8 mm回旋行波管和返波管的三折螺旋波纹波导色散分析

 三折螺旋波纹波导使TE11模和TE21模相互耦合，其色散曲线能够在宽频带内与电子回旋共振，因此需要对色散方程进行研究。提出了适合工程实用的行波模式和返波模式的色散方程，并对方程中的耦合系数进行了简化，误差在1%左右。利用CST软件的VBA语言对螺旋波纹波导进行建模和计算，根据模拟得到的传输特性曲线的特点，提出一种模拟方法，将模拟与理论计算得到的色散曲线作对比，误差在5%左右。     

Hydrodynamic Properties of Fe3O4 Kerosene-Based Ferrofluids with Narrow Particle Size Distribution

We investigate the hydrodynamic properties of Fe3O4 kerosene-based ferrofluids with narrow particle size distribution. The ferrofluids are synthesized by improving chemical coprecipitation technique. A narrow distribution of 8.6-10.8nm particle sizes is obtained from the magnetization curve with the free-form model based on the Bayesian inference theory. The fitting result is consistent with average particle size obtained from x-ray diffraction. With the increase of applied magnetic field and magnetic particle concentration, apparent viscosity of ferrofluids increases. At concentration 4.04%, the type of flow for the ferrofluid transforms from Newtonian to Bingham plastic fluid as the applied magnetic field increases.     

加权二次有理Bézier插值曲线

在本文中,给定一组有序空间数据点列及每个数据点的切矢向量,利用加权二次有理Bézier曲线对数据点作插值曲线,使该曲线具有C1连续性,并且权因子只是对相应顶点曲线附近产生影响,同调整两个相邻的权因子可以调整这两个相邻顶点之间的曲线和它的控制多边形.     

广义Sierpinski集

本文考察了包括平面上的各种广义 Cantor集 ,Sierpinski集和包括某些连续不可微曲线在内的广义 Sierpinski集 .由相似变换 ,导出了它们的级数表达式 ,并利用它和字符串空间的对应关系 ,计算出它们的Hausdorff维数     

掺杂两种荧光染料的有机红光电致发光器件

制作了掺杂rubrene和4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9,enyl)-4H-pyran(DCJTB)两种荧光染料的红光有机电致发光器件。N,N’-diphenyl-N,N’-bis(1-naphthyl)-(1,1’-biphenyl)-4,4’-diamine(NPB)和掺杂的Tri-(8-hydroxyquinoline)aluminum(Alq3)分别作为空穴和电子传输层。我们发现掺rubrene和DCJTB的器件性能与只掺DCJTB的器件性能相比有所提高。器件性能的改善是因为掺入的rubrene能够促进从Alq3到DCJTB的能量转移。根据荧光衰减曲线,计算出从Alq3到DCJTB、从Alq3到rubrene以及从rubrene到DCJTB的能量转移速率分别为1.04×109,3.89×109,2.79×109s-1。可以看出能量通过rubrene从Alq3到DCJTB的转移速率是能量直接从Alq3到DCJTB的2.7倍。     

带有给定凸切线多边形的保形五次样条逼近

本讨论带有给定切线多边形的保形逼近问题．给出了一条与给定切线多边形相切的保形五次参数祥条曲线。     

在几何和参数上表示同一条曲线的两条有理NURBS曲线的权与控制顶点之间的关系

The paper discusses the relationship between weights and control vertices of two rational NURBS curves of degree two or three with all weights larger than zero when they represent the same curve parametrically and geometrically, and gives sufficient and necessary conditions for coincidence of two rational NURBS curves in non-degeneracy case.     

增长曲线模型参数估计的加权相对效率

对增长曲线模型中参数估计的相对效率，本文提出了一种新的定义－加权相对效率，并研究了它的性质，以及在文献「４」中的两种相对效率的关系。     

双纽线｜W^2＋c｜=1的弧长

设ｓ（ｃ）为双纽线｜Ｗ＾２＋Ｃ｜＝１的弧长，ｃ∈「０，＋∞），该文讨论了ｓ（ｃ）的性质，并在ｎ＝２的情况下解决了Ｅｒｄｏｓ，Ｈｅｒｚｏｇｔ Ｐｉｒａｎｉａｎ提出的一个猜测。     

THE RELATIONSHIP BETWEEN PROJECTIVE GEOMETRIC AND RATIONAL QUADRATIC B-SPLINE CURVES

For two rational quadratic B-spline curves with same control vertexes, the cross ratio of four eollinear points are represented; which are any one of the vertexes, and the two points that the ray initialing from the vertex intersects with the corresponding segments of the twocurves, and the point the ray intersecting with the connecting line between the two neighboring vertexes. Different from rational quadratic Beeier curves, the value is generally related with the loeation of the ray, and the necessary and sufficient condition o5 the ratio being independent of the ray‘s loeation is showed. Alsn another cross ratio o5 the following four collinear points are suggested, i.e. one vertex, the points that the ray from the initlal vertex intersects respectivdy with the curve segmentt the line connecting the segments end points, and the line connecting the two neighboring vertexes. This cross ratio is concerned only whh the ray‘s location, butnot with the weights of the curve. Furthermore, the cross ratio is projective invariant under the projective transformation between the two segments.