Malononitrile-involved Michael addition polymerization: An efficient and facile route for cyano-rich polyesters with programmable thermal and mechanical properties

An efficient, atom-economic, oxygen-tolerant, and water-tolerant strategy has been established to synthesize cyano-rich polyesters. Four kinds of organic bases, 1,1,3,3-tetramethylguanidine (TMG), 4-dimethylaminopyridine, triethylamine, and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) were explored for accelerating Michael addition polymerization of malononitrile and 1,4-butandiol diacrylate. TMG can promote the polymerization efficiently under mild conditions to quantitatively afford polyester with high-molecular weight and moderate polydispersity. The comparison of the kinetic studies of TMG and TBD reveals that TMG shows better catalytic performance, while the catalysis of TBD brings about oligomers in spite of the higher efficiency at early age of the polymerization. Moreover, other diacrylate compounds could also be quantitatively polymerized to afford polyesters with high molecular weight. When dimethacrylate is chose as the monomer, the polymerization becomes sluggish. All the afforded polyesters display programmable thermal and mechanical properties that are closely related to their chemical structures.     

Effects of Moisture and Stresses on the Structure and Properties of Polyester Resin

The results of a complex study of structural changes in a cured Norpol 440 polyester resin under the action of damp environment and mechanical loading are presented. A considerable effect of absorbed moisture on the structure and some characteristics of the material is revealed by using thermophysical methods and X-ray diffractometry. The joint effect of moisture and mechanical stress is estimated by investigating the creep in stationary and nonstationary moisture conditions. The anisotropy of the material structure formed during creep is evaluated from the results of dilatometric measurements. It is found that the degree of anisotropy of the material after creep accompanied by moisture sorption is higher than that after creep in the conditions of moisture equilibrium with atmosphere. It is established that the aftercure and relaxation of the residual creep deformation come to an end at heating to 80-85°C. At a further rise in temperature and repeated heating, changes in the material structure are not observed.     

Synthesis of unsaturated polyester resins for large sized composites

A series of unsaturated polyesters based on phthalic anhydride (PHA), maleic anhydride (MA), ethylene glycol (EG), diethylene glycol (DG), triethylene glycol (TG), propylene glycol (PG), styrene (Sty) and acrylonitrile (AN) were prepared. The molecular weights of the prepared polyesters were determined by end-group analysis. The effect of the structure of the resin on its curing behavior has been investigated. On the basis of the experimental study, the following were concluded: (1) The maximum curing temperature (T_max) is related to the molecular weight of the glycol incorporated in these castings. In this context the T_max was found to decrease with increasing the molecular weight. Meanwhile the time to peak temperature t_max was increasing. (2) The higher the percentage of AN in the crosslinking monomer system, the slower a resin cures. (3) The values of T_max were found to be influenced to a large extent by the percentage of AN.     

The effect of crystallinity on chain mobility and free volume in the amorphous regions of a miscible polycarbonate/polyester blend

Homopolymers and blends of polycarbonate/ThermX have been investigated by differential scanning calorimetry, dynamic mechanical analysis, density measurements, and positron annihilation lifetime spectroscopy. The study focuses on the chain mobility and free volume in the amorphous miscible regions of the blends and how this mobility and free volume are affected by increasing crystallinity. It is proposed that judicious annealing, which results in increasing crystallinity (while avoiding ageing or transesterification), induces a constraint on the amorphous region leading to an increase in T_g and coalescence of free volume sites. © 1994 John Wiley & Sons, Inc.     

Spectroscopic study on the complex formation of chromogenic bridged calixarenes with aliphatic amines

The complex formation between chromogenic capped calix 4 arene derivatives comprising indophenol indicator group(s), and aliphatic amines has been studied by UV/Vis spectroscopy. The equilibrium constants have been determined in ethanol, and—for one ligand—also in dimethylsulfoxide. The results have been interpreted in terms of various types of host–guest interactions and of steric effects.     

人工神经网络方法预测气相色谱保留值

本文运用一典型的人工神经网络模型－“反向传播“模型的改进形式，研究了诱导效应指数Ｉ，摩尔折射度Ｒｏ，疏水亲脂参数ＩｇＰ，以及分子联通性指数与气象色谱保留行为的关系，实现了对色谱保留植的预测。神经网络预测模型的最大相对误差不超过８．７％。结果表明，该方法性能良好，可望成为色谱保留值预测的有效手段。     

INFLUENCE OF COMPOSITIONAL HETEROGENEITY ON MORPHOLOGY AND PROPERTIES OF SEGMENTED COPOLYMERS

Polyethylene terephthalate(PET)/polycaprolactone(PCL) segmented copolymers with different hard segment contents and a blend of two of them were studied by using DSC, WAXS, TEM and IR techniques and dynamic mechanical, stress-strain and isothermal crystallization measurements. Emphasis was laid on the studies of influence of compositional heterogeneity on the morphology and properties of these segmented copolymers. It was found that the solution cast specimens of the more heterogeneous sample exhibit better segregation of segments, high crystallinity and melting temperature. They have higher thermal stability of mechanical properties at small deformations. However, they are less stable against large deformations and may become softer than the more homogeneous ones.     

水溶性聚酯的结构和性能

由对苯二甲酸二甲酯、间苯二甲酸、间苯二甲酸二甲酯５－磺酸钠与乙二醇等共缩聚合成的ＰＥＴ型水溶性聚酯（ＷＳＰ）是一种新型的水溶性聚合物，在化纤、纺织、涂料、粘合剂、电子、油墨等领域有着广泛的应用前景．化纤领域超细纤维新材料的研究、开发和生产，迫切需要一...     

Mass spectrometric analysis of low molecular mass polyesters by laser desorption/ionization on porous silicon

A low molecular mass polyester was analyzed by desorption/ionization on porous silicon (DIOS) mass spectrometry. The results were compared with those of matrix-assisted laser desorption ionization (MALDI) mass spectrometry using matrixes of alpha-cyano-4-hydroxycinnamic acid (CHCA) and 10,15,20-tetrakis(pentafluorophenyl)porphyrin (F20TPP). The CHCA matrix was not suitable for characterization of low molecular mass components of the polyester because the matrix-related ions interfered with the component ions. On the other hand, the F20TPP matrix showed no interference because no matrix-related ions appeared below m/z 822. However, the solvent selection for determining optimal conditions of sample preparation was limited, because F20TPP does not dissolve readily in any of the available organic solvents. In the DIOS spectra, the polymer ions were observed at high sensitivity without a contaminating ion. No matrix is needed for DIOS spectra of low molecular mass polyesters, facilitating sample preparation and selectivity of a precursor ion in post-source decay measurements.     

Concentration and clean-up of trace hydrocarbons from atmospheric particulate matter

Summary The aim of this work is to establish the best conditions for concentration and purification steps in the trace analysis of aliphatic and polycyclic aromatic hydrocarbons (PAH) from atmospheric particulate matter by gas chromatography-flame ionisation detection (GC-FID) and high performance liquid chromatography with ultraviolet and fluorescence detection (HPLC-UV-FL). The best results for the more volatile compound were obtained with a combination of rotary evaporation and a stream of nitrogen (near to 100% for aliphatic hydrocarbons and from 70 to 105% for PAH). Two types of solid phase extraction (SPE)cartridges (Supelclean ^tm LC-Silica SPE tubes and Sep-Pak^? Plus silica cartridges) and glass column were examined for the purification and fractionation step. Blank chromatograms of both types of cartridges analysed by GC-FID made this study difficult, because a PSS (programmed split-splitless) injector was employed thereby increasing the sensitivity. This problem was not observed in the HPLC-UV-FL blank chromatograms of these cartridges. Glass columns filled with silica and alumina were chosen because no interference was found in the GC-FID blank chromatograms and the best recoveries in the fractionation of both aliphatic hydrocarbons and PAH were achieved. This is especially important when aliphatic hydrocarbons concentrations are lower than 1 μg mL⁻¹. Finally, the selected conditions were applied to the analysis of hydrocarbons in real atmospheric particulate samples.