BANDED TEXTURE FORMATION IN NEMATIC SOLUTION OF POLY (1,4-BENZAMIDE) IN SULFURIC ACID

The banded texture in films prepared from nematic poly (1,4-benzamide) (PBA)/H_2SO_4 solution by shearing and without shearing has been studied by using microscopy techniques. The kinetic parameters of banded texture formation γ_c and τ_b were measured for nematic solution of PBA by using parallel-plate shearing apparatus. The banded texture was also observed in randomly packed domains for nematic solution of PBA on standing without shearing. The properties of banded texture show no difference between the two samples with or without shearing.     

聚(丁二酸丁二酯-co-丁二酸丙二酯)的等温结晶行为研究

以1,4-丁二酸、1,4-丁二醇和1,3-丙二醇为原料通过直接熔融缩聚法合成了聚丁二酸丁二酯(PBS),聚丁二酸丙二酯(PPS)和聚(丁二酸丁二酯-co-丁二酸丙二酯)(PBSPS)等脂肪族聚酯.利用1H-NMR,WAXD,DSC和POM等研究了聚酯的结晶结构和结晶动力学过程等结晶行为.PBSPS的结晶晶型与PBS一致,说明只有丁二酸丁二酯(BS)单元结晶而丁二酸丙二酯(PS)单元处于无定形区.聚酯等温结晶后,在升温熔融过程中出现了多重熔融峰.分析表明多重熔融峰主要来自于聚酯升温过程中的熔融-重结晶行为.利用Avrami方程分析了聚酯的等温结晶动力学,Avrami指数n为2.2~2.8,说明聚酯等温结晶时主要以异相成核的三维生长方式进行;随着PS单元的增多,聚酯的表观结晶活化能升高,也就是说BS单元的结晶变得困难.POM观察到聚酯等温结晶时都出现了环带球晶现象,球晶形态会随着结晶温度和化学结构差异而改变.     

Inductive effect for the phase stability in hydrogen bonded liquid crystals,x-(p/m)BA:9OBAs

A new series of hydrogen bonded liquid crystal (HBLC) complexes, made up with substituted benzoic acids (BAs) and nonyloxy benzoic acid, viz., x-(p/m)BA:9OBAs are reported for x = F, Cl, Br and –CH₃ substituted at para (p) or meta (m) positions of BA moiety. Proton nuclear magnetic resonance (¹H-NMR) spectrum confirms the HBLC complex. Infra red (IR) spectrum confirms linear, double and complementary type of hydrogen bonding (HB) between x-(p/m)BAs and 9OBA. The liquid crystal (LC) phases are characterised by polarisation optical microscopy (POM) and differential scanning calorimetry (DSC) techniques. x-(p/m)BA:9OBA exhibit N, C and G LC phase variance. HB induces tilted phases and enhances LC phase stability. The influence of configuration, size, electronegativity, electron directing capacity and inductive nature of substituent (x) is investigated for the stability of LC phases. An overview of the LC phase data indicates predominant ‘negative inductive effect’ in HBLCs with electron withdrawing substituents. Inductive effect operates effectively for para substitutions. Results are discussed in the wake of reports in other HBLCs.     

Liquid crystal mixtures for potential infrared applications

Liquid crystals (LCs) with diazo linkages have high dielectric and optical anisotropy. Two newly synthesized liquid crystalline compounds were dissolved in room temperature LC hosts, E7 and PTTP-24/36, to assess their properties. It was found that these mixtures have higher birefringence, larger dielectric anisotropy, and better elastic properties than the hosts. Satisfactory viscoelastic coefficients were also obtained for these mixtures, showing that they are promising LC materials for applications in the near IR region.     

Liquid crystal parameters through image analysis

A technique which combines image analysis and polarising optical microscope (POM) is a useful tool for the physical investigation of discotic liquid crystals, such as hexabutoxytriphenylene and hexahexyloxytriphenylene. This investigation includes the phase transitions, optical properties and order parameter as a function of temperature. Textures of discotic liquid crystals are captured as a function of temperature using POM. These microscopic textures are analysed using MATLAB software to compute statistical parameters, Legendre moments, optical parameters and order parameters of discotic liquid crystal samples. Compared with other techniques in the literature, the proposed methodology is a reliable and very simple technique for the physical investigation of liquid crystals.     

The liquid crystal properties of symmetric and non-symmetric dimers based on the azobenzene mesogenic group

A novel system of symmetric and non-symmetric dimers containing azobenzene groups has been synthesized and studied in an attempt to understand further the molecular origins of the intercalated smectic phases. For the non-symmetric dimers, the lack of symmetry was derived solely from the differences in length of the two terminal alkyl chains. Both the spacer and terminal chain lengths were varied. The spacer length was found to exert a profound influence on the clearing temperatures of these materials and a large odd-even effect was observed for the series. The smectic A phase stability was observed to increase with the terminal chain length, yet decrease with increasing spacer length. X-ray diffraction has revealed the structure of the smectic A phase of both the symmetric and non-symmetric azobenzene dimers to be of the monolayer type and not intercalated. The existence of the intercalated phase has previously been explained in terms of either a charge-transfer interaction, or by an electrostatic quadrupolar interaction. However, it has been thought that it may also be the result of an excluded volume or space filling constraint. For the non-symmetric liquid crystal dimers described here, a charge-transfer interaction should be minimal, as should the stabilization from the quadrupolar interaction between the two mesogens. However, it appears that some sort of specific interaction is required to stabilize the intercalated structure.     

Multi‐crystalline silicon solar cells with metal‐assisted nano‐texturing using HNO3 as hole injection agent

In this study, metal‐assisted etching (MAE) with nitric acid (HNO₃) as a hole injecting agent has been employed to texture multi‐crystalline silicon wafers. It was previously proven that addition of HNO₃ enabled control of surface texturing so as to form nano‐cone shaped structures rather than nanowires. The process parameters optimized for optically efficient texturing have been applied to multi‐crystalline wafers. Fabrication of p‐type Al:BSF cells have been carried out on textured samples with thermal SiO₂/PECVD‐SiN_x stack passivation and screen printed metallization. Firing process has been optimized in order to obtain the best contact formation. Finally, j_sc enhancement of 0.9 mA/cm² and 0.6% absolute increase in the efficiency have been achieved. This proves that the optimized MAE texture process can be successfully used in multi‐crystalline wafer texturing with standard passivation methods.

J –V curves and SEM images of the nano and iso‐textured samples. j_sc enhancement of 0.9 mA/cm² together with 0.6% absolute efficiency gain was observed on nano‐textured samples.     

MECHANICAL PERTURBATION INDUCED MOLECULAR ALIGNMENTS IN A SIDE-CHAIN LIQUID CRYSTALLINE POLYACETYLENE, POLY{10-[4-(4''-METHOXYPHENOXY-CARBOML)PHENOXYCARBONYL]-1-DECYNE}*

A new liquid crystalline polyacetylene containing a phenyl benzoate mesogen (5) is synthesized,whose mesomorphic properties are found to be easily "tunab1e" by simple mechanical perturbation. Thepolymerization of 10- [ 4 - (4' -methoxyphenoxycarbonyl )phenoxycarbonyl] - 1 -decyne (4 ) in itiated by theWCl_6-Ph_4Sn/dioxane complex yields polymer 5 with a M_w of 28400. The molecular structure of 5 ischaracterized by NMR, IR, and UV spectroscopy and its liquid crystalline behavior is investigated by DSC,POM, and XRD analysis. Upon mechanical perturbation, 5 exhibits unusual agitation-induced high-strengthdisclinations, shear-induced inversion walls, and solidification-induced banded textures. Such phenomenahave been observed in the main-chain liquid crystalline polymers with rigid backbones, but have seldom beenreported for the side-chain liquid crystalline polymers with flexible backbones, suggesting that the rigidpolyacetylene backbone of 5 plays a constructive role in inducing the novel molecular alignments.     

The banded spherulites of iPP induced by pressure vibration injection molding

Isotactic polypropylene(i PP) samples obtained by pressure vibration injection molding(PVIM) and conventional injection molding(CIM) were studied by polarized-light microscopy(PLM), respectively. It was found that the alternating bright and dark banded spherulites were generated in the transitional region of PVIM parts. It is the first time that the banded spherulites of isotactic polypropylene were observed in polymer processing. What's more, the banded spherulites were proved to be constituted of ?-form crystal by hot stage polarized-light microscopy(HT-PLM) and wide angle X-ray diffraction(WAXD). Morphology of the banded spherulites was also studied by scaning electronical microscopy(SEM).     

Studies on the phase properties of lyotropic liquid crystals of Brij35/sodium oleate/oleic acid/water system:By means of polarizing microscope,SAXS,~2H-NMR and rheological methods

The pseudo-quaternary phase diagram of Brij35/sodium oleate/oleic acid/water systems has been investigated, and the liquid crystal area has been identified, which covers about two thirds of the whole phase diagram. The liquid crystal structure and behavior have been also studied by using polarizing texture, small angle X-ray scattering, 2H-NMR and rheometer etc. The result shows that when the composition of the system changes along the line of AA′ in this large liquid crystal region, the structural change is cubic→cubic/lamellar→lamellar→lamellar/hexagonal→hexagonal. Meanwhile, we made the first attempt of systematic study of the rheological properties of the above system. The lattice constants of cubic and hexagonal liquid crystals are 10.53 and 5.68 nm, respectively.