阳极溶出伏安法测定塑料制品中的铜和铅

铅等重金属的化合物常用作塑料的稳定剂。由于铅等重金属对人体有害,因此研究塑料制品中铅、铜含量对人体健康的影响是环境卫生学急待解决的问题。本文介绍的方法中,0.5M HCl既作为干法灰化塑料残渣的溶解液,同时又是测定铜、     

Pt‐Nanoparticle Incorporated Carbon Paste Electrode for the Determination of Cu(II) Ion by Anodic Stripping Voltammetry

Pt‐nanoparticles were synthesized and introduced into a carbon paste electrode (CPE), and the resulting modified electrode was applied to the anodic stripping voltammetry of copper(II) ions. The synthesized Pt‐nanoparticles were characterized by cyclic voltammetry, scanning electron microscopy and X‐ray photoelectron spectroscopy techniques to confirm the purity and the size of the prepared Pt‐nanoparticles (ca. 20 nm). This incorporated material seems to act as catalysts with preconcentration sites for copper(II) species that enhances the sensitivity of Cu(II) ions to Cu(I) species at a deposition potential of ?0.6 V in an aqueous solution. The experimental conditions, such as, the electrode composition, pH of the solution, pre‐concentration time, were optimized for the determination of Cu(II) ion using as‐prepared electrode. The sensitivity changes on the different binder materials and the presence of surfactants in the test solution. The interference effect of the coexisted metals were also investigated. In the presence of surfactants, especially TritonX‐100, the Cu(II) detection limit was lowered to 3.9×10^?9 M. However, the Pt‐nanoparticle modified CPE begins to degrade when the period of deposition exceeds to 10 min. Linear response for copper(II) was found in the concentration range between 3.9×10^?8 M and 1.6×10^?6 M, with an estimated detection limit of 1.6×10^?8 M (1.0 ppb) and relative standard deviation was 4.2% (n=5).     

A selective electromembrane extraction of uranium (VI) prior to its fluorometric determination in water

A novel method for the selective electromembrane extraction (EME) of U⁶⁺ prior to fluorometric determination has been proposed. The effect of extraction conditions including supported liquid membrane (SLM) composition, extraction time and extraction voltage were investigated. An SLM composition of 1% di-2-ethyl hexyl phosphonic acid in nitrophenyl octyl ether (NPOE) showed good selectivity, recovery and enrichment factor. The best performance was achieved at an extraction potential of 80 volts and an extraction time of 14 minutes Under the optimized conditions, a linear range from 1 to 1000 ng mL⁻¹ and LOD of 0.1 ng mL⁻¹ were obtained for the determination of U⁶⁺. The EME method showed good performance in sample cleanup and the reduction of the interfering effects of Mn²⁺, Zn²⁺, Cd²⁺, Ni²⁺, Fe³⁺, Co²⁺, Cu²⁺, Cl⁻ and PO₄³⁻ ions during fluorometric determination of uranium in real water samples. The recoveries above 54% and enrichment factors above 64.7 were obtained by the proposed method for real sample analysis.     

Anodic stripping voltammetry of antimony at unmodified carbon electrodes

Antimony is an element of significant environmental concern, yet has been neglected relative to other heavy metals in electroanalysis. As such very little research has been reported on the electroanalytical determination of antimony at unmodified carbon electrodes. In this paper we report the electrochemical determination of Sb(III) in HCl solutions using unmodified carbon substrates, with focus on non-classical carbon materials namely edge plane pyrolytic graphite (EPPG), boron doped diamond (BDD) and screen-printed electrodes (SPE). Using differential pulse anodic stripping voltammetry, EPPG was found to give a considerably greater response towards antimony than other unmodified carbon electrodes, allowing highly linear ranges in nanomolar concentrations and a detection limit of 3.9?nM in 0.25?M HCl. Furthermore, the sensitivity of the response from EPPG was 100 times greater than for glassy carbon (GC). Unmodified GC gave a comparable response to previous results using the bare substrate, and BDD gave an improved, yet still very high limit of detection of 320?nM compared to previous analysis using an iridium oxide modified BDD electrode. SPEs gave a very poor response to antimony, even at high concentrations, observing no linearity from standard additions, as well as a major interference from the ink intrinsic to the working electrode carbon material. Owing to its superior performance relative to other carbon electrodes, the EPPG electrode was subjected to further analytical testing with antimony. The response of the electrode for a 40?nM concentration of Sb(III) was reproducible with a mean peak current of 1.07?µA and variation of 8.4% (n?=?8). The effect of metals copper, bismuth and arsenic were investigated at the electrode, as they are common interferences for stripping analysis of antimony.     

DNA在纳米金标上的组装、杂交、检测与银增强

利用电化学方法进行DNA的杂交检测.将目标ss-DNA固定在玻碳电极表面, 使其与纳米金标记的互补DNA发生杂化反应, 通过银增强试剂（该种试剂可以使银在纳米金表面沉积, 达到信号增强的效果）在纳米金上沉积银, 形成银包金的核壳结构.在酸性介质中沉积的银被氧化释放, 以离子状态存在于溶液中.用阳极溶出伏安法(ASV)检测银离子从而达到间接检测目标DNA的目的.测定结果表明，ss-DNA的浓度在100～1 000 pmol•L－1 范围内有非常好的线性关系, 检测限为10 pmol•L－1.     

上海股市波动的预测方式和模型

探讨基于 SV类模型的上海股市波动的预测方式和模型问题 .比较了 SV( stochastic volatility)类模型 (包括基本 SV模型和 ASV模型 )在两种不同方式下的预测效果 ,并将基本 SV类模型的预测效果与 ASV模型 ,以及其他常用模型做了比较 .结果表明 :SV类模型在两种预测方式下的预测效果存在一定的差异 ;基本 SV模型对于上海股市具有较强的预测能力 ;ASV模型的预测效果不理想 .     

Stripping Chronopotentiometry and Stripping Voltammetry of Mixtures of Heavy Metal Ions Producing Close Signals: The Cd(II)‐Pb(II)‐Phthalate System

The effects of the proximity of the signals of two heavy metal ions in stripping voltammetry (SV) and constant‐current stripping chronopotentiometry (SCP) is studied at mercury drop (HMDE) and mercury film (MFE) electrodes. For this purpose, the Cd(II)‐Pb(II)‐phthalate system is used, taking advantage of the approaching of the signals corresponding to Cd(II)‐phthalate and Pb(II)‐phthalate labile complexes as phthalate is added to mixtures of Cd(II) and Pb(II)‐ions. The results are compared with those obtained by differential pulse polarography (DPP) and by stripping measurements on the Pb(II)‐phthalate system alone, showing discrepancies in SCP data under nondepletive conditions and negligible differences in the other cases.     

NMR signal processing,prediction, and structure verification with machine learning techniques

Machine learning (ML) methods have been present in the field of NMR since decades, but it has experienced a tremendous growth in the last few years, especially thanks to the emergence of deep learning (DL) techniques taking advantage of the increased amounts of data and available computer power. These algorithms are successfully employed for classification, regression, clustering, or dimensionality reduction tasks of large data sets and have been intensively applied in different areas of NMR including metabonomics, clinical diagnosis, or relaxometry. In this article, we concentrate on the various applications of ML/DL in the areas of NMR signal processing and analysis of small molecules, including automatic structure verification and prediction of NMR observables in solution.     

Detection of Trace Zinc by an Electrochemical Microsensor based on Carbon Nanotube Threads

Carbon nanotubes (CNTs) have attracted intense interest due to their excellent properties, such as increased electrode surface area, fast electron transfer rate, significant mechanical strength and good chemical stability. CNT threads, spun from shorter CNTs, inherit the advantages of CNTs, while avoiding the potential toxicity caused by individual CNTs. In this work, microelectrodes based on CNT threads were used to detect trace zinc by anodic stripping voltammetry with an estimated detection limit of 1.4 nM without mercury or bismuth films. CNT threads showed promise for measuring trace metals in small sample volumes without stirring such as encountered in some in vivo and in vitro applications.     

Recent developments and applications of screen-printed electrodes in environmental assays—A review

Screen-printed electrodes (SPEs), which are used as economical electrochemical substrates, have gone through significant improvements over the past few decades with respect to both their format and their printing materials. Because of their advantageous material properties, such as disposability, simplicity, and rapid responses, SPEs have been successfully utilised for the rapid in situ analysis of environmental pollutants. This critical review describes the basic fabrication principles, the configuration designs of SPEs and the hybrid analytical techniques based on SPEs. We mainly overview the electrochemical applications of SPEs in environmental analysis over the past 3 years, including the determination of organic compounds, heavy metals and gas pollutants.