The hydrolysis mechanism of bis(2,4-di-tert-butyl)pentaerythritol diphosphite (Alkanox P24): An atmospheric pressure photoionisation mass spectrometric study

Alkanox P24 is a commercial phosphite antioxidant, well known in the literature for its excellent processing stability. As in the case of many processing phosphites, however, Alkanox P24 might undergo hydrolysis when exposed to small amounts of water. A number of products proposed recently in the hydrolytic pathway of the phosphite [Ortuoste N, Allen NS, Papanastasiou M, McMahon A, Edge M, Johnson B, et al. Polym Degrad Stab; 2006;91:195-211] are investigated in this study by atmospheric pressure ionisation-mass spectrometry (API-MS). The applicability of atmospheric pressure photoionisation (APPI) and atmospheric pressure chemical ionisation (APCI) ion sources is tested and the ion formation characteristics of Alkanox P24 are compared in both sources. In positive ion mode, ionisation of the parent phosphite occurred by protonation. In negative ion mode no pseudo-molecular ion peak was detected and the deprotonated species were more dominant in APPI. This source was employed further for the investigation of the hydrolysis products, since it exhibited lower limits of detection. High performance liquid chromatography (HPLC) with single ion monitoring (SIM) detection was used for the separation of the species formed. Hydrolysis of the phosphite proceeded via the scission of the two P-O_phenol bonds exclusively to give 2,4-di-tert-butyl phenol quantitatively as a final product.     

A liquid chromatography–atmospheric pressure photoionization tandem mass spectrometric method for the determination of azaarenes in atmospheric particulate matter

The development, optimization and validation of a liquid chromatography–atmospheric pressure photoionization tandem mass spectrometric (LC–APPI/MS/MS) method for the determination of 15 azaarenes (4-azafluorene, benzo[h] and -[f]quinoline, phenanthridine, acridine, 1-azafluoranthene, 4-azapyrene, benz[a]- and -[c]acridine, -10-azabenzo[a]pyrene, 7,9- and 7,10-dimethylbenz[c]acridine, dibenz[a,j]-, -[c,h] and [a,i]acridine) in airborne particulate matter is described. Each compound was detected and quantified operating in multiple reaction monitoring mode. Extraction of azaarenes was achieved using accelerated solvent extraction (ASE) with dichlormethane/methanol (50/50, v/v). After extraction, no additional clean-up procedure like solid phase or liquid/liquid extraction was necessary. Limits of quantification (S/N × 10) ranged from 0.2 pg/μl to 1.4 pg/μl, matrix dependent recoveries were between 57% and 94%, with relative standard deviations from 8% to 17%. Applicability of the method was demonstrated analyzing 10 samples of particulate matter (PM_2.5) collected in winter 2008. In all samples dimethylbenz[c]acridines as well as dibenzacridines were below the limit of quantification, concentration of the remaining analytes were in the range from 0.002 ng/m³ to 0.356 ng/m³.     

A critique on the structural analysis of lignins and application of novel tandem mass spectrometric strategies to determine lignin sequencing

This review is devoted to the application of MS using soft ionization methods with a special emphasis on electrospray ionization, atmospheric pressure photoionization and matrix‐assisted laser desorption/ionization MS and tandem MS (MS/MS) for the elucidation of the chemical structure of native and modified lignins. We describe and critically evaluate how these soft ionization methods have contributed to the present‐day knowledge of the structure of lignins. Herein, we will introduce new nomenclature concerning the chemical state of lignins, namely, virgin released lignins (VRLs) and processed modified lignins (PML). VRLs are obtained by liberation of lignins through degradation of vegetable matter by either chemical hydrolysis and/or enzymatic hydrolysis. PMLs are produced by subjecting the VRL to a series of further chemical transformations and purifications that are likely to alter their original chemical structures. We are proposing that native lignin polymers, present in the lignocellulosic biomass, are not made of macromolecules linked to cellulose fibres as has been frequently reported. Instead, we propose that the lignins are composed of vast series of linear related oligomers, having different lengths that are covalently linked in a criss‐cross pattern to cellulose and hemicellulose fibres forming the network of vegetal matter. Consequently, structural elucidation of VRLs, which presumably have not been purified and processed by any other type of additional chemical treatment and purification, may reflect the structure of the native lignin. In this review, we present an introduction to a MS/MS top–down concept of lignin sequencing and how this technique may be used to address the challenge of characterizing the structure of VRLs. Finally, we offer the case that although lignins have been reported to have very high or high molecular weights, they might not exist on the basis that such polymers have never been identified by the mild ionizing techniques used in modern MS. Copyright © 2015 John Wiley & Sons, Ltd.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part I

This is the part I of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS/MS) detection in LC (as opposed to the “conventional” detectors). The Part I briefly introduces the principles of operation of LC–MS (emphasizing the aspects important from the validation point of view, in particular the ionization process and ionization suppression/enhancement); reviews the main validation guideline documents and discusses in detail the following performance parameters: selectivity/specificity/identity, ruggedness/robustness, limit of detection, limit of quantification, decision limit and detection capability. With every method performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to determine it, specifically in the case of LC–MS methods.     

Atmospheric pressure photoionization coupled to porous graphitic carbon liquid chromatography for the analysis of globotriaosylceramides. Application to Fabry disease

Globotriaosylceramides (Gb(3)) are biological compounds implicated in Fabry disease, a lysosomal storage disease due to the deficient activity of alpha-D-galactosidase A, which results in an accumulation of Gb(3) in many organs. The naturally occurring samples are composed of mixtures of several molecular species differing by the structure of the alkyl chains and the nature of the sphingoid base. Atmospheric pressure photoionization mass spectrometry (APPI-MS) proved to be an efficient method for the analysis of globotriaosylceramide molecular species, both in direct injection and by coupling with liquid chromatography (LC). In the positive ion mode, in-source fragmentations yield very precious information that can be used to determine the structure of the alkyl chains. In the negative ion mode, the chloroform solvent participates to the analyte ionization by forming an adduct with chloride ions generated in situ. Combination of LC on a Porous Graphitic Carbon stationary phase and APPI-MS allowed the detection of a great number of species from biological samples isolated from Fabry patients. This method could be an interesting analytical tool for the biochemical investigation of (sphingo) lipid metabolism.     

Probing new approaches using atmospheric pressure photo ionization for the analysis of brominated flame retardants and their related degradation products by liquid chromatography-mass spectrometry

Atmospheric pressure photo ionisation has been evaluated for the analysis of brominated flame retardants and their related degradation products by LC-MS. Degradation mixtures obtained from the photochemical degradation of tetrabromobisphenol A and decabromodiphenylether were used as model systems for the assessment of the developed methodology. Negative ion mode gave best results for TBBPA and its degradation compounds. [M - H]- ions were formed without the need of using a doping agent. MS and MS/MS experiments allowed the structural identification of new TBBPA "polymeric" degradation compounds formed by attachment of TBBPA moieties and/or their respective cleavage products. In the case of polybromodiphenylethers, the positive mode provided M*+ ions and gave better results for congeners ranging from mono- to pentabromodiphenylethers whereas for higher bromination degrees, the negative ion mode (providing [M - Br + O]- ions) was best suited. Under both positive and negative ionisation modes, the use of toluene as doping agent gave better results. Liquid chromatography-mass spectrometry by means of atmospheric pressure photo-ionisation was applied to the analysis of aromatic brominated flame retardants and their degradation products. This methodology proved to be particularly useful, for the characterisation and structural identification of some compounds which are not amenable to GC-MS, especially in the case of apolar "polymeric" degradation products of tetrabromobisphenol A investigated in this work.     

The unexpected formation of [M − H]+ species during MALDI and dopant‐free APPI MS analysis of novel antineoplastic curcumin analogues

Unusual ionization behavior was observed with novel antineoplastic curcumin analogues during the positive ion mode of matrix‐assisted laser desorption ionization (MALDI) and dopant‐free atmospheric pressure photoionization (APPI). The tested compounds produced an unusual significant peak designated as [M ? H]⁺ ion along with the expected [M + H]⁺ species. In contrast, electrospray ionization, atmospheric pressure chemical ionization and the dopant‐mediated APPI (dopant‐APPI) showed only the expected [M + H]⁺ peak. The [M ? H]⁺ ion was detected with all evaluated curcumin analogues including phosphoramidates, secondary amines, amides and mixed amines/amides. Our experiments revealed that photon energy triggers the ionization of the curcumin analogues even in the absence of any ionization enhancer such as matrix, solvent or dopant. The possible mechanisms for the formation of both [M ? H]⁺ and [M + H]⁺ ions are discussed in this paper. In particular, three proposed mechanisms for the formation of [M ? H]⁺ were evaluated. The first mechanism involves the loss of H₂ from the protonated [M + H]⁺ species. The other two mechanisms include hydrogen transfer from the analyte radical cation or hydride abstraction from the neutral analyte molecule. Copyright © 2014 John Wiley & Sons, Ltd.     

High quality drug screening by capillary electrophoresis: A review

High quality assays are needed in drug discovery to reduce the high attrition rate of lead compounds during primary screening. Capillary electrophoresis (CE) represents a versatile micro-separation technique for resolution of enzyme-catalyzed reactions, including substrate(s), product(s), cofactor(s) and their stereoisomers, which is needed for reliable characterization of biomolecular interactions in free solution. This review article provides a critical overview of new advances in CE for drug screening over the past five years involving biologically relevant enzymes of therapeutic interest, including transferases, hydrolases, oxidoreductases, and isomerases. The basic principles and major configurations in CE, as well as data processing methods needed for rigorous characterization of enzyme inhibition are described. New developments in functional screening of small molecules that modulate the activity of disease-related enzymes are also discussed. Although inhibition is a widely measured response in most enzyme assays, other important outcomes of ligand interactions on protein structure/function that impact the therapeutic potential of a drug will also be highlighted, such as enzyme stabilization, activation and/or catalytic uncoupling. CE offers a selective platform for drug screening that reduces false-positives while also enabling the analysis of low amounts of complex sample mixtures with minimal sample handling.     

A Comparative Study of Pyrolysis Liquids by Slow Pyrolysis of Industrial Hemp Leaves,Hurds and Roots

This study assessed the pyrolysis liquids obtained by slow pyrolysis of industrial hemp leaves, hurds, and roots. The liquids recovered between a pyrolysis temperature of 275–350 °C, at two condensation temperatures 130 °C and 70 °C, were analyzed. Aqueous and bio-oil pyrolysis liquids were produced and analyzed by proton nuclear magnetic resonance (NMR), gas chromatography–mass spectrometry (GC-MS), and atmospheric pressure photoionization Fourier transform ion cyclotron resonance mass spectrometry (APPI FT-ICR MS). NMR revealed quantitative concentrations of the most abundant compounds in the aqueous fractions and compound groups in the oily fractions. In the aqueous fractions, the concentration range of acetic acid was 50–241 gL⁻¹, methanol 2–30 gL⁻¹, propanoic acid 5–20 gL⁻¹, and 1-hydroxybutan-2-one 2 gL⁻¹. GC-MS was used to compare the compositions of the volatile compounds and APPI FT-ICR MS was utilized to determine the most abundant higher molecular weight compounds. The different obtained pyrolysis liquids (aqueous and oily) had various volatile and nonvolatile compounds such as acetic acid, 2,6-dimethoxyphenol, 2-methoxyphenol, and cannabidiol. This study provides a detailed understanding of the chemical composition of pyrolysis liquids from different parts of the industrial hemp plant and assesses their possible economic potential.     

Production of monoclonal antibodies against hop-derived (Humulus lupulus L.) prenylflavonoids and the development of immunoassays

Monoclonal antibodies against the hop-derived prenylated chalcone xanthohumol (X) and the prenylated flavonoids isoxanthohumol (IX) and 8-prenylnaringenin (8-PN) were developed. Carboxylic acid haptens of X, IX and 8-PN were synthesized by linking a spacer to their C4′-OH group followed by subsequent coupling to bovine serum albumin (BSA) to form conjugates that were employed as immunogens in BALB/c mice to raise antibodies. The monoclonal antibodies that were secreted from the established hybridoma cell lines proved, in cross-reactivity studies, to possess highly specific binding capacities in an optimized competitive indirect ELISA. The immunoassays make use of immunogen-coated microtiterplates and a peroxidase-labeled anti-mouse IgG₁ secondary antibody with ABTS as a chromogenic substrate. For X the IC₅₀ value derived from the standard curve was 62.91 ng mL⁻¹, and for both IX and 8-PN 37.15 ng mL⁻¹. The assay was validated for the quantitative analysis of X, IX and 8-PN in urine and serum. A simple sample pretreatment procedure using a diethyl ether extraction was optimized and the recoveries and matrix effects were assessed. The validity of the established assay was tested and mean inter- and intra-assay variations in urine were 2.32% and 1.91%, respectively for X, 6.24% and 2.39%, respectively for IX and 7.18% and 0.74%, respectively for 8-PN. In serum, the mean inter- and intra-assay variations were 8.90% and 1.37%, respectively for X, 6.13% and 1.57%, respectively for IX and 6.13% and 2.43%, respectively for 8-PN. Furthermore, the method demonstrated excellent accuracy and significant correlation with measurements by an established and validated HPLC-MS method.