Determination of atranol and chloroatranol in perfumes using simultaneous derivatization and dispersive liquid–liquid microextraction followed by gas chromatography–mass spectrometry

A new analytical method based on simultaneous derivatization and dispersive liquid–liquid microextraction (DLLME) followed by gas chromatography–mass spectrometry (GC–MS), for the determination of the allergenic compounds atranol and chloroatranol in perfumes, is presented. Derivatization of the target analytes by means of acetylation with anhydride acetic in carbonate buffer was carried out. Thereby volatility and detectability were increased for improved GC–MS sensitivity. In addition, extractability by DLLME was also enhanced due to a less polar character of the solutes. A liquid–liquid extraction was performed before DLLME to clean up the sample and to obtain an aqueous sample solution, free of the low polar matrix from the essential oils, as donor phase. Different parameters, such as the nature and volume of both the extraction and disperser solvents, the ionic strength of the aqueous donor phase or the effect of the derivatization reagent volume, were optimized. Under the selected conditions (injection of a mixture of 750 μL of acetone as disperser solvent, 100 μL of chloroform as extraction solvent and 100 μL of anhydride acetic as derivatization reagent) the figures of merit of the proposed method were evaluated. Limits of detection in the low ng mL⁻¹ range were obtained. Matrix effect was observed in real perfume samples and thus, standard addition calibration is recommended.     

Quantitative analysis by comprehensive two-dimensional gas chromatography using interval Multi-way Partial Least Squares calibration

A new approach for target quantitative analysis for comprehensive two-dimensional gas chromatography (GC × GC), interval Multi-way Partial Least Square (iNPLS) is presented and evaluated in this paper. In iNPLS, the two-dimensional chromatogram is split in small sections; each of these pieces is treated as an independent new chromatogram. Separated conventional NPLS calibration models for the concentration of the target analyte are built for each of the pieces of the whole chromatogram, and the best model is selected for quantitative analysis. An algorithm for iNPLS running on MatLab platform was written, preliminarily evaluated with using solutions of model compounds with different chemical properties and subsequently applied to quantify some allergens in perfume samples. The results were found to be adequate, and good precision and accuracy was obtained even for poorly resolved peaks.     

Proteomics of cypress pollen allergens using double and triple one-dimensional electrophoresis

Italian cypress (Cupressus sempervirens, Cups) pollen causes allergic diseases in inhabitants of many of the cities surrounding the Mediterranean basin. However, allergens of Cups pollen are still poorly known. We introduce here a novel proteomic approach based on double one‐dimensional gel electrophoresis (D1‐DE) as an alternative to the 2‐DE immunoblot, for the specific IgE screening of allergenic proteins from pollen extracts. The sequential one‐dimensional combination of IEF and SDS‐PAGE associated with IgE immunoblotting allows a versatile multiplexed immunochemical analysis of selected groups of allergens by converting a single protein spot into an extended protein band. Moreover, the method appears to be valuable for MS/MS identification, without protein purification, of a new Cups pollen allergen at 43 kDa. D1‐DE immunoblotting revealed that the prevalence of IgE sensitization to this allergen belonging to the polygalacturonase (PG) family was 70% in tested French allergic patients. In subsequent triple one‐dimensional gel electrophoresis, the Cups pollen PG was shown to promote lectin‐based protein‐protein interactions. Therefore, D1‐DE could be used in routine work as a convenient alternative to 2‐DE immunoblotting for the simultaneous screening of allergenic components under identical experimental conditions, thereby saving considerable amounts of sera and allergen extracts.     

Solid-phase microextraction gas chromatography-mass spectrometry determination of fragrance allergens in baby bathwater

A method based on solid-phase microextraction (SPME) and gas chromatography-mass spectrometry (GC-MS) has been optimized for the determination of fragrance allergens in water samples. This is the first study devoted to this family of cosmetic ingredients performed by SPME. The influence of parameters such as fibre coating, extraction and desorption temperatures, salting-out effect and sampling mode on the extraction efficiency has been studied by means of a mixed-level factorial design, which allowed the study of the main effects as well as two-factor interactions. Excluding desorption temperature, the other parameters were, in general, very important for the achievement of high response. The final procedure was based on headspace sampling at 100 °C, using polydimethylsiloxane/divinylbenzene fibres. The method showed good linearity and precision for all compounds, with detection limits ranging from 0.001 to 0.3 ng mL⁻¹. Reliability was demonstrated through the evaluation of the recoveries in different real water samples, including baby bathwater and swimming pool water. The absence of matrix effects allowed the use of external standard calibration to quantify the target compounds in the samples. The proposed procedure was applied to the determination of allergens in several real samples. All the target compounds were found in the samples, and, in some cases, at quite high concentrations. The presence and the levels of these chemicals in baby bathwater should be a matter of concern. Baby exposure to fragrance allergens and other cosmetic ingredients through the daily bath     

Identification of avocado (Persea americana) pulp proteins by nano‐LC‐MS/MS via combinatorial peptide ligand libraries

Avocado (Persea americana) proteins have been scarcely studied despite their importance, especially in food related allergies. The proteome of avocado pulp was explored in depth by extracting proteins with capture by combinatorial peptide ligand libraries at pH 7.4 and under conditions mimicking reverse‐phase capture at pH 2.2. The total number of unique gene products identified amounts to 1012 proteins, of which 174 are in common with the control, untreated sample, 190 are present only in the control and 648 represent the new species detected via combinatorial peptide ligand libraries of all combined eluates and likely represent low‐abundance proteins. Among the 1012 proteins, it was possible to identify the already known avocado allergen Pers a 1 and different proteins susceptible to be allergens such as a profilin, a polygalacturonase, a thaumatin‐like protein, a glucanase, and an isoflavone reductase like protein.     

Octyl‐modified magnetic graphene as a sorbent for the extraction and simultaneous determination of fragrance allergens,musks, and phthalates in aqueous samples by gas chromatography with mass spectrometry

An effective, simple, and low‐cost sample preparation method based on dispersive SPE followed by GC with MS is developed for the multianalyte determination of fragrance allergens, musks, and phthalates, at sub‐ppb levels. The extraction procedure is based on a novel magnetic graphene sorbent, which is functionalized with octylamine, taking advantage of the functionalization's hydrophobic properties and π–π interactions with the analytes. Two alkyl amines, the octylamine and octadecylamine are studied to introduce alkyl chains in the basal plane of graphene. Magnetic graphene‐ octadecylamine is proved to be highly hydrophobic to such a degree that is hard to disperse in the bulk aqueous matrixes. Because of this behavior, its extraction efficiency for the target analytes is low. The synthesis and applicability of the magnetic graphene‐octylamine as more favored sorbent are optimized in terms of the most determining experimental conditions. The detection and quantification limits, which are calculated based on S/N ratio of 3 and 10, respectively, ranged from 0.29 to 3.2 ng L^?1 and from 0.89 to 9.6, respectively. The dispersive SPE is successfully applied to routine analysis for the determination of the target analytes in samples from municipal treatment plant of Ioannina (Greece), from Pamvotis Lake and baby bathwater. The reproducibility of the spiked biological treatment plant water sample is evaluated and the relative standard deviation values range between 2.1 and 9.4%.     

Determination of suspected allergens in non-volatile matrices using PTV injection with automated liner exchange and GC-MS

A method is described for the analysis of suspected volatile allergens in products containing high molecular weight or non-volatile compounds such as plant extracts, solid and liquid detergents, shampoos, etc. The method is based on dissolution/extraction of the sample followed by direct injection in a programmed temperature vaporizing inlet, the liner of which contains PDMS foam to retain the high molecular weight non-volatile material. The liner is automatically replaced after each injection, by an automated liner exchange device. Analysis is done by GC-MS operated in the retention-time locked mode. The figures of merit are illustrated with the analysis of some real samples.     

Multicomponent analytical methodology to control phthalates, synthetic musks, fragrance allergens and preservatives in perfumes

A simple, fast, robust and reliable multicomponent analytical method applicable in control laboratories with a high throughput level has been developed to analyze commercial brands of perfumes. Contents of 52 cosmetic ingredients belonging to different chemical families can be determined in a single run. Instrumental linearity, precision of the method and recovery studies in real samples showed excellent results, so that quantification by external calibration can be effectively applied. Relevant limits of detection and quantification were obtained for all the targets considered, far below the legal requirements and amply adequate for its accurate analytical control.A survey of 70 commercial perfumes and colognes has been performed, in order to verify whether these products complied with the recent changes in European legislation: regarding the maxima allowed concentrations of the ingredients and/or ingredient labelling. All samples contained some of the target ingredients. Several samples do not comply with the regulations concerning the presence of phthalates. Musks data confirmed the trend about the replacement of nitromusks by polycyclic musks; as well as the noticeable introduction of macrocyclic musks in the perfumes composition. The prohibited musk moskene has been detected in one sample in an appreciable concentration. The average number of fragrance allergens is twelve per sample; their presence must be indicated in the list of ingredients when its concentration exceeds the 0.001%, but values higher than 1% have been found in some samples. Preservatives data show that parabens, although ubiquitous in other cosmetic products, are not widely used in perfumery. In contrast, the presence of BHT is indeed widespread. The degree of compliance with the European Regulation on the labelling has been evaluated in a subset of samples, and only about the 38% of the perfumes were properly labelled for the allergens tested.     

Proficiency testing for quality assurance of allergens methods

Proficiency testing is an external quality control check, whereby the quality of an analytical result is checked against criteria that are set independently of the laboratory carrying out the analysis. Participants in a proficiency test are encouraged to use the method of their choice to determine the analyte in question. The collated results submitted by the participants are used to derive the best estimate of the ‘true’ level, or assigned value, of the analyte, as a consensus value of the whole data set. Generally, the data submitted will be normally distributed and from a single population, but if a data set is found to be multimodal, then the selection of one of the modes as the assigned value is possible where there is supporting data, typically methodology information. Unless there are independent grounds for preferring one mode over another, it is not possible to set an assigned value or calculate z-scores. However, the analysis of allergens has presented proficiency testers with a new challenge, since it has become apparent that quantitative results may be dependent on the brand of enzyme-linked immunosorbent assay kit used, the specific analyte targeted (e.g. total content or allergen protein content) and the limit of detection achievable. FAPAS® has run more than 40 proficiency tests for allergen analysis over the past 7 years, during which time methods have been developed and improved and the requirements for determination of food ingredient allergens has increased. Two case studies are presented which highlight some of the issues around the use of allergen measurement methods.

Open image in new window

Figure A selection of food items which might cause allergenic or intolerance reactions

     

Fast gas chromatography-full scan quadrupole mass spectrometry for the determination of allergens in fragrances

The Scientific Committee for Cosmetics and NonFood Products in the 7th Amendment to the European Cosmetics Directive established 26 fragrance components, widely used in cosmetic products, as being responsible for a series of contact allergies (Directive 2003/15/EC, Official Journal of the European Union, L66/26, 11.3.2003). The regulation foresees that any allergen, present in excess of 100 mg/kg in rinse-off and of 10 mg/kg in leave-on formulations, must be reported on the label of the product. The present research reports a fast GC-full scan quadrupole mass spectrometric method (under 5 min) for the qualitative/quantitative analysis of allergens in perfumes. Reliable peak identification was achieved through a twin-filtered MS library matching procedure, considering a minimum degree of spectral similarity (90%) and retention data (a linear retention index window was applied). Peak quantification was carried out by using a specific extracted ion. In case a suspected allergen fell within its retention time window but presented a low degree of spectral purity (< 90%), analyte determination was achieved by using three extracted ions (one quantifier and two qualifiers). The fast GC-MS method was validated in terms of intraday retention time and peak area precision, LODs and LOQs, and method linearity. Finally, peak skewing was also evaluated and was within more than acceptable limits.