锥形光纤间耦合特性的分析与检测

将通信光纤的末端拉制成锥形，利用光信号在光纤锥形区特有的传输和耦合特性，实现了光纤的耦合、连接和分束。用耦合模理论分析了锥形光纤间的传输和耦合性质，给出了光信号两锥形光纤间的耦合与两锥形光纤的距离和锥形区重叠长度等实验结果。     

A New High Efficiency Multiwave Cerenkov Generator Operating at Low Magnetic Field

With a resonant cavity inserted between the second slow-wave-structure section and the tapered wavegulde, a new structure of the multlwave Cerenkov generator (MWCG) operating at low guiding magnetic field is proposed to produce high efficiency and high power microwave. Some features and potential advantages of the proposed device are analysed. The 2.5-dimensional partlcle-in-cell simulation is employed to verify the initial expectation.The results show that, with the use of an electron beam of 640keV and 8.4kA guided by the magnetic lield of 0.6 T, a stable and monochromatic X-band microwave output of 4 GW in peak power is achieved, and the average efficiency is over 30%.     

有源光放大器链路中交叉相位调制的不稳定性

利用两种方法研究了有源放大器波分复用系统光纤链路中交叉 相位调制的不稳定性．首先利用非线性薛定谔耦合方程，在小幅度扰动下，研究了正常色散 和反常色散光纤中的交叉相位调制不稳定性. 由于相位噪声涨落，利用分裂步长傅里叶 变换法与Monte-Carlo法，模拟了有源放大器链路中反常色散和正常色散情况下的调制不稳定性. 两种方法得到的结论基本一致. 关键词： 调制不稳定性 交叉相位调制 斯托克斯带 反斯托克斯 带     

THE RELATIONSHIP BETWEEN PROJECTIVE GEOMETRIC AND RATIONAL QUADRATIC B-SPLINE CURVES

For two rational quadratic B-spline curves with same control vertexes, the cross ratio of four eollinear points are represented; which are any one of the vertexes, and the two points that the ray initialing from the vertex intersects with the corresponding segments of the twocurves, and the point the ray intersecting with the connecting line between the two neighboring vertexes. Different from rational quadratic Beeier curves, the value is generally related with the loeation of the ray, and the necessary and sufficient condition o5 the ratio being independent of the ray‘s loeation is showed. Alsn another cross ratio o5 the following four collinear points are suggested, i.e. one vertex, the points that the ray from the initlal vertex intersects respectivdy with the curve segmentt the line connecting the segments end points, and the line connecting the two neighboring vertexes. This cross ratio is concerned only whh the ray‘s location, butnot with the weights of the curve. Furthermore, the cross ratio is projective invariant under the projective transformation between the two segments.     

函数模拟法求解锥形模超塑挤压的力学场——超塑挤压解析理论之一

本文首次用模拟位移函数的方法,给出锥形模超塑挤压力学场的解析式以及应变、应变速率和应力的约束方程。由于实验选用的是典型超塑性合金ZnAl₅,所以结果有相当的包络性。即使对于非典型超塑性材料,这种方法亦有普遍意义。     

詹特切克生平简介

 威利鲍德·詹特切克(WillibaldJentschke),是位于汉堡附近的德国粒子物理实验室DESY的创立者,欧洲核研究组织(CERN)的前负责人,他过完90岁生日之后,于2002年3月11日逝世。詹特切克1911年生于维也纳,24岁获得核物理学博士学位,他在维也纳一直工作到1951年,然后他到了伊利诺斯州的恩巴拉大学,任回旋加速器实验室的负责人。1955年,当汉堡大学让詹特切克负责实验物理学研究时,他申请基金在德国建立现代的核物理研究设施。     

PURE STATE APPROACH TO $C(X)×_\alpha Z_n$

ＰＵＲＥ ＳＴＡＴＥ ＡＰＰＲＯＡＣＨ ＴＯ Ｃ（ｘ）_αＺ_nＬＩＢＩＮＧＲＥＮ；ＬＩＮＱＩＮＧ（ＩｎｓｔｉｔｕｔｅｏｆＭａｔｈｅｍａｔｉｃｓ，ＡｃａｄｅｍｉａＳｉｎｉｃａ，Ｂｅｉｊｉｎｇ１０００８０，Ｃｈｉｎａ．Ｐｒｏｊｅｃｔｓｕｐｐｏｒｔｅｄｂｙｔｈ?..     

倒置结构锥形束计算机层析的精确成像与Grangeat算法实现

研究了一种新的圆加垂直单弧段的锥顶轨迹的锥形束计算机层析（CT）的完全性条件和精确重建的Grangeat方法，提出了倒置结构锥形束计算机层析的便于实现的圆加垂直多弧段的成像结构及进行精确重建的完全性条件。利用倒置成像结构与现有成像结构之间的等价关系，给出了倒置结构锥形束计算机层析的重建算法。最后，对上述几方面进行了计算机模拟。