Numerical Calculation and Analysis of Track Etching Process

Heavy ion irradiated polymers can be chemically etched to form track membrane with pores in the micro and sub-micro ranges. It has been reported that pore growth during etching can be related to track structures. A latent track has a track core inside and a track halo surrounding the track core. By single track etching it is observed that etching in the track core is much faster than in the track halo where the etching rate is even lower tlian that of bulk material. For multi-track etching, no such stages can be seen by the conductance measurements.     

Synthesis and Magnetic Properties of Fe（Ⅱ） and Nd（Ⅲ） Complexes of Poly（N-2-thiazolylacrylamide）

N-2-Thiazolylacrylamide （NTA） was polymerized by a radical route to obtain the polymer in good yield. The polymer with a pendent heterocyclic group is soluble in common organic solvents, which allow to prepare the corresponding metal complexes with higher loads easily. FTIR, ^1H NMR, elemental analysis, and energy-dispersive X-Ray spectroscopy （EDX） were applied to characterize these materials. The magnetic behavior of Fe（Ⅱ） and Nd（Ⅲ） complexes of poly（N-2-thiazolylacrylamide） was examined by a PPMS-9T magnetometer, exhibiting the characteristics of a soft ferromagnet. It is found that the Nd（Ⅲ） complex has an extremely high relative saturation magnetization of 35 emu/g.     

Novel Poly（thienylene Ethynylene）s with Electron-accepting Groups

Since the early works of A. J. Heeger, A G. MacDiarmid and Hideki Shirakawa on semiconducting polymers, π-conjugated oligomers and polymers have been actively investigated for a variety of optoelectronic applications, such as field effect transitors (FET…     

SYNTHESIS OF SOLUBLE POLY（3,4-DIHYDROXY-o-TOLYLENE）： REDOX POLYMER

Conventional chloromethylation, paraformaldehyde/hydrogen chloride in acetic acid medium, was applied to 1,2- dimethoxybenzene. Chloroform-soluble poly（3,4-dimethoxy-o-tolylene） was obtained with an intrinsic viscosity of 0.034 dL g^-1. The polymer was evaluated as a condensation redox polymer precursor formed by a Friedel-Crafts reaction. Cleavage of the methoxy groups present in this polymer resulted in poly（3,4-dihydroxy-o-tolylene） which manifested a great air-oxidation resistance. The redox property of the latter polymer was found to be 1017 mV by potentiometric titration with 0.05 N ceric ammonium nitrate at 25℃. This midpotential was compared to that of catechol, a monomeric analogue, under the same titration conditions.     

CARRIER PHOTOGENERATION IN POLY（N-VINYL-CARBAZOLE）-BASED PHOTOCONDUCTIVE THIN-FILM DEVICES

In this paper, photoexcitation processes in the bilayer devices based on inorganic materials and poly（N-vinylcarbazole） （PVK） were investigated. In order to clarify the roles of inorganic materials in photoconductive properties of bilayer devices, TiO2 and ZnS were chosen to combine with PVK. A model for generation of photocurrent （Iph） in single layer device of PVK was obtained. It is deduced that the recombination rate constant （Pcomb） and the ionization rate constant （y） ofexcitons should be considered as the most important factors for Iph. For inorganic materials （TiO2 or ZnS）/PVK bilayer devices, in reverse bias of-4 V, the photocurrent of 115 mA/cm^2 in the TiO2/PVK device was observed, but the photocurrent in the ZnS/PVK device was only 10 mA/cma under the illumination light of 340 nm and the light intensity of 14.2 mW/cm^2. The weaker photocurrent is attributed to the absorption of ZnS within UV region and the energy offset at the interface between PVK and ZnS, which impedes the transport of charge carriers.     

Ring-closing Metathesis on an Allyl-terminated Carbosilane Dendrimer

Grubbs‘ catalyst was used to prepare a series of carbosilane dendrimers with silacyclopentene peripheral groups. It was found that ring closing metathesis reaction was influenced strongly by the reaction temperature and the amount of catalyst.     

ELASTIC BEHAVIOR OF PROTEIN-LIKE SINGLE CHAIN

The conformational properties and elastic behaviors of protein-like single chains in the process of tensile elongation were investigated by means of Monte Carlo method. The sequences of protein-like single chains contain two types of residues: hydrophobic (H) and hydrophilic (P). The average conformations and thermodynamics statistical properties of protein-like single chains with various elongation ratio λ were calculated. It was found that the mean-square end-to-end distance r increases with elongation ratio,λ. The tensor eigenvalues ratio of : decreases with elongation ratio λ for short (HP)x protein-like polymers, however, the ratio of : increases with elongation ratioλ,especially for long (H)x sequence. Average energy per bond increases with elongation ratioλ, especially for(H)x protein-like single chains. Helmholtz free energy per bond also increases with elongation ratioλ. Elastic force (f), energy contribution to force (fU) and entropy contribution to force (fs) for different protein-like single chains were also calculated.These investigations may provide some insights into elastic behaviors of proteins.     

STRUCTURE EVOLUTION OF POLYMER CHAINS FOR NECKING FORMATION IN HIGH-SPEED FIBER SPINNING PROCESS

Finite element method is used to simulate the high-speed melt spinning process,based on the equation system proposed by Doufas et al.Calculation predicts a neck-like deformation,as well as the related profiles of velocity,diameter, temperature,chain orientation,and crystallinity in the fiber spinning process.Considering combined effects on the process such as flow-induced crystallization,viscoelasticity,filament cooling,air drag,inertia,surface tension and gravity,the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions.The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated.Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed,giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.