Electrochemical Biosensors Based on Enzymatic Reactor of Silver Solid Amalgam Powder for Measurements in Flow Systems

An enzymatic reactor based on silver solid amalgam powder was suggested as the main part of biosensors in flow systems for the first time. Biosensors were tested with following enzymes: ascorbate oxidase, glucose oxidase, catalase, tyrosinase and laccase. The current response of each biosensor was optimized with respect to the detection potential, flow rate, the injection and reactor volume. Relative standard deviation for detection with the studied enzymes was found to be in the range of 0.81–2.1 %. The biosensor with the ascorbate oxidase reactor was used for determination of ascorbic acid in the vitamin tablets Celaskon.     

Cs2Hg27, das quecksilberreichste Amalgam – ein naher Verwandter der Bergman‐Phasen

Cs₂Hg₂₇, the Mercury‐richest Amalgam with Close Relationship to the Bergman Phases By electrolyzing a solution of cesium iodide in N,N‐dimethylformamide at 2 °C on a mercury cathode the amalgam Cs₂Hg₂₇ can be synthesized. It crystallizes in an own cubic structure type (space group , a = 16.557(4) Å). The structure can be rationalized by a system of concentrical polyhedral spheres, in close analogy to the Bergman phases.     

Renewable Copper and Silver Amalgam Film Electrodes of Prolonged Application for the Determination of Elemental Sulfur Using Stripping Voltammetry

New, renewable copper (Hg(Cu)FE) and silver (Hg(Ag)FE) based amalgam film electrodes applied for the determination of elemental sulfur using differential pulse cathodic stripping voltammetry are presented. With surface areas adjustable from 1 to 12 mm², both electrodes are characterized by very good surface reproducibility (≤2%) and long‐term stability (a few thousand measurement cycles). The mechanical refreshing of the amalgam film takes about 1–2 seconds. The effects of various factors such as instrumental parameters and the supporting electrolyte composition were optimized. Interferences from sulfides are easily removed by the addition of acid, and bubbling with argon, for Hg(Ag)FE. In the case of Hg(Cu)FE, sulfides did not interfere. The calibration graph is linear within the studied range from 16 ng L^?1 to 4.8 μg L^?1 for Hg(Cu)FE, and up to 6.4 μg L^?1 for Hg(Ag)FE (t_acc=15 s). The correlation coefficients for the two electrodes were at least 0.997. The detection limits for a low concentration of S(0) and t_acc=60 s are as low as 14 ng L^?1 for Hg(Cu)FE and 4 ng L^?1 for Hg(Ag)FE. The proposed method was successfully applied and validated by studying the recovery of S(0) from spiked river water.     

Rb5Hg19: Eine neue,geordnete Defektvariante des BaAl4‐Strukturtyps

Rb₅Hg₁₉: A New Defect Variant of the BaAl₄ Structure Type The hitherto unknown, silver metallic, air sensitive Rb₅Hg₁₉ can be prepared directly from the elements. It crystallizes tetragonally with lattice constants a = 1156.1 pm, c = 1051.0 pm (Z = 2, space group I4/m, No. 87, melting temperature 467 K) in a new defect variant of the BaAl₄ structure type. The structure is based on distorted 4⁴ nets of Hg₄ rectangles and squares forming rectangular and square pyramids together with additional Hg atoms. The vertices of the pyramids point in alternate directions with respect to [001]. Opposite vertices show relatively short contacts d_Hg–Hg = 292.3 pm along [001]. The defect character of the Rb₅Hg₁₉ structure shows up by single Hg atoms substituting each fifth Hg–Hg group in an ordered way and serving as common vertices for two subsequent square pyramids along [001]. The replacement of Hg–Hg groups by single Hg atoms explains the vertical and horizontal distortions of the 4⁴ nets and explains the differences of the Rb coordination with respect to Ba (bicapped tetragonal hexagonprism) in the BaAl₄ type, in which a hypothetical RbHg₄ could eventually crystallize. The symmetry relations of Rb₅Hg₁₉ and α‐La₃Al₁₁ (the only defect variant of BaAl₄ except Rb₅Hg₁₉) to the aristo type BaAl₄ are discussed.     

Determination of Selenium Traces on Cyclic Renewable Mercury Film Silver Electrode in Presence of Copper Ions Using Cathodic Stripping Voltammetry

The new cyclic renewable mercury film silver based electrode (Hg(Ag)FE), applied for the determination of selenium(IV) traces in the presence of copper ions using differential pulse cathodic stripping voltammetry (DP CSV) is presented. The preparation of the Hg(Ag)FE is very simple. The effects of various factors such as: preconcentration potential and time, pulse height, step potential and supporting electrolyte composition are optimized. The calibration graph is linear from 0.5 nM (39 ng L^?1) to 100 nM (7.9 μg L^?1) for a preconcentration time of 45 s, with correlation coefficient of 0.9995. For a Hg(Ag)FE with a surface area of 8 mm² the detection limit for a preconcentration time of 90 s is as low as 17 ng L^?1. The repeatability of the method at a concentration level of the analyte as low as 2 μg L^?1, expressed as RSD is 2.7% (n=7). The proposed method was successfully applied and validated by studying the certified reference material (bovine liver BCR‐185) and simultaneously recovery of Se(IV) from spiked water samples.     

The Cyclic Renewable Mercury Film Silver Based Electrode for Determination of Uranium(VI) Traces Using Adsorptive Stripping Voltammetry

The new cyclic renewable mercury film silver based electrode (Hg(Ag)FE), applied for the determination of uranium(VI) traces using differential pulse adsorptive cathodic stripping voltammetry (DP AdCSV) is presented. The Hg(Ag)FE electrode with a surface area adjustable from 1.1 to 12 mm² is characterized by very good surface reproducibility (≤2%) and long‐term stability (more than 2 thousand measurement cycles). The mechanical refreshing of mercury film is realized in the simple constructed device, in a time shorter than 1–2 seconds. The effects of various factors such as: preconcentration potential and time, pulse height, step potential and supporting electrolyte composition are optimized. The calibration graph is linear from 0.4 nM (95 ng L^?1) to 250 nM (60 μg L^?1) for an accumulation time of t_acc=20 s, with correlation coefficient of 0.9996. For a Hg(Ag)FE with a surface area of 2.7 mm² the detection limit for an accumulation time of 120 s is as low as 12 ng L^?1. The repeatability of the method at a concentration level of the analyte as low as 2.4 μg L^?1, expressed as RSD is 2.5% (n=7). The proposed method was successfully applied and validated by studying the recovery of U(VI) from spiked river water and sediment samples.     

Amalgam Electrodes for Electroanalysis

Liquid mercury is a unique material for the indicator electrode in voltammetry. One reason for this is the high overvoltage for hydrogen formation, thus extending the actual potential window. Diluted amalgams are important reaction products in voltammetric (polarographic) processes, however liquid amalgams are rarely used directly as electrode material for analytical purposes. Because of the fact that voltammetry is very suitable for field and remote monitoring, issues concerning the use of mercury electrodes in environmental analyses have led to considerable research effort aimed at finding alternative tools with acceptable performance. Solid electrodes are such alternatives. Different types of electrodes are reviewed. In particular, solid amalgam electrodes are very promising, with acceptable low toxicity to be used for field measurements. Solid amalgam electrodes are easy and cheap to construct and are stable over a reasonable time up to several weeks. Assessment of the toxicity risk and the long time stability for remote and unattended monitoring is discussed. The differences between solid dental amalgam electrodes, made by using techniques known from dental clinical practice, and mercury film or mercury layer electrodes on solid substrates are reviewed. In particular the dental technique for constructing solid amalgam electrodes gives advantage because it's fast and inexpensive. Also the technique for making dental amalgam has been explored and optimized over years by dentists, giving advantage when the same technique is used for constructing electrodes. Dental amalgam electrodes has been found to act similar to a silver electrodes, but with high overvoltage towards hydrogen. This make it possible to use the dental amalgam electrode for detection of zinc, cobalt and nickel in additions to other metals like lead, copper, thallium, cadmium, bismuth, iron etc. Also the use for reducible organic compounds is expected to be promising.     

关于某些多边形积的剩余有限性

讨论嵌入子群是循环群的有限p-群的多边形积,得到了多边形积为剩余有限的一个充分条件.