高抗冲聚丙烯序列结构的综合表征

用高分辨＾１３Ｃ ＮＭＲ、ＦＴＩＲ等手段获得了高抗冲聚丙烯的组成和序列分布等链结构方面的信息。用ＤＳＣ、ＷＡＸＤ等方法研究了它们的结晶行为、熔融转变及晶体结构，多种方法相结合有效地表征了高抗冲聚丙烯的序列结构。     

红磷增效Al（OH）3／Mg（OH）2阻燃的聚丙烯结晶形态

借助宽角Ｘ－射线衍射、差热分析、偏光显微镜对红磷增效Ａｌ（ＯＨ）ａ和Ｍｇ（ＯＨ）２混合填充的阻燃聚丙烯体系的结晶形态进行了研究。发现这种体系中不仅出现ａ型而且还出现β型聚丙烯晶体。β型晶体可能是由于Ａｌ（ＯＨ）ａ和Ｍｇ（ＯＨ）ａ协同诱发而生成的。     

聚丙烯基纳米碳纤维复合材料结晶行为研究

采用示差扫描量热法(DSC)研究了纳米碳纤维对PP／CNF复合材料中PP结晶行为的影响。结果表明：纳米碳纤雏可提高PP的结晶温度，但略降低其结晶速率和结晶度。提高纳米碳纤雏含量或减小纳米碳纤雏直径，PP结晶行为的上述变化更为明显，但结晶速率随纳米碳纤维含量出现先减小后增大的趋势。     

丙烯单体中硫化物的CGC-PFPD分析

报道了一种聚合级丙烯中多种硫化物的GC分析方法。样品在Gas Gaspro30m×0.317mm毛细管气相色谱柱分离,按程序升温操作,以脉冲火焰光度检测器(PF PD)检测器检测,CS2作外标,用PFPD检测器的原子响应特性测定了丙烯单体中ng/kg的硫化物含量。     

IMPROVED PROPERTIES OF METALLOCENE-CATALYZED LINEAR LOW-DENSITY POLYETHYLENE/POLYPROPYLENE BLENDS DURING ULTRASONIC EXTRUSION

Metallocene-catalyzed linear low-density polyethylene/polypropylene （mLLDPE/PP） blends were prepared by ultrasonic extrusion in this work. Their extrusion processing behaviors were estimated by online measured data, such as the die pressure and flow rate. Crystallization and mechanical properties of the blends were also investigated. The results show that the addition of PP improves the processing behaviors of mLLDPE, but has little effect on its mechanical properties. On the other hand, the addition of mLLDPE improves the impact strength of PP, but has little effect on its processing behavior. The processing behaviors and mechanical properties of mLLDPE/PP blends get further improved due to the presence of ultrasonic oscillation during extrusion. Compared with PP-rich blends, the apparent viscosity drop of mLLDPE-rich blends is more sensitive to ultrasonic oscillation. The ultrasonic oscillation affects the crystal nucleation, while barely the other crystalline behaviors of the blends.     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

弹性体共混改性聚丙烯的增韧机理

阐述了以聚丙烯（ＰＰ）／高密度聚乙烯（ＨＤＰＥ）为复合基体，苯乙烯－丁二烯－苯乙烯（ＳＢＳ）为增韧剂经三元共混所得的性能优异的一类新材料．从三个层次（形貌结构转变、宏观力学响应和裂尖过程区演化）系统地探讨了其增韧机理．结果表明由形貌结构控制和对早期体膨胀变形抑制可造成裂尖平面应变区的超钝化从而达到增韧．     

关于超高分子量聚丙烯超拉伸膜的结构性能的研究——Ⅱ.形态结构变化对力学性能的影响

用X-射线衍射、动态力学测定等手段研究了不同拉伸倍数的超高分子量聚丙烯薄膜的力学性能的变化.以X-射线衍射法并基于串联力学模型的假设得到的各样品的表观晶区模量E_c~(app)约为34-38GPa.样品模量E_b随拉伸倍数增加而逐渐增大,其变化趋势与非晶区取向因子的变化相类似,说明非晶区取向是左右样品模量的重要因素.室温下,69倍拉伸样品的模量为27GPa,约为表观结晶模量的3/4,且其值在-150-160℃的温度范围内没有急剧变化,说明超拉伸明显改善了材料的力学性能及热稳定性.在各拉伸样品中,考虑伸直链结晶生成的可能性,利用并串联力学模型对伸直链结晶的体积分数做了估算,并对X-射线衍射法所得表观结晶模量进行了修正,认为室温下聚丙烯的真正晶区模量约为47GPa.     

聚丙烯纤维辐射接枝进展

本文对聚丙烯纤维的辐射接枝方法、特征和机理、以及其研究进展和表征进行了扼要综述。