Simple, expedient methods for the determination of water and electrolyte contents of cellulose solvent systems

The concentrations of water, W, and electrolytes present in solutions of LiCl in N,N-dimethylacetamide, LiCl/DMAc, and of tetrabutylammonium fluoride. x-hydrate in DMSO, TBAF.xW/DMSO can be accurately and expediently determined by three independent methods, UV–vis, FTIR and EMF measurement. The first relies on the use of solvatochromic probes whose spectra are sensitive to solution composition. It is applicable to W/LiCl/DMAc solutions but not to TBAF.xW/DMSO, because the charge-transfer complex bands of the probes are suppressed by strong interactions with the latter electrolyte. Integration of ν_OH band of water may be employed in order to determine [W], hence [electrolyte] by weight difference. EMF measurement uses ion-selective electrodes in order to determine [electrolyte], hence [W] by weight difference. Results of the latter method were in excellent agreement with those of FTIR. The reason for the failure of Karl Fischer titration is addressed, and the relevance of the results obtained to functionalization of cellulose under homogenous solution conditions is briefly commented on.     

甲基对硫磷的快速测定及电化学性质

研究了杀虫剂甲基对硫磷的电化学性质。在pH10．38的Bdtton—Robinson缓冲溶液中，采用微分脉冲溶出伏安法在悬汞电极上得到一个还原峰，峰电位为-0．5V(vs．Ag/AgCl)，本工作对实验条件进行了深入的研究，结合线性扫描伏安法等手段。研究了体系的电化学行为。实验表明，甲基对硫磷在汞电极上具有吸附性，电极反应具有不可逆性。该法用于水果及水样中甲基对硫磷残余量的测定，结果满意。     

Maintenance of Soft Calibration Models in the Determination of Zinc,Cadmium, Lead and Copper by Differential Pulse Anodic Stripping Voltammetry

A strategy for constructing a global multivariate calibration model that includes calibration samples measured over time on different days is developed and applied in electroanalysis. Both synthetic and real samples (tap, extracted and river water) are analyzed by differential‐pulse anodic stripping voltammetry, showing the suitability of the global model constructed that provides successful results similar to those of the usual multivariate calibration. In addition the capability of discrimination of this model is evaluated in prediction for the mean of three replicates with estimation of probability of false noncompliance, α, and false compliance, β, being found 3.1, 11.2, 6.7 and 64.7 nM for nominal concentrations of zinc, cadmium, lead and copper of 96.0, 40.4, 37.3 and 328.0 nM respectively when α=β=0.05. It has been proven that the use of the global calibration does not imply a loss of multivariate analytical sensitivity, using this parameter as quality index of the analytical procedure. The viability of using calibration maintenance strategies with electroanalytical techniques is shown, providing a way to save time and experimental effort when these techniques are used in routine analysis.     

The Isoelectric Point and the Points of Zero Charge of Fe-Al-Mg Hydrotalcite-like Compounds

The relation of the isoelectric point (IEP) and the point of zero net charge (PZNC) of the hydrotalcite-like compounds was discussed. It was found that the IEP does not equal to the PZNC and the IEP is higher than the PZNC. The structural positive charges existing in the HTlc,which cause the difference between the IEP and the PZNC. The effects of the structural positive charges of the HTlc on its IEP and PZNC are the same as the specific adsorption of metal cations.     

镍-酸性铬兰K络合物吸附波

用微分脉冲溶出伏安法研究了镍(11)与酸性铬兰K(ACBK)所生成的络合物在悬汞电极上的电化学特性及电化学反应机理，发现电极反应为镍与酸性铬兰K所生成的络合物吸附在电极表面后发生的不可逆还原。在HCl-硼砂介质中(pH8．67)，络合物在-316mV处有一吸附还原峰，其峰电流与镍浓度在0．001～0．010μ/mL范围内呈现良好的线性关系，其最低检出浓度为0．0005μg／mL。     

吸附溶出伏安法测定毗喳酮的研究

本文报道了用吸附溶出伏安法测定毗喳酮.以悬汞电极为工作电极，在Na}B,O,-NaOH介质(pH=10)中，毗喳酮产生一尖锐的吸附还原峰,E，二一1. 29V (vs. SCE )，峰电流与毗喳酮浓度在2. 0 X 10-'-8. 0 X 10-smol " L-’范围内呈良好的线性关系.检测限为2. 0 X 10-0mol " L-'(富集90s).本文对毗喳酮在悬汞电极上的电化学行为进行了探讨，对测定毗喳酮的最佳条件进行了详细的选择，利用本法测定了片剂中毗喳酮含量，结果满意.     

一种性能良好的高锰酸根离子选择电极

在异源四倍体棉种中现已鉴定出２２个芽黄突变体、２６个芽黄基因，其中Ｖ１与Ｖ７、Ｖ２之间存在着部分同源关系。重叠牙黄基因Ｖ１６Ｖ１７的遗传主式独特，单体１测验的分离世代Ｆ２和ＢＣ恢复产生了黄化的单体株。鉴于杂中子生产现状，俄系统阐述了以芽黄作为指示性进行棉花杂种优势利用的可行性。     

Electrochemical reduction of sodium metavanadate in an equimolar KCl-NaCl melt

Electrochemical reduction of sodium metavanadate in an equimolar KCl-NaCl melt and the effect of acid-base properties of environment on this process are studied by a voltammetry method on a stationary platinum electrode. It is established that the limiting current of the NaVO₃ electroreduction process has a kinetic nature. The process proceeds via an autoinhibition scheme and its rate is limited by an acid-base reaction conjugated with an irreversible charge transfer reaction. A substantial role of cationic composition of the melt is revealed experimentally. Following acidification of the KCl-NaCl-NaVO₃ melt by Mg²⁺ (from MgCl₂), the process passes from an irreversible kinetic regime into a reversible diffusion (quasi-diffusion) process. Values of stability constants for vanadates produced with the aid of acid-base titration of vanadium pentoxide by oxygen ions in experimental conditions are presented. These values are taken into account when calculating kinetic parameters of the NaVO₃ electroreduction.     

A high sensitivity titration calorimeter using pyroelectric sensor

A new sensitive isothermal titration microcalorimeter using polyvinylidene difluoride (PVDF) as detector has been developed. Heat pulses of less than 0.4 μJ can be detected and the baseline noise level (p-p) is 40 nW. The calorimeter is constructed with one reaction cell (0.7 ml) insulated by several radiation shields inside a vacuum chamber. The performance of the instrument was examined by measuring the heat of protonation of Tris with HCl. The enthalpy of reaction was found to be ?49±1 kJ·mol^?1, in good agreement with the reported value of ?47.5 kJ·mol^?1.