Über die Magnetischen Eigenschaften der Cobaltate Na6CoS4, Na6CoSe4 und K6CoS4

Magnetic Properties of the Cobaltates Na₆CoS₄, Na₆CoSe₄, and K₆CoS₄ The alkali metal cobalt chalcogenides Na₆CoS₄, Na₆CoSe₄, and K₆CoS₄ crystallize in the space group P6₃mc with Z = 4. The structure is characterized by isolated [CoX₄]-tetrahedra. The magnetic susceptibilities show Curie-Weiss behaviour. The deviations at low temperatures are caused by antiferromagnetic interactions. The magnetic moments are discussed with regard to ligand-field parameters.     

A New Family of Binary Layered Compounds of Platinum with Alkali Metals (A = K,Rb, Cs)

By reacting platinum with alkali metals (A = K, Rb, Cs) a new family of binary alkali metal platinides has been synthesized and characterized by chemical analysis, X‐ray powder diffraction, thermal analysis (DTA and DSC), and magnetic measurements. All three compounds exhibit similar XRD‐patterns with strong reflections that can be indexed on the basis of a rhombohedral crystal system (K_xPt: a = 2.6462(1), c = 17.123(1); Rb_xPt: a = 2.6415(1) Å, c = 17.871(1) Å; Cs_xPt: a = 2.6505(1) Å, c = 18.536(1) Å; x < ½. The a lattice constant is independent on the alkali metal used and of value close to the Pt–Pt distance in NaPt₂ (2.645Å). The c parameter increases monotonically with the growing atomic radius of the alkali metal. The average structure of the alloys consists of cubic close packed layers of platinum atoms with layers of disordered alkali metals in between. For all compounds besides the strong reflections small satellites are observed which cannot be indexed together with the rhombohedral peaks in any rational 3‐dimensional lattice. However, these satellites can be indexed as incommensurate modulations within the ab plane (found propagation vectors k = (0.1011, 0.2506, 0) for Cs_xPt, and k = (0.0168, 0.2785, 0) for Rb_xPt).     

Multifunctional Calix[4]arenes Containing Pendant Amide and Phosphoryl Groups: Their Use as Extracting Agents and Carriers for Alkali Cations

The complexing, extracting and mobile carrier properties of the tetra(phosphine oxide)-calix[4]arene 1 and the hybrid diamide-di(phosphine oxide)-calix[4]arene 2 were studied. Both ligands give 1 : 1 complexes with alkali cations in THF as shown by the picrate method. 1H NMR experiments were run to follow encapsulation of sodium and potassium cations. The corresponding spectra indicate C2-symmetrical structure. The observed extraction orders of the alkali picrates were as follows K+>Rb+>Li+>Cs+>Na+ for 1 and Li+>Na+>K+>Rb++ for 2. Transport kinetics was analysed by means of a model which assumes pure diffusion and which allows the evaluation of mass transfer coefficients in all systems. These coefficients and their influences on the transport rate are discussed in terms of size of the transporting species in the liquid membrane.     

Einkristalluntersuchungen an Fluoroperowskiten MPdF3 (M = Rb,K) und PdF2

Single Crystal Investigations on Fluoroperovskites MPdF₃ (M = Rb, K) and PdF₂ Single crystal investigations on PdF₂ (violet) confirm the tetragonale rutile structure [1, 2] with a = 495.44(3) pm, c = 338.48(3) pm, Z = 2, space group P4₂/mnm-D (No. 136) (x_F = 0.3058(8)). RbPdF₃ and KPdF₃ have been obtained. RbPdF₃ and KPdF₃ both ruby-red single crystals crystallize cubic (perovskite-structure), space group Pm3m-O (No. 221) with a = 429.41(8) pm (RbPdF₃) respectively a = 424.30(4) pm (KPdF₃).     

Structural Changes of Cellulose Crystallites Induced by Mercerisation in Different Solvent Systems; Determined by Powder X-ray Diffraction Method

The completeness of mercerisation can be evaluated by investigating the changes in the crystalline regions of cellulose from cellulose I (C-I) to cellulose II (C-II) by the X-ray powder diffraction method. Mercerisation experiments in four different solution systems: ethanol/water, acetone, DMSO and xylene, are reported. Also the effect of some additives, external pressure, treatment time and alkalisation temperature were studied. In two-phase solvent systems, structural changes of cellulose crystallites depended primarily on the distribution and solubility of sodium hydroxide in the solvent phases. The sodium hydroxide concentration in the hydrophilic phase must exceed 7–8 w/w-% before complete crystal change from C-I to C-II can occur. The precipitation of sodium hydroxide due to high concentration prevents the successful use of one-phase ethanol/water system in slurry process. On the contrary, the 2-propanol/water/sodium hydroxide system separates into two layers; to the water-rich lower layer and the 2-propanol-rich upper layer, where the sodium hydroxide remains mainly in the water-rich lower layer. This prevents the precipitation of sodium hydroxide and promotes the alkalisation of cellulose. Ammonium chloride and ammonium hydroxide clearly had a positive effect by promoting the crystal changes, however, the urea concentration used in this study was obviously too small. In the advantageous two-phase 2-propanol/water systems, the alkalisation time was only 15 min when the treatment temperature was kept between 0 and 10 °C. Reduced external pressure was found to have a small but still detectable positive effect on cellulose alkalisation while over-pressure prevented crystal changes.     

Dynamik linearer Molekülanionen in den Hydrogensulfiden von Natrium,Kalium und Rubidium: Differential-Scanning-Kalorimetrie,Röntgen- und Neutronenbeugung

Dynamical Behaviour of Linear Molecular Anions in the Hydrogensulfides of Sodium, Potassium and Rubidium: Differential Scanning Calorimetry, X-ray and Neutron Diffraction Hydrogensulfides of the alkali metals M ? Na, K, Rb were prepared in autoclaves by the reaction of the corresponding metals with H₂S and D₂S, respectively, in the temperature range from 50°C to 150°C. Differential scanning calorimetry, X-ray and neutron diffraction methods reveal that both, the HS^?-and DS^?-compounds occur in three crystalline modifications with HT ? high-, MT ? medium- and LT ? low-temperature form: The temperatures and enthalpies for the changes of modifications of the H- and D-compounds are given and the atomic arrangements revealed mainly by neutron diffraction data are discussed, in relation to, for example, size of cations.     

Modification of silica gel with diethylamino group by novel reaction and its characterization

1,3,5,7-Tetramethylcyclotetrasiloxane (H₄) was deposited on silica gel at 80°C by utilizing a chemical vapor deposition (CVD) method, where it was catalytically polymerized to form a surface coating of polymethylsiloxane (PMS). Treated silica gel (PMS-Si) increased in weight up to a plateau level, and there was no further increase with increasing reaction time. The film of PMS was partially cross linked; typical values of crosslinking ratio and film thickness were 2% and 0.6 nm, respectively. An anionic ion exchanger containing diethylamino groups was synthesized from PMS-Si by hydrosilylation of allyl glycidyl ether followed by treatment with diethylamine. Its structure was confirmed by¹³C and²⁹Si CP/MAS NMR spectroscopy and FT-IR spectrophotometry. Characterization of silica gel (DEA-Si) modified with diethylamino group was evaluated by a packing of the column for liquid chromatography. As a mixture of five nucleotides was completely separated, it was recognized that DEA-Si was operated by ion exchange action. Because the surface of the silica gel was covered with hydrophobic PMS, the peak heights and retention times did not change after washing of the column with alkaline solution.     

Ion chromatographic determination of alkali and alkaline earth metals in mineral waters

Summary The rapid, simultaneous, suppressed ion chromatographic determination of alkali, alkaline earth metals and ammonium in highly mineralized waters has been examined using the novel cation exchange IonPac CS12 column. General ability for the determination of lithium, sodium, ammounium, potassium, magnesium, calcium and strontium in concentrations from a few g to several mg per liter was studied. The relative standard deviations of retention times of all seven cations were below 0.7% and the relative standard deviations of the measurements of peak areas and peak heights were mostly below 5%. Six natural mineral waters of different types were selected for evaluation of the method. It was not possible to determine lithium in the one run and ammonium usually partially coelutes with sodium precluding quantitative determination. Strontium was undetectable because of the necessary dilutions. All the reltionships between peak areas and concentrations or peak height and concentrations were linear and there was also no evidence of the effect of different matrices on the slope of regression lines.     

Effect of 1,10-phenanthroline on the extraction and separation of lithium(I), sodium(I) and potassium(I) with thenoyltrifluoroacetone

The extraction of Li⁺ with thenoyltrifluoroacetone (Htta) in the presence of 1,10-phenanthroline (phen) has been studied in various organic solvents. The remarkable enhancement of the extraction of Li⁺, that is a synergistic effect, was observed by the addition of phen, and the high extractability of Li⁺ was attained in toluene, benzene, chlorobenzene and o-dichlorobenzene. The extraction equilibrium of Li⁺, Na⁺ and K⁺ (denoted as M⁺) in the presence or absence of phen in chlorobenzene and the adduct formation reaction in the organic phase were studied in detail. The adduct of Li⁺ was Li(tta)(phen) in the wide concentration range of phen in the organic phase, while in Na⁺ and K⁺ M(tta)(phen)₂ also exists in the high concentration region. The maximum value of the separation factor between Li⁺ and Na⁺ was observed in the present system and was larger than that in the Htta-trioctylphosphine oxide (TOPO)-benzene system reported previously.