煤直接液化油中混合酚的分离研究

利用分子筛择形特点，对煤直接液化油中的混合酚实施高效分离。本研究选取间甲酚和对甲酚作为分离煤直接液化油馏分段混合酚的模型化合物，采用化学液相沉积法对HZSM-5吸附剂的孔口结构进行改变，分析分子筛硅铝比及颗粒粒径对模型化合物间甲酚和对甲酚吸附分离性能的影响，以获得高性能固相吸附剂，并将其应用于180-190℃馏分段混合酚分离。结果表明，当分子筛硅铝比为25、粒径为3-5 μm时，分子筛的孔口结构调节效果最优；当正硅酸乙酯的最小用量为0.2 mL/g时，固相吸附剂的吸附量为0.03 g/g，对甲酚选择性高于95%。由于外表面沉积物对吸附剂的孔口结构变化，导致对甲酚选择性的提高。进一步采用HZSM-5（1）吸附剂对真实煤直接液化油混合酚的分离中发现，苯酚和对甲酚的选择性均达到100%。     

Perturbative manifolds and the Noether generators of nth-order Poisson equations

A manifold that contains small perturbations will induce a perturbed partial differential equation. The partial differential equation that we select is the Poisson equation – in order to explore the interplay between the geometry of the manifold and the perturbations. Specifically, we show how the problem of symmetry determination, for higher-order perturbations, can be elegantly expressed via geometric conditions.     

Microstructural stability and age-hardening behavior of Re-added dual two-phase Ni3Al and Ni3V intermetallic alloys

The effect of Re addition on the microstructure and hardening behaviour of the dual two-phase Ni₃Al (L1₂) and Ni₃V (D0₂₂) intermetallic alloy was investigated by scanning electron microscopy, transmission electron microscopy and Vickers hardness test. The two-phase eutectoid microstructure accompanying the Re-rich precipitates were observed in the channel region of the alloys in which Re substituted for Ni but not in those in which Re substituted for Al and V. The concomitant addition of Nb (or Ta) with Re more stabilized the two-phase eutectoid microstructure and consequently more induced the fine precipitates in the channel region. The annealing at temperatures below the eutectoid temperature was necessary to induce the fine precipitates in the channel region and thereby result in the precipitation hardening. The fine precipitation in the channel region and related hardening was attributed to the alloying feature so that Re is soluble in the A1 (fcc) phase at high temperatures and becomes less soluble in the two intermetallic phases decomposed from the A1 phase at low temperatures.     

非线性互补问题的一种全局收敛的显式光滑Newton方法

本针对Po函数非线性互补问题，给出了一种显式光滑Newton方法，该方法将光滑参数μ进行显式迭代而不依赖于Newton方向的搜索过程，并在适当的假设条件下，证明了算法的全局收敛性。     

On the Moments of Overflow and Freed Carried Traffic for the GI/M/C/0 System

In circuit-switched networks call streams are characterized by their mean and peakedness (two-moment method). The GI/M/C/0 system is used to model a single link, where the GI-stream is determined by fitting moments appropriately. For the moments of the overflow traffic of a GI/M/C/0 system there are efficient numerical algorithms available. However, for the moments of the freed carried traffic, defined as the moments of a virtual link of infinite capacity to which the process of calls accepted by the link (carried arrival process) is virtually directed and where the virtual calls get fresh exponential i.i.d. holding times, only complex numerical algorithms are available. This is the reason why the concept of the freed carried traffic is not used. The main result of this paper is a numerically stable and efficient algorithm for computing the moments of freed carried traffic, in particular an explicit formula for its peakedness. This result offers a unified handling of both overflow and carried traffics in networks. Furthermore, some refined characteristics for the overflow and freed carried streams are derived.     

Surface structures formed by individual adsorption and coadsorption of Mn and Bi on Cu(0 0 1), studied by LEED

We have studied the individual adsorption of Mn and Bi, and their coadsorption on Cu(0 0 1) by low-energy electron diffraction (LEED). For Mn, we have determined the c(2 × 2) structure formed at 300 K, whose structure had been determined by several methods. We reconfirmed by a tensor LEED analysis that it is a substitutional structure and that a previously reported large corrugation (0.30 Å) between substitutional Mn and remaining surface Cu atoms coincides perfectly with the present value. In the individual adsorption of Bi, we have found a c(4 × 2) structure, which is formed by cooling below ∼250 K a surface prepared by Bi deposition of ∼0.25 ML coverage at 300 K where streaky half-order LEED spots appear. The c(4 × 2) structure has been determined by the tensor LEED analysis at 130 K and it is a substitutional structure. In the coadsorption, we found a c(6 × 4) structure, which has been determined by the tensor LEED analysis. It is very similar to the previously determined structure of the c(6 × 4) formed by coadsorption of Mg and Bi, and embedded MnBi₄ clusters are arranged in the top Cu layer instead of MgBi₄. Large lateral displacements of Bi atoms in the c(6 × 4)-(Mn + Bi) suggest that the Mn atoms undergo the size-enhancement caused by their large magnetic moment.     

Germanium growth on Br-terminated Si(1 0 0)

The consequences of Ge deposition on Br-terminated Si(1 0 0) were studied with scanning tunneling microscopy at ambient temperature after annealing at 650 K. One monolayer of Br was sufficient to prevent the formation of Ge huts beyond the critical thickness of 3 ML. This is possible because Br acts as a surfactant whose presence lowered the diffusivity of Ge adatoms. Hindered mobility was manifest at low coverage through the formation of short Ge chains. Further deposition resulted in the extension and connection of the Ge chains and gave rise to the buildup of incomplete layers. The deposition of 7 ML of Ge resulted in a rough surface characterized by irregularly shaped clusters. A short 800 K anneal desorbed the Br and allowed Ge atoms to reorganize into the more energetically favorable “hut” structures produced by conventional Ge overlayer growth on Si(1 0 0).     

铝互连线的电迁移问题及超深亚微米技术下的挑战

铝互连线的电迁移问题历来是微电子产业的研究热点，其面临的电迁移可靠性挑战也是芯片制造业最持久和最重要的挑战之一.从20世纪90年代开始，超深亚微米(特征尺寸≤0.18 μm)铝互连技术面临了更加复杂的电迁移可靠性问题.从电迁移理论出发，分析概括了铝互连电迁移问题的研究方法，总结了上世纪至今关于铝互连电迁移问题的主要经验；最后结合已知的结论和目前芯片制造业现状，分析了当前超深亚微米铝互连线电迁移可靠性挑战的原因和表现形式，提出了解决这些问题的总方向. 关键词： 电迁移 铝互连 微结构