Assessment of Noise Exposure of Sawmill Workers in Southwest,Nigeria

Economic wood processing employs the use of industrial machines for cutting, shaping, milling, and sawing timber, thereby leading to the generation of high levels of noise. Published data from empirical studies have categorized noise as an environmental hazard of global significance. Furthermore, noise exposure limits for different industries and all the industrial machines available has not been formally established as it presently exists in developed nations around the world. Therefore, this study assessed the daily exposure of sawmills workers to noise in Southwestern Nigeria. Reconnaissance surveys were first carried out in Osun, Oyo, Ondo, Ekiti, Lagos, and Ogun States to select sawmills that were fully operational and fit for the study. Two fully functional sawmills in two cities of each State were eventually selected for data collection, making a total of 24 sawmills, while the Circular Machines (CM), Planer Machines (PM), and Band-saw Machines (BM) were the machines in each sawmill considered. Two machines each of CM, PM, and BM were considered in each sawmill, making a total of forty-eight (48) machines each of CM, PM, and BM. Sound data were collected between 7 am and 7 pm each day for six days (between Monday and Saturday) using Extech 407732 sound level meter and all stabilized measurements were taken three times at different intervals. The data collected were in three different periods: Machine No-work Period (NP_m), Machine Idle Period (IP_m), and Machine Working Period (WP_m). A two–way Analysis of Variance (ANOVA) was carried out at P < 0.05 to determine whether there is a significant difference in the sound level average before and after the break, for both the idle and working periods of the three machines considered. This was also done to determine whether there is a significant difference between the sound level average of the results collected during idle and working periods of the three machines. Noise Pollution Levels (L_np) ranged from 83.20 dB (PM) to 107.65 (BM) and 93.42 (CM and PM) – 116.00 (BM) respectively, while IP_m also gave the least noise pollution level of 95.79 dB and WP_m gave the highest level of 102.88 dB. The results revealed that all the machines’ L_np values in the working period are more than the 90 dB acceptable limit the recommendation value of 90 dB while 89.6% of CMs, 75% of PMs, and 89.6% of BM had their L_np above 90 dB in the idle period respectively. The minimum and the maximum noise dose levels for IP_m, WP_m and overall are 0.09 (BM) and 2.37 (CM), 0.50 (CM), and 4.77 (PM) and 0.69 (BM) and 6.64 (PM) respectively. The study found out that the fundamental contributing factors to the high noise levels in sawmills are poor machine maintenance, use of old and obsolete machines, poor housekeeping strategy, limited space, workers’ negligence, lack of PPE, and lack of occupational safety training. The study recommends that proper workplace practices such as use of personal protective equipment, new and modern machines, training, and occupational safety programmes be implemented in the considered sawmills.     

Current air quality analytics and monitoring: A review

This review summarizes the different tools and concepts that are commonly applied in air quality monitoring. The monitoring of atmosphere is extremely important as the air quality is an important problem for large communities. Main requirements for analytical devices used for monitoring include a long period of autonomic operation and portability. These instruments, however, are often characterized by poor analytical performance. Monitoring networks are the most common tools used for monitoring, so large-scale monitoring programmes are summarized here. Biomonitoring, as a cheap and convenient alternative to traditional sample collection, is becoming more and more popular, although its main drawback is the lack of standard procedures. Telemonitoring is another approach to air monitoring, which offers some interesting opportunities, such as ease of coverage of large or remote areas, constituting a complementary approach to traditional strategies; however, it requires huge costs.     

空气/水界面水分子的取向和运动

对四种不同的实验构型下空气／水界面自由O-H键在3700cm~(-1)的和频振动光谱的分析表明,水分子在空气／水界面的取向运动只可能是在平衡位置附近有限角度之内的受限转动。界面水分子的自由O-H键取向距界面法线约33°,而取向分布或运动的宽度不超过15°。这一图像显著地不同于Wei等人(Phys. Rev. Lett.86,4799(2001))只通过单一的SFG实验构型所得出结论,即：空气／水界面的水分子在超快的振动弛豫时间内在很大的角度范围内运动。     

遥感傅里叶变换红外光谱的大气层析技术

遥感傅里叶变换红外光谱层析技术是一项新的气体分析技术，它可用于构造气体浓度峰图形，定量分析工业污染气体总释放量等方面，随着算法的不断优化，在重构气体在空间的分布方面，遥感傅里叶变换红外光谱层析技术正在不断成长。     

养殖池塘沉积物的重金属分布及污染特征

浙江省淅西北地区淡水养殖池塘沉积物重金属调查研究表明，养殖池塘沉积物中7种重金属元素分布不均衡，差异也较大，除Hg和Cr元素外，其余重金属元素已大大超过土壤本底值．虽然其实测含量都未超出国家规定的标准值范围，但沉积物中重金属元素对养殖水环境、养殖品种存在的潜在污染与危害值得关注．污染指数评价显示，养殖池塘沉积物中主要污染物质为Cu和Cr，而Hg、Pb污染程度相对较轻．     

三角帆蚌对水体Cr,Pb和Cd的净化与吸收

三角帆蚌（Hyriopsis cumingii Lea）对水体Cr,Pb,Cd污染有明显的净化能力，持续处理12d，能使水体Cr,Pb,Cd含量分别下降83％，77．6％和72％。蚌体的斧足、鳃、外磁膜、体表粘液、肝脏、肠道和生殖腺等组织对3种污染物的吸收和富集作用不尽相同，其中分别以体表粘液、鳃和肝脏最为显著。3种污染物进入蚌体的速度很快，其组织吸收量一般在第3天即可达到较高水平。进入蚌体的污染物，可在组织转移和重新分布。研究结果为生物治理Cr,Pb,Cd等重金属污染积累了资料。     

A MINI MULTI-GAS DETECTION SYSTEM BASED ON INFRARED PRINCIPLE

To counter the problems of gas accidents in coal mines, family safety resulted from using gas, a new infrared detection system with integration and miniaturization has been developed. The infrared detection optics principle used in developing this system is mainly analyzed. The idea that multi gas detection is introduced and guided through analyzing single gas detection is got across. Through researching the design of cell structure, the cell with integration and miniaturization has been devised. The way of data transmission on Controller Area Network (CAN) bus is explained. By taking Single-Chip Microcomputer (SCM) as intelligence handling, the functional block diagram of gas detection system is designed with its hardware and software system analyzed and devised. This system designed has reached the technology requirement of lower power consumption, mini-volume, big measure range, and able to realize multi-gas detection.     

Catalytic air oxidation of ambient temperature hydrocarbons

Catalytic air oxidation of the aliphatic hydrocarbons n-decane, hexanes, gasoline and diesel fuel was conducted at ambient temperature with novel iron catalysts. The concentration of n-decane in water was reduced from 1.42 g in 100 ml to 0.07 g in 100 ml in 5 h at room temperature forming carbon monoxide and water by means of intermediate aldehydes. Results of FT–IR and GC–MS analyses demonstrated formation of aldehydes and unsaturated alcohols. Carbon monoxide was detected on catalyst residues and in the vapor phase. The indicated catalytic reaction mechanisms are discussed.     

Nitrated polynuclear aromatic hydrocarbons in ambient air in Italy. A brief overview

When nitrated polynuclear aromatic hydrocarbons (NPAH) were recognised as long‐term toxic compounds and were also identified in several anthropogenic emissions and among the by‐products of photochemical smog they became objects of investigation in ambient air in both polluted and clean environments. In Italy the first investigations focussing on atmospheric NPAH were performed in the early eighties and encompassed both the canyon streets and dwelling areas of Rome. Because NPAH were indicated as markers of vehicle emission, new investigations were performed in other cities and also in rural and (nominally) unpolluted locations. In general, the first measurements of NPAH were episodic and could not be assumed to be strictly representative of the sites investigated. In contrast, nowadays consistent data bases on NPAH have been built up and are discussed in the technical literature, so that both neat concentrations and the yearly timed variation of the most important NPAH congeners have been measured in Italian air. Although concentrations of NPAH in air are usually much lower than those of PAH, owing to their very high potency in inducing mutations and tumours NPAH are regarded as having an important health impact on populations living in Italian urban areas. In this regard the genotoxicity of atmospheric aerosols is partly associated with nitrofluoranthenes and nitropyrenes whereas nitronaphthalenes and methylnitronaphthalenes seem to contribute to that of the gaseous organic fraction. Several civic and regional administrations are introducing control of atmospheric NPAH among ways of improving air quality in cities.