Bimetallic Covalent Organic Frameworks for Constructing Multifunctional Electrocatalyst

Covalent organic frameworks (COFs) are a new class of crystalline porous polymers comprised mainly of carbon atoms, and are versatile for the integration of heteroatoms such as B, O, and N into the skeletons. The designable structure and abundant composition render COFs useful as precursors for heteroatom-doped porous carbons for energy storage and conversion. Herein, we describe a multifunctional electrochemical catalyst obtained through pyrolysis of a bimetallic COF. The catalyst possesses hierarchical pores and abundant iron and cobalt nanoparticles embedded with standing carbon layers. By integrating these features, the catalyst exhibits excellent electrochemical catalytic activity in the oxygen reduction reaction (ORR), with a 50 mV positive half-wave potential, a higher limited diffusion current density, and a much smaller Tafel slope than a Pt-C catalyst. Moreover, the catalyst displays superior electrochemical performance toward the hydrogen evolution reaction (HER), with overpotentials of −0.26 V and −0.33 V in acidic and alkaline aqueous solution, respectively, at a current density of 10 mA cm⁻². The overpotential in the catalysis of the oxygen evolution reaction (OER) was 1.59 V at the same current density.     

负载型双金属簇催化剂的多相一氧化碳加氢反应性能

负载型双金属簇催化剂的多相一氧化碳加氢反应性能索全伶，李晔（内蒙古工业大学化学工程系，呼和浩特０１００６２）殷元骐，金道森（中国科学院兰州化学物理研究所，兰州７３００００）关键词一氧化碳加氢，多相催化，双金属簇催化剂，钾效应。１．引言异核金属羰基簇作...     

SMSI effect on ceria supported Cu-Pd catalysts in the hydrogenation of 1,3-butadiene

Ceria-supported copper-palladium catalysts have been tested in the hydrogenation of 1,3-butadiene. The SMSI behavior of the bimetallic catalysts depended on the temperature of reduction. They were analyzed by H₂ chemisorption and XPS.     

Synthesis and crystal structures of heterobimetallic Fe-Cd,Fe-Zn,and Fe-In complexes containing hemilabile phosphorus/oxygen and silicon/oxygen bridging ligands

The reactions of K[Fe{Si(OMe)₃}(CO)₃(PY)][PY=Ph₂PCH₂C(O)Ph, Ph₂PCH₂C(O)[(-C₅H₄)FeCp] (Cp=⁵-C₅H₅), Ph₂P(CH₂)₂CN] with CdCl₂·2.5H₂O, ZnX ₂ (X=Cl, I) or InCl₃ afforded Fe-Cd-Fe or Fe-M(-X)₂ M-Fe (M=Cd, Zn, In;X=Cl, I) and Fe-InCl₂ complexes. Some of them contain an unusual and labile -²-SiO alkoxysilyl bridge which may be associated with a bridging mode for the ketophosphine ligand (first such example structurally established), thus providing original results in bimetallic chemistry on the intramolecular coordination of oxygendonor functions ofchemically different hemilabile ligands firmly attached to a neighboring metal center. The structures of the trinuclear complex (3), of the chlorobenzene solvate of the tetranuclear complex (4a·C₆H₅Cl) and of [mer-(OC)₃{(EtO)₃Si} (4e) have been determined by X-ray diffraction. Crystals of 3 are orthorhombic, space groupPbcn, witha=19.010(4),b=11.766(5),c=26.998(7)Å, andZ=4. Crystals of4a·C₆H₅Cl are monoclinic, space groupC2/c witha=22.455(3),b=17.680(2),c=16.627(4)Å, =90.80(4)°, andZ=4. Crystals of4e are monoclinic, space groupC2/c witha=25.392(5),b=18.554(6),c=16.28(1)Å, =120.73(3)°, andZ=4. The structures were solved using direct methods and Fourier difference techniques and refined by blocked full-matrix least squares toR=0.035 (R _w =0.049) for 2719 observed reflections, toR=0.042 (R _w =0.056) for 3082 observed reflections, and toR=0.057 (R _w =0.075) for 1850 observed reflections for3, 4a·C₆H₅Cl and4e, respectively. The Fe-Zn complexes (9a), (9b) and (9c) were prepared and characterized by spectroscopic methods.Part 21 in the Series: Complexes with Functional Phosphines. Part 20: P. Braunstein, S. Coco Cea, A. DeCian, and J. Fischer (1992).Inorg. Chem. 31, 4203.     

Dehydrogenation of methanol on low Cu and Re—Cu catalysts supported on sibunite

The activity and selectivity of mono- and bimetallic catalysts containing copper and rhenium on sibunite were studied in the decomposition of methanol to methyl formate (MF), water, H₂, CO, and CO₂at 200—400 °C. Methane is also formed on rhenium-containing catalysts at 300—400 °C. The dehydrogenating activity and selectivity to form MF are higher on the copper-sibunite catalysts than on the rhenium-sibunite samples. The introduction of 0.25% Re into the 4% copper-containing catalyst enhances its total activity and stability.     

纳米多孔双金属氧化物在镍钛合金纤维上的原位生长及其对多环芳烃的选择性固相微萃取

采用阳极氧化法在镍钛合金(NiTi)纤维上原位生长了双金属氧化物纳米孔(NiTiONPs)涂层,通过扫描电镜(SEM)和能谱(EDS)考察了电解质组成和电压对形貌的影响。将NiTiONPs涂层的NiTi纤维与高效液相色谱-紫外检测器联用,研究了4种典型芳香分析物的萃取性能。结果表明,富含TiO2的NiTiONPs涂层对多环芳烃(PAHs)具有良好的萃取效率,尤其对苯并[a]芘的萃取选择性优于市售聚二甲基硅氧烷纤维和聚丙烯酸酯纤维。在优化条件下,PAHs的线性范围为0.05~200μg/L,相关系数均大于0.999,检出限为0.012~0.134μg/L。对单支纤维日内和日间分析的相对标准偏差(RSDs)分别为4.0%~5.5%和6.0%~6.8%,使用分批组装的5支纤维分析的RSDs为6.4%~7.6%。实际水样分析的加标回收率为84.5%~111.5%。所制备NiTi纤维至少可重复使用250次以上,重现性好。     

包覆型纳米铜-银双金属粉研究

目前,导电胶或者电磁波屏蔽涂料用的导电性填料主要有三类,一是铜粉,二是银粉,三是铜-银双金属粉。铜粉具有来源广、价格低廉、导电性好等优点,但其抗氧化性能弱;银粉导电性与抗氧化性好,但其资源日益匮乏。大量的研究试图通过对铜粉进行表面改性来提高其性能。表面改性有两种方法,一是包膜处理,用SiO2溶胶处理铜粉,铜粉抗氧化性能提高,但其表面导电性能大大降低犤1犦;另一类方法是在铜粉表面覆盖一层导电性能与抗氧化性能均佳的银或金而制成双金属粉末犤2～5犦。制取高性能的铜-银双金属粉是该领域的研究重点。目前获得铜-银双金属粉的方…     

Study of Structures and Electronic Properties of Pdn–1Pb and Pdn （n≤8） Clusters

Geometric and electronic properties of Pdn–1Pb and Pdn (n≤8) clusters have been studied by using density functional theory with effective core potentials, focusing on the differences between mono- and bimetallic clusters. The average bond length of Pdn–1Pb (n≤8) bimetallic clusters is longer than that of pure palladium clusters except for n = 2 and 3. The most stable structure of Pdn–1Pb (n≤7) is the singlet where there is at least a Pd or Pb atom on its excited state. The energy gaps of Pd–Pb binary clusters are narrower than those of Pdn clusters, and then the chemical activity is strengthened when Pdn clusters are doped with Pb.     

Selective synthesis and characterization of single-crystal silver molybdate/tungstate nanowires by a hydrothermal process

Selective synthesis of uniform single crystalline silver molybdate/tungstate nanorods/nanowires in large scale can be easily realized by a facile hydrothermal recrystallization technique. The synthesis is strongly dependent on the pH conditions, temperature, and reaction time. The phase transformation was examined in details. Pure Ag(2)MoO(4) and Ag(6)Mo(10)O(33) can be easily obtained under neutral condition and pH 2, respectively, whereas other mixed phases of Mo(17)O(47), Ag(2)Mo(2)O(7,) Ag(6)Mo(10)O(33) were observed under different pH conditions. Ag(6)Mo(10)O(33) nanowires with uniform diameter 50-60 nm and length up to several hundred micrometers were synthesized in large scale for the first time at 140 degrees C. The melting point of Ag(6)Mo(10)O(33) nanowires were found to be about 238 degrees C. Similarly, Ag(2)WO(4), and Ag(2)W(2)O(7) nanorods/nanowires can be selectively synthesized by controlling pH value. The results demonstrated that this route could be a potential mild way to selectively synthesize various molybdate nanowires with various phases in large scale.