/2 = 0.86 V_RHE, which were more positive than those of the commercial 20 wt% Pt/C benchmark catalyst (E₀ = 0.96 V_RHE and E_1/2 = 0.81 V_RHE). In addition, the Zn-N-C catalyst also had a better stability and methanol tolerance than those of the Pt/C catalyst.     

生物质裂解产物的制备及HPLC检测其成分的虚拟仿真实验开发

In order to improve university laboratory teaching and practical education under the background of information technology, as well as overcome the difficulty for practical training, develop a virtual simulation experiment platform for rapid pyrolysis of natal materials and high-performance liquid chromatographic (HPLC) detection of its components. The experiment integrates the actual operation process of the plant to produce cleaved products by rapid pyrolysis of biomass with HPLC detection. The virtual experiment is divided into biomass sample pretreatment, rapid biomass pyrolysis, bio-oil extraction, and HPLC determination of complex components, making the biomass cleavage workshop "real" through simulation. This virtual simulation experiment fully integrates the utilization of biomass resources and basic chemistry courses (such as organic chemistry, instrumental analysis, chemical engineering principles, etc.), which are widely involved in agricultural and forestry majors with advantageous characteristics value.     

基于差示扫描量热技术的生物质热解两步连续反应模型研究

采用差示扫描量热分析仪对我国的一种生物质试样在空气气氛中进行了实验, 发现试样从常温到923 K高温的低速升温过程中, 经历了两步明显的放热过程. 对放热机理的分析表明, 第一步主要是由半纤维素和纤维素的有氧热解过程控制, 第二步放热过程则受木质素热解和炭的氧化反应的共同作用. 采用等转化率方法和优化计算方法, 对热解过程的动力学模型进行了研究, 结果表明, 两步连续反应机理可用于描述生物质在空气气氛中热解的放热动力学.     

Thermogravimetric study of the pyrolysis of waste wood

A thermogravimetric study of the pyrolysis of three different types of waste wood (forest wood, old furniture and used pallets) is carried out in a TGA equipment using dynamic and isothermal techniques. Isothermal runs were carried out at two temperature levels, one between 225° and 325°C (low range) and the other, between 700° and 900°C (high range). Results show a good agreement between the kinetic parameters obtained from either dynamic or isothermal techniques. It must be remarked that the own chemical composition of each type of wood together with the compounds added to the wood for each application, play a fundamental role in the kinetic behavior of their thermal decomposition.     

Assessment of various carbon sources and nutrient feeding strategies for Panax ginseng cell culture

Ginseng (root of Panax ginseng C. A. Meyer) cells were cultivated on medium supplemented with various carbohydrates including sucrose, glucose, and fructose, at initial concentrations ranging from 10 to 110 g/L. Sucrose was shown to be the superior carbon source to the monosaccharides for ginseng cell growth and the optimal concentration was between 30 and 50 g/L. An increase in the initial concentration within this range increased the maximum cell density and growth index significantly, whereas much higher concentrations inhibited cell growth. Feeding of sucrose and some other medium components during the growth (fed-batch mode) was more effective in enhancing the cell growth and biomass productivity, increasing the growth index by more than 60–70% and biomass productivity by more than 50%.     

Dilute acid pretreatment of softwoods

Selective thinning of forests in the western United States will generate a large, sustainable quantity of softwood residues that can be an attractive feedstock for fuel ethanol production. The major species available from thinning of forests in northern California and the eastern Rocky Mountains include white fir (Abies concolor), Douglas fir (Pseudotsuga menziesii), and Ponderosa pine (Pinus ponderosa). Douglas fir chips were soaked in 0.4% sulfuric acid solution, then pretreated with steam at 200 – 230°C for 1 – 5 min. After pretreatment, 90 – 95% of the hemicellulose and as much as 20% of the cellulose was solubilized in water, and 90% of the remaining cellulose can be hydrolyzed to glucose by cellulase enzyme. The prehydrolysates, at as high as 10% total solid concentration, can be readily fermented by the unadapted yeastSaccharomyces cerevisiae D₅A.