Resistivity－temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere

The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ－T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ－T curve also showed that the orthorhombic－tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods.     

Soluble,saturated‐red‐light‐emitting poly(p‐phenylenevinylene) containing triphenylamine units and cyano groups

A conjugated poly(p‐CN‐phenylenevinylene) (PCNPV) containing both electron‐donating triphenylamine units and electron‐withdrawing cyano groups was prepared via Knoevenagel condensation in a good yield. Gel permeation chromatography suggested that the soluble polymer had a very high weight‐average molecular weight of 309,000. A bright and saturated red emission was observed under UV excitation in solution and film. Cyclic voltammetry showed that the polymer presented quasi‐reversible oxidation with a relatively low potential because of the triphenylamine unit. A single‐layer indium tin oxide/PCNPV/Mg–Ag device emitted a bright red light (633 nm). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3947–3953, 2004     

Influence of relaxation effects on probabilities of the 2s2p35S2－2s22p2 3P1，2 intercombination transitions in NII

Transition probabilities of the 2s2p^3 {}^5S_2－2s^22p^2 {}^3P_{1,2} intercombination transitions in NII have been calculated by using a large-scale multiconfiguration Dirac－Fock method. In the calculation the most important effects of relativity, correlation, and relaxation are considered. From the calculated transition probabilities, the lifetime of the 2s2p^3 {}^5S_2 metastable state is derived. The result is in excellent agreement with the latest experimental result. In the meantime the influence of anomalously strong relaxation effects on probabilities of the 2s2p^3 {}^5S_2－2s^22p^2 {}^3P_{1,2} lines in NII have been found.     

Electronic spectral and photophysical properties of some p-phenylenevinylene oligomers in solution and thin films

A comprehensive photophysical and spectroscopic study of a new class of p-phenylenevinylene oligomers (PPV-trimers) possessing different alkyl and alkyloxy sidechain substituents and different end groups (aldehyde, CC, phenylene and anthracene units) was undertaken in solution at room temperature (293 K), low temperature (77 K) and in thin films. The study comprises absorption, emission and triplet–triplet absorption spectra, together with quantitative measurements of quantum yields (fluorescence, intersystem crossing, internal conversion and singlet oxygen formation) and lifetimes. The data allow the determination of rate constants for all decay processes. From these, several conclusions could be drawn. Changing from alkyl to alkyloxy substituents does not change fluorescence and internal conversion yields but decreases the (already small) intersystem crossing yield. The introduction of anthracene at the terminal ends of the PPV-trimers leads to the lowest fluorescence yield reported in this study. Of particular importance is the fact that the fluorescence quantum yields in films are of the same order of magnitude as those in solution, which suggests the potential for use of these oligomers for light-emitting device applications. With one of the alkyloxy derivatives, a more detailed study of the early part of the fluorescence decay was made, and it was found that upon excitation a fast conformational relaxation process of the initially excited oligomer occurs, leading to a more planar conjugation segment.     

有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

SO4●－自由基氧化酪氨酸反应中的溶剂效应

研究了水-乙腈混合溶液中SO4●－自由基氧化酪氨酸的反应.实验结果表明，SO4●－自由基氧化酪氨酸的反应机制不因乙腈的加入而改变，但所产生的瞬态粒子的动力学行为受到较大影响.随介质中乙腈体积分数的增加，SO4●－的衰变速率减慢而酪氨酸中性自由基（TyrO●）的衰变速率加快.我们认为这两种自由基所呈现出来的相反的溶剂效应是由于其所带电荷的不同.随介质中乙腈体积分数的增加，SO4●－氧化酪氨酸的反应速率减慢.这一实验结果意味着，在有机溶剂存在的情况下TyrO●/ TyrOH的氧化还原电势可能发生了变化，从而旁证了关于TyrO●/ TyrOH的氧化还原电势因酪氨酸从游离状态变到肽或蛋白质中而发生变化的推测.     

Co—Mo／MgO—Al2O3水煤气耐硫变换催化剂失活的研究

利用Ｘ－射线衍射，扫描电镜，拉曼光谱，等离子发射光谱和比表面测定等方法研究了不同状态下失活及新鲜催化剂的结构，杂种类及含量。结果表明，超温使催化剂晶化明显，制备方法对催化剂结构有直接影响，再生使其强度降低，条形催化剂比较容易粉化，无机杂质是次要的失活原因。     

Preparation of symmetrical and unsymmetrical monomers towards bridge trifluoromethylated poly(p-phenylenevinylene)

The preparation and identification of a series of trifluoromethylated and bis(trifluoromethylated) precursors and monomers for bridge substituted trifluoromethylated poly(p-phenylenevinylene) (PPV) is reported. These monomers were prepared in several steps from terephthaldicarboxaldehyde and they contain symmetrical and unsymmetrical combinations of leaving groups and/or polarizers, including chlorides, sulfoxides, sulphones, tosylates and S-methyl (and also O-ethyl) xanthates. The electron withdrawing effect of the trifluoromethyl group dominated the regioselectivity of substitution, thus allowing the convenient and selective formation of unsymmetrically substituted products in high yield.     

The influence of preparation method of OC1OC6-PPV films on the photo-oxidation process

Poly(p-phenylene vinylene) (PPV) derivatives are well known for their applications in polymer light emitting diodes (PLEDs). PPV derivatives are highly susceptible to photo-oxidation though, which is mainly caused by the scission of the vinyl double bond on the polymer backbone. In this work, we show that Langmuir-Blodgett (LB) films are less degraded than cast films of a PPV derivative (OC₁OC₆-PPV). Both films had similar thickness (∼50 nm) to allow for a more realistic comparison. Degradation was monitored with UV-vis and FTIR spectroscopies. The results indicated that cast films were completely degraded in ca. 400 min, while LB took longer time, i.e. about four times the values for the cast films. The differences can be attributed to the more compact morphology in the LB than in the cast films. With a compact morphology the diffusion of oxygen in the LB film is hampered and this causes a delay in the degradation process.     

BBDMS-PPV/ITO界面结构ADXPS研究

聚合物电致发光器件（Polymer Electroluminescent Device,PLED)已显示出广阔的应用前景^[1-6]。已往人们比较重视阴极材料的选择及相关金属与有机界面的研究^[7],而有关发光层或空穴传输层与阳极ITO膜之间的界面结构及化学问题则少见报道。事实上,ITO膜与有机层之间的作用对器件的可靠性及寿命具有更为严重的影响^[8,9]。由于异质界面的过渡层结构复杂,以纳米尺度上化学组成是非计量比的,因此对这种极薄的埋藏界面的研究方法还需进一步探索。本文通过模型试样制备和变角X射线光电子谱（ADXPS）技术,对PLED中共轭导电聚合物聚2,5－二（二甲基正丁基硅基）对苯乙烯撑（BBDMS－PPV）与阳极ITO膜所形成的界面结构进行了初步研究。