DFT mechanistic study of the H2‐assisted chain transfer copolymerization of propylene and p‐methylstyrene catalyzed by zirconocene complex

DFT computations have been performed to investigate the mechanism of H₂‐assisted chain transfer strategy to functionalize polypropylene via Zr‐catalyzed copolymerization of propylene and p‐methylstyrene (pMS). The study unveils the following: (i) propylene prefers 1,2‐insertion over 2,1‐insertion both kinetically and thermodynamically, explaining the observed 1,2‐insertion regioselectivity for propylene insertion. (ii) The 2,1‐inserion of pMS is kinetically less favorable but thermodynamically more favorable than 1,2‐insertion. The observation of 2,1‐insertion pMS at the end of polymer chain is due to thermodynamic control and that the barrier difference between the two insertion modes become smaller as the chain length becomes longer. (iii) The pMS insertion results in much higher barriers for subsequent either propylene or pMS insertion, which causes deactivation of the catalytic system. (iv) Small H₂ can react with the deactivated [Zr]?pMS?PP_n facilely, which displace functionalized pMS?PP_n chain and regenerate [Zr]? H active catalyst to continue copolymerization. The effects of counterions are also discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 576–585     

Radiotracer studies of the antitumor metallocene molybdocene dichloride with biomolecules

Neutron irradiation of Cp₂MoCl₂ for 24 h afforded the radiotracer Cp₂⁹⁹MoCl₂ which was characterised by UV–Vis spectroscopy and thin layer chromatography. Binding experiments with the thiol containing protein human serum albumin (HSA) or calf thymus DNA, were monitored for ⁹⁹Mo using a gamma counter. Under the conditions investigated, molar ratios of binding of 0.2:1 (Cp₂MoCl₂:DNA) and 9.4:1 (Cp₂MoCl₂:HSA) were calculated. The results are consistent with in vitro coordination studies that have shown strong preferential interaction of Cp₂MoCl₂ with thiols versus other donor sites in biomolecules including DNA.     

Functionalization of polyethylene/silane copolymers in posttreatment reactions

7‐Octenyldimethylphenylsilane was copolymerized with ethylene via Et(Ind)₂ZrCl₂ methylaluminoxane catalyst system without loss of catalyst activity or decrease in molar mass. The comonomer contents in the polymer samples were at a level of 0.15–1.0 mol % and the reactive phenylsilane groups were posttreated to different alcoxy‐ and halosilane groups, for example, Si? F, Si? Cl, Si? OCH₃, and Si? OCH₂CH₃. The posttreatment reactions had no major effect on the molar masses or on the thermal properties (measured with differential scanning calorimetry) of the copolymers. The reaction pathways were nearly independent of the comonomer contents and the reactions reached 70–100% conversions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1461–1467, 2004     

Olefin terpolymerizations. II. 4-vinylcyclohexene and cyclooctadiene

4-Vinylcyclohexene (VCH) and cyclooctadiene (COD) were investigated as termonomers in EPDM (ethylene/propylene/diene) synthesis by using rac-ethylenebis (1-η⁵-indenyl) zir-conium dichloride ( 1 ) as a catalyst precursor. Homopolymerizations of VCH, vinylcycloh-exane and cyclohexene were compared. The parameter K_πκ_p, which is the apparent rate constant for Ziegler-Natta polymerization, is about the same for VCH and vinylcyclohexanebut is 10 times smaller for cyclohexene. Therefore, the linear olefinic double bond is more active than the cyclic internal double bond. VCH reduces ethylene polymerization rate but not propylene polymerization rate in copolymerizations. In terpolymerizations, VCH tends to suppress ethylene incorporation especially at elevated polymerization temperature and Lowers the polymer MW by about two-fold. COD has very low activity as a termonomer. © 1995 John Wiley & Sons, Inc.     

Ethylene/1‐hexene copolymerization with tetramethyldisiloxane‐bridged bis(indenyl) metallocenes

Ethylene/1‐hexene copolymerizations with disiloxane‐bridged metallocenes, rac‐ and meso‐1,1,3,3‐tetramethyldisiloxanediyl‐bis(1‐indenyl)zirconium dichloride (rac‐ 1 , meso‐ 1 ) activated by modified methylaluminoxane were performed to investigate the influence of conformational dynamics on comonomer selectivity. Although ¹H NOESY (nuclear Overhauser and exchange spectroscopy) analysis indicated that the most stable conformation for the meso isomer in solution was that in which both indenes project over the metal coordination site, this isomer showed higher 1‐hexene selectivity in copolymerization (r_e = 140 ± 30, r_h = 0.024 ± 0.004) than the rac isomer with only one indene over the coordination site (r_e = 240 ± 20, r_h = 0.005 ± 0.001). The meso isomer showed high 1‐hexene selectivity, a high product of reactivity ratios (r_er_h = 3.3 ± 0.5) and produced copolymers that could be separated into fractions with different ethylene content suggesting that the active species exhibited multisite behavior and populated conformations with different comonomer selectivities during the copolymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3323–3331, 2004     

Metallocene copolymers of propene and 1‐hexene: The influence of the comonomer content and thermal history on the structure and mechanical properties

The relationships between the structure and properties have been established for copolymers of propylene and 1‐hexene synthesized with an isotactic metallocene catalyst system. The most important factor affecting the structure and properties of these copolymers is the comonomer content. The thermal treatment, that is, the rate of cooling from the melt, is also important. These factors affect the thermal properties, the degree of crystallinity, and therefore the structural parameters and the viscoelastic behavior. A slow cooling from the melt favors the formation of the γ phase instead of the α modification. Regarding the viscoelastic behavior, the β relaxation, associated with the glass‐transition temperature, is shifted to lower temperatures and its intensity is increased as the 1‐hexene content raises. The microhardness values are correlated with those of the storage modulus deduced from dynamic mechanical thermal analysis curves, and good linear relations have been obtained between these parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1253–1267, 2006     

三氟化硼修饰载体负载茂金属催化乙烯聚合

用BF3对载体硅胶和氧化铝进行了表面修饰,考察了修饰的载体负载茂金属催化剂后催化乙烯聚合的特性.研究表明,用BF3修饰过的载体负载二氯二茂锆催化乙烯的聚合,聚合活性有较大提高,具有工业应用前景,并且提出了这一催化体系的负载机理.     

Spectral studies of bridged bisindenylmetallocenes and products of their reactions with polymethylalumoxane in toluene and dichloromethane in the visible region

Quantitative characteristics of changes in the energy of charge transfer from -bonded ligands to metal are presented for the series of structurally similar ansa-metallocene complexes of IVB Group elements. The changes are caused by the solvation effect, replacement of -bonded chlorine ligands by methyl groups and of bridging ethylene groups by dimethylsilylene moieties, introduction of the methyl substituent into position 2 and phenyl substituent into position 4 of the indenyl system, variation of the transition metal in metallocene, and formation of complexes with polymethylalumoxane (MAO) at different Al_MAO/Zr ratios. These effects are found to be additive.     

碳铂类似物的合成,表征及对大鼠W—256肉瘤的抑制作用

合成了十八种〔PtA_2X〕·yH_2O,其中A分别为NH_3、CH_3NH_2、1/2乙二胺和1/2(2,3-二甲基-2,3-丁二胺),X分别为1,1-环丙烷二羧酸根(CPrDCA)、2-甲-1,1-环丙烷二羧酸根(2-M-CPrDCA)、2-甲-1,1-环丁烷二羧酸根(2-M-CBDCA)、1,2-环戊烷二羧酸根(CPDCA)和1,1-环已烷二羧酸根(CHDCA),并进行了表征。测定了配合物抑制大鼠W-256肉瘤的活性,发现配合物〔Pt(NH_3)_2X〕系列按X不同有以下的活性次序:CPrDCA>2-M-CPrDCA>CPDCA>CBDCA(碳铂)≥2-M-CBDCA。