Synthesis of a highly active amino‐functionalized Fe3O4@SiO2/APTS/Ru magnetic nanocomposite catalyst for hydrogenation reactions

An amino‐functionalized silica‐coated Fe₃O₄ nanocomposite (Fe₃O₄@SiO₂/APTS) was synthesized. The Fe₃O₄@SiO₂ microspheres possessed a well‐defined core–shell structure, uniform sizes and high magnetization. An immobilized ruthenium nanoparticle catalyst (Fe₃O₄@SiO₂/APTS/Ru) was obtained after coordination and reduction of Ru³⁺ on the Fe₃O₄@SiO₂/APTS nanocomposite. The Ru nanoparticles were not only ultra‐small with nearly monodisperse sizes but also had strong affinity with the surface of Fe₃O₄@SiO₂/APTS. The obtained catalyst exhibited excellent catalytic performance for the hydrogenation of a variety of aromatic nitro compounds, even at room temperature. Moreover, Fe₃O₄@SiO₂/APTS/Ru was easily recovered using a magnetic field and directly reused for at least five cycles without significant loss of its activity.     

二氧化硅表面的APTS修饰

3-氨丙基三乙氧基硅烷（APTS）修饰的二氧化硅在生物化学、分析、催化、电子学等领域具有重要的应用前景。本文对近年来APTS修饰二氧化硅的研究进展进行了简要的概述,介绍了APTS修饰二氧化硅的典型方法和APTS修饰层的表征手段,探讨了不同修饰方法可控性及对所形成的APTS层结构及稳定性的影响。     

寡糖—8—氨基芘—1,3,6—三磺酸衍生物的毛细管电泳—激光诱？…

利用自组装的毛细管电泳－激光诱导荧光装置,研究了多种寡糖－８－氨基芘－１,３,６－三磺酸（寡糖ＡＰＴＳ）衍生物的分离。考察了电泳介质、浓度及pＨ对寡糖－ＡＰＴＳ 衍生物分离的影响,在酸性和碱性条件下,分别实现了痕量寡糖标准品及葡聚糖水解产物的高效分离。     

Co-NH2-SBA-15的制备及其脱硫性能研究

采用水热合成法制备介孔分子筛SBA-15,用（CH₃COO）₂Co对其进行超声浸渍改性,并用硅烷偶联剂APTS将氨基引入SBA-15分子筛中,制备出Co-NH₂-SBA-15吸附剂,考察了常温条件下H₂S的吸附性能。通过SEM、XRD、FT-IR、BET、XPS等表征手段对吸附剂进行表征。结果表明,氨基与金属同时负载在分子筛表面,氨基与硅物质的量比为0.20,Co负载质量分数为8%的SBA-15吸附效果最好,当原料气H₂S体积分数为227 μL/L,温度25 ℃,气体流量75 mL/min时,穿透硫容和饱和硫容达0.151和0.190 mmol/g,且吸附剂可再生利用。SBA-15表面嫁接氨基并浸渍金属改性的手段不仅提高了吸附容量,同时提高了分子筛的稳定性。     

Determination of nitrocellulose by capillary electrophoresis with laser-induced fluorescence detection

The industrial application of nitrocellulose depends on its nitrogen content. When nitrocellulose presents high nitrogen content is used in the manufacture of explosives whereas nitrocellulose with low nitrogen content is used to make a wide range of daily and non-explosive products (e.g. cigarettes, paints, lacquers). This fact makes really important to develop a method for the determination and discrimination of nitrocellulose samples. This work reports, for the first time, the qualitative determination of nitrocellulose previously derivatized with 8-aminopyrene-1,3,6-trisulfonic acid (APTS) by capillary electrophoresis (CE-LIF) with laser-induced fluorescence detection (CE-LIF). APTS-labeled nitrocellulose was determined in lowly and highly nitrated nitrocellulose samples present in collodions and smokeless gunpowders, respectively, after their pulverization in liquid nitrogen. The method described enables the visual discrimination of different nitrocelluloses on the basis of the different electrophoretic profiles obtained, and provides a useful tool to determine nitrocellulose. Additionally, the use of field-amplified sample injection (FASI) enabled enhanced sample detection, which made it possible to determine nitrocellulose contained in ∼15 μg of gunpowder.     

Synthesis of new hydrogels based on the macromolecular reaction of citraconic anhydride copolymers with γ‐aminopropyltriethoxysilane (APTS)

This work describes the synthesis and macromolecular reactions of citraconic anhydride (CA)–acrylamide (AAm) binary reactive copolymers with γ‐aminopropyltriethoxysilane (APTS) as a polyfunctional crosslinker. Copolymers with given composition of poly(CA‐alt‐AAm) were synthesized by radical binary copolymerization with benzoyl peroxide (BPO) as an initiator in benzene at 70°C in nitrogen atmosphere with initial monomer ratio 1 : 1. It was shown that the network structure is formed in poly(CA‐alt‐AAm)/APTS in water by intermolecular reactions between the anhydride unit and the amine group, as well as between the ethoxysilyl fragment and free carboxyl groups of the CA unit and amide unit of AAm. Swelling parameters such as beginning time of the hydrogel‐formation, initial rate of the swelling, swelling rate constant, equilibrium swelling and equilibrium water content were determined for the copolymer/APTS/water system with certain (2.75 : 1) copolymer/crosslinker ratio. Formation of a hyperbranched network structure through the fragmentation of side‐chain reactive groups in studied systems was confirmed by Fourier transform infrared spectroscopy (FT‐IR) method. Copyright © 2004 John Wiley & Sons, Ltd.     

Preparation and Hydrodesulfurization Performance of Ni-B Amorphous Alloy Catalyst Supported by APTS Modified SBA-15

采用共价接枝法制备APTS改性介孔分子筛SBA-15,将氨基官能团接枝到SBA-15表面.并采用化学还原法制备了Ni-B/SBA-15-APTS非晶态合金催化剂,以噻吩加氢脱硫为探针反应,研究了其催化加氢脱硫性能.结果表明,240℃时,APTS改性SBA-15所负载的Ni-B催化剂噻吩转化率达到50.8%,较未改性SBA-15所负载的催化剂噻吩转化率有显著地提高.由于氨基与Ni2＋的配合作用,有助于Ni在催化剂中的分散,因而更容易被还原.ICP结果表明,在相同的制备条件下,相比未改性的SBA-15,APTS改性SBA-15使其催化剂中Ni的负载量增加,并且非晶态合金组成中Ni的含量也增大,B的含量降低,有利于提高催化剂的活性.     

Fabrication and chemical surface modification of nanoporous silicon for biosensing applications

In this work, porous silicon (PS) films with varied porosity (68–82%) were formed on the p-type, boron-doped silicon wafer (100) by the electrochemical anodisation in an aqueous hydrofluoric acid and isopropyl alcohol solution at different current densities (I _d) ranging from 20–70 mA cm^?2, respectively. Biofunctionalisation of the PS surface was carried out by chemically modifying the surface of PS by the deposition of 3-aminopropyltriethoxysilane thermally leading to high density of amine groups covering the PS surface. This further promotes the immobilisation of immunoglobulin (human IgG and goat anti-human IgG binding) on to the PS surface. Formation of nanostructured PS and the attachment of antibody–antigen to its surface were characterised using photoluminescence (PL), Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy techniques, respectively. The possibility of using these structures as biosensors has been explored based on the significant changes in the PL spectra before and after exposing the PS optical structures to biomolecules. These experimental results open the possibility of developing optical biosensors based on the variation of the PL position of the PL spectra of PS-based devices.     

二氧化硅表面的APTS修饰

3-氨丙基三乙氧基硅烷(APTS)修饰的二氧化硅在生物化学、分析、催化、电子学等领域具有重要的应用前景。本文对近年来APTS修饰二氧化硅的研究进展进行了简要的概述,介绍了APTS修饰二氧化硅的典型方法和APTS修饰层的表征手段,探讨了不同修饰方法可控性及对所形成的APTS层结构及稳定性的影响。     

寡糖-8-氨基芘-1,3,6-三磺酸衍生物的毛细管电泳-激光诱导荧光分离

利用自组装的毛细管电泳-激光诱导荧光装置,研究了多种寡糖-8-氨基芘-1,3,6-三磺酸(寡糖-APTS)衍生物的分离.考察了电泳介质、浓度及pH对寡糖-APTS衍生物分离的影响,在酸性和碱性条件下,分别实现了痕量寡糖标准品及葡聚糖水解产物的高效分离