17N+197Au反应中碎片与中子的符合测量

在3?3?.4MeV/u ¹⁷N束轰击¹⁹⁷Au靶产生的反应中,利用放置于不同角度组合的17个中子探测器(4°—83°)和14个半导体望远镜(2.3°—9.0°)对反应产物碎片与中子进行了符合测量.经对所得实验角分布积分得到Z=3—6元素的同位素产额分布.在参加者-旁观者模型框架下,采用¹⁷N原子核内部的不同密度分布计算了同位素产额分布并与实验数据做比较.     

X-ray photoelectron spectroscopy characterization of oxidated Si particles formed by pulsed ion-beam ablation

X-ray photoelectron spectroscopy (XPS) is used to probe oxidation states of Si species in particles deposited using a pulsed ion-beam evaporation method. The effects of He ambient gas, ion beam intensity and post-treatments on the oxides composition and oxygen content have been studied. It is found that presence of He ambient gas led to a profound oxidation of Si species as compared to that prepared in vacuum at the same ion-beam ablation energy, i.e. both increase of SiO₂ component and oxygen concentration in the oxides coverage. The deposition in He also resulted in an increase of oxygen concentration even under lower ablation intensity, but a higher Si suboxides concentration. It is revealed that the reaction between Si and O was controlled by the ion beam intensity (temperature of Si plasma) and the gas ambient (collision probability of Si and O species). The difference in structure of oxide layers for samples obtained under various conditions is discussed based on the results of XPS analyses.     

The effect of microscopic features upon the transmissivity of enclosed laser ablated laminated metallised polymer films

A vacuum-deposited aluminium layer (20 nm) is sandwiched between two layers of laminated oriented polypropylene (OPP) film whose thickness varies from 20 to 40 μm. Selected areas of this sealed system were transparentised by the redistribution of the aluminium layer without breaking the seal or causing damage to the OPP film using a 75 W Q-switched Nd:YAG laser. The resultant transparentised films contain aluminium particles, distorted polymer areas and intact areas of the vacuum-coated aluminium layer. This paper investigates the effect of microscopic features upon the overall transmissivity of the laser-treated films and hence the quality of the transparentisation process.     

Applying the combined integral method to one-dimensional ablation

In this paper the combined integral method is applied to a simple one-dimensional ablation problem. One of the drawbacks of heat balance integral methods is how to choose the approximating function. It is common to use a polynomial form but even then it is not clear what the power of the highest order term should be. Previous studies have determined exponents either from exact solutions or from expansions valid over short time scales; neither approach is satisfactory nor very accurate for larger times. We combine the heat balance and refined integral methods to determine this exponent as part of the solution process, and conclude that it is in fact time-dependent in the ablation stage. From comparing the approximate solutions with numerical and exact analytical solutions whenever possible, we show that this new method greatly improves the accuracy on standard methods, without overcomplicating the method.     

Investigation of different liquid media and ablation times on pulsed laser ablation synthesis of aluminum nanoparticles

Aluminum nanoparticles were synthesized by pulsed laser ablation of Al targets in ethanol, acetone, and ethylene glycol. Transmission Electron Microscope (TEM) and Scanning Electron Microscope (SEM) images, Particle size distribution diagram from Laser Particle Size Analyzer (LPSA), UV-visible absorption spectra, and weight changes of targets were used for the characterization and comparison of products. The experiments demonstrated that ablation efficiency in ethylene glycol is too low, in ethanol is higher, and in acetone is highest. Comparison between ethanol and acetone clarified that acetone medium leads to finer nanoparticles (mean diameter of 30 nm) with narrower size distribution (from 10 to 100 nm). However, thin carbon layer coats some of them, which was not observed in ethanol medium. It was also revealed that higher ablation time resulted in higher ablated mass, but lower ablation rate. Finer nanoparticles, moreover, were synthesized in higher ablation times.     

Visualization and In Situ Ablation of Intracellular Bacterial Pathogens through Metabolic Labeling

Protected by the host cells, the hidden intracellular bacteria are typically difficult to kill by common antibiotics and cannot be visualized without complex cellular pretreatments. Herein, we successfully developed a bacteria-metabolizable dual-functional probe TPEPy-d -Ala, which is based on d -alanine and a photosensitizer with aggregation-induced emission for fluorescence turn-on imaging of intracellular bacteria in living host cells and photodynamic ablation in situ. Once metabolically incorporated into bacterial peptidoglycan, the intramolecular motions of TPEPy-d -Ala are inhibited, leading to an enhanced fluorescent signal, which allows the clear visualization of the intracellular bacteria. Moreover, TPEPy-d -Ala can effectively ablate the labeled intracellular bacteria in situ owing to covalent ligation to peptidoglycan, yielding a low intracellular minimum inhibitory concentration (MIC) of 20±0.5 μg mL⁻¹, much more efficient than that of a commonly used antibiotic, vancomycin.     

飞秒激光脉冲作用下氧化镁的烧蚀及其超快动力学过程

研究了双面抛光氧化镁单晶（111）表面800 nm飞秒激光单脉冲烧蚀阈值和激光脉宽的依赖关系.利用泵浦-探针技术,测量不同能量和脉宽作用下飞秒激光烧蚀的时间分辨反射率的演化.通过扫描电镜观察其烧蚀形貌,发现大量的沿氧化镁［100］晶向开裂的裂纹.讨论了表面裂纹的形成机理,并解释了飞秒激光烧蚀氧化镁的超快动力学过程.     

激光烧蚀铜产生原子和离子光谱线的研究

通过测定Nd∶YAG脉冲激光烧蚀金属Cu诱导产生光谱线及其强度随时间与空间的分布,结果表明等离子体辐射光谱线由原子光谱线、离子光谱线及连续辐射背景光组成,Cu原子光谱线的数目不仅比离子光谱线多,而且辐射强度比离子光谱线的大,以连续辐射背景光的辐射强度为最弱;原子光谱线的发光范围最大,持续时间最长;离子光谱线发光范围中等,持续时间中长;连续辐射背景光的发光范围最小,持续时间最短.讨论了激光诱导发光的机理,认为等离子体羽中连续辐射背景光主要来自近靶处高能电子的韧致辐射和电子与离子的复合激发,原子和离子光谱线主要由等离子体中高能电子的碰撞传能激发所引起,并用之较好地解释了所观察的实验现象.     

Microscopic phenomena found within enclosed surface laser ablation of 20 nm thick aluminium films

This paper investigates the microscopic features which occur when a four-layered film is ablated using Q-switched Nd:YAG laser. The four-layered films consist of a vacuum-deposited aluminium layer (0.02 μm) upon an oriented polypropylene (OPP) film (30 μm) which has been laminated using an inert adhesive and a second OPP film. Laser radiation is absorbed principally by the aluminium layer, melting and/or vaporising it. Upon cooling, the aluminium layer is rearranged into discrete microscopic particles, which give laser-treated areas of the film a transparent appearance. Within the films are found microscopic features, which can be divided into three distinct types: aluminium demetallisation features, polymer distortion features and particle features. Features from each of these categories can exist within a single laser track depending upon the laser parameters used for transparentisation.     

中能Abrasion-Ablation模型的核内核子密度分布修正

将具体的核内核子(包括中子、质子)密度分布引入到中能Abrasion-Ablation模型中,用修正后的模型计算了30MeV/u ⁴⁰Ar+^natAg反应中的弹核碎裂过程.结果表明,在非常周边的碰撞中,修正后的模型计算的碎片截面与修正前的计算相比有明显的差别,反映了核密度边缘弥散的影响.与实验结果的比较验证了中能弹核碎裂碎片能量相对于束流能量的降低是由摩擦作用引起的.