Polymer 4D printing: Advanced shape-change and beyond

4D printing is an exciting branch of additive manufacturing. It relies on established 3D printing techniques to fabricate objects in much the same way. However, structures which fall into the 4D printed category have the ability to change with time, hence the “extra dimension.” The common perception of 4D printed objects is that of macroscopic single-material structures limited to point-to-point shape change only, in response to either heat or water. However, in the area of polymer 4D printing, recent advancements challenge this understanding. A host of new polymeric materials have been designed which display a variety of wonderful effects brought about by unconventional stimuli, and advanced additive manufacturing techniques have been developed to accommodate them. As a result, the horizons of polymer 4D printing have been broadened beyond what was initially thought possible. In this review, we showcase the many studies which evolve the very definition of polymer 4D printing, and reveal emerging areas of research integral to its advancement.     

Additive Hermitian idempotent preservers between operator algebras

Let L be an additive map between (real or complex) matrix algebras sending $n\times n$ Hermitian idempotent matrices to $m\times m$ Hermitian idempotent matrices. We show that there are nonnegative integers $p,q$ with $n(p+q)=r\le m$ and an $m\times m$ unitary matrix U such that$L(A)=U[(I_p?A)\oplus (I_q?A^t)\oplus 0_{m?r}]U^{?},\text{for any}n\times n\text{Hermitian}A\text{with rational trace}.$ We also extend this result to the (complex) von Neumann algebra setting, and provide a supplement to the Dye-Bunce-Wright Theorem asserting that every additive map of Hermitian idempotents extends to a Jordan ?-homomorphism.     

幅相一致行波管高频电路CAD研究

 在行波管的设计和装配过程中，各部件的尺寸必须严格控制，高频电路参数的离散对行波管色散特性有极大的影响。使用螺旋导电面模型，模拟计算了高频结构各主要参数离散对色散特性和轴向互作用耦合阻抗的影响。分析计算了夹持杆宽度、翼片高度、螺旋线平均半径、螺距、夹持杆介电常数等离散时对色散特性和轴向互作用耦合阻抗的影响，为新型幅相一致行波管的设计和生产提供了很有价值的参考建议。     

An Additive Problem with Primes in Arithmetic Progressions

In this paper, we extend a classical result of Hua to arithmetic progressions with large moduli. The result implies the Linnik Theorem on the least prime in an arithmetic progression.     

Φ520mmF/1.6椭球面反射镜加工

介绍了一块Φ520mm大相对孔径(F/1.6)轻量化椭球面反射镜的加工与检测方法。镜面的有效口径为Φ502mm,顶点曲率半径为1600mm,非球面系数k=-0.9663,面形精度要求优于0.025λ(RMS)。镜子背面有54个大小深浅不一的不通孔,用于减轻镜子的重量。采用WYKO干涉仪检测得到镜面面形误差达RMS0.02λ,λ=632.8nm。     

硬盘磁头-碟界面润滑剂失效机理及添加剂X-1P的性能研究

采用热重分析 (TGA)、傅立叶红外光分析 (FTIR)和磁头起飞降落 (CSS)等试验方法 ,研究了硬盘磁头 碟界面润滑层PFPE的失效机理以及添加剂X 1P在磁头 碟界面润滑剂中的作用 .研究结果表明 ,高温条件下磁头材料Al2 O3 会诱导磁头 碟界面润滑剂PFPE发生歧化降解 ,造成磁头 碟界面润滑层失效 ;添加剂X 1P因其特殊的分子结构和化学性能 ,可作为一种有效稳定剂添加到磁头 碟润滑剂PFPE中 ,减弱磁头材料Al2 O3 作为催化反应中心的催化反应活性 ,减缓磁头 碟界面润滑剂PFPE的高温歧化降解 ,改善磁头 碟界面的CSS性能     

Additive Maps Preserving Nilpotent Operators or Spectral Radius

Let X be a （real or complex） Banach space with dimension greater than 2 and let B0（X） be the subspace of B（X） spanned by all nilpotent operators on X. We get a complete classification of surjective additive maps Ф on B0（X） which preserve nilpotent operators in both directions. In particular, if X is infinite-dimensional, we prove that Ф has the form either Ф（T） = cATA^-1 or Ф（T） = cAT＇A^-1, where A is an invertible bounded linear or conjugate linear operator, c is a scalar, T＇ denotes the adjoint of T. As an application of these results, we show that every additive surjective map on B（X） preserving spectral radius has a similar form to the above with ｜c｜ = 1.     

多级制造系统的最优化模型及其应用

多级制造系统是现代制造业的主要加工方式，系统的每一级的加工速度和加工周期是系统设计的主要决策变量，正确确定这两个变量是系统得到优化的主要目标。本文导出了系统优化的基本模型，它包括系统各级的生产时间、等待时间、生产速度、生产成本以及系统的循环时间、总成本、产品利润和利润率等，并给出了一个应用实例。     

Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Domain decomposition for an asymptotic geological fault modeling

We present in this paper a domain decomposition method to treat faults in geological basin modeling. The particularity of this model is that the faults whose widths are very small in comparison with the basin size, are not characterized as subdomains any more but as interfaces between sedimentary blocks. The originality of this work lies in the formulation of this new fault model and in the definition and the computation of the interface conditions between the subdomains. To cite this article: E. Flauraud et al., C. R. Mecanique 331 (2003).