镅污染手套箱系统的去污技术

考虑到手套箱系统的主要污染核素为^239Pu，^241Am，^3H和U，其中^239Pu，^241Am属α长寿命极毒核素，很容易产生放射性气溶胶。在手套箱系统退役过程中，手套箱系统的拆除解体前后均应采用行之有效的方法进行去污，最大限度的减少放射性物质对环境的污染。文中根据可剥离膜去污技术、电解去污技术、导电高分子聚合物导电机理以及超声波去污技术，针对镅污染手套箱拆下部件的污染情况和材质特点，采取单独使用和组合使用的方法进行相应的去污技术研究。     

Nano-tribological study on a super-hydrophobic film formed on rough aluminium substrates

A novel super-hydrophobic stearic acid (STA) film with a water contact angle of 166^o was prepared by chemical adsorption on aluminum wafer coated with polyethyleneimine (PEI) film. The micro-tribological behavior of the super-hydrophobic STA monolayer was compared with that of the polished and PEI-coated Al surfaces. The effect of relative humidity on the adhesion and friction was investigated as well. It was found that the STA monolayer showed decreased friction, while the adhesive force was greatly decreased by increasing the surface roughness of the Al wafer to reduce the contact area between the atomic force microscope (AFM) tip and the sample surface to be tested. Thus the friction and adhesion of the Al wafer was effectively decreased by generating the STA monolayer, which indicated that it could be feasible and rational to prepare a surface with good adhesion resistance and lubricity by properly controlling the surface morphology and the chemical composition. Both the adhesion and friction decreased as the relative humidity was lowered from 65% to 10%, though the decrease extent became insignificant for the STA monolayer. The project supported by the National Natural Science Foundation of China (50375151, 50323007, 10225209) and the Chinese Academy of Sciences (KJCX-SW-L2)     

Exact Solution of an Extended Hubbard Model with Electron—Lattice Interaction for an Organic Ferromagnetic Polymer

Using an exact diagonalization method,we study an extended Hubbard model with an electron-lattice interaction for an organic ferromagnetic chain with radical coupling.The result shows that the ferromagnetic ground state originates from the antiferromagnetic correlation between adjoining sites,which is enhanced by the on-site e-e repulsion.The intersite e-e repulsion induces the inhomogeneous distribution of the charge density.The dimerization is decreased by the e-e interaction and the radical coupling.The electron-lattice interaction and the radical coupling can transfer the spin density and charge density between the main chain and the radicals.     

含两个带α—H碳原子的聚合物Wittig试剂

本文以交联的氯甲基化聚苯乙烯树脂为原料,合成了四种类型的含两个带α-H碳原子的季鏻盐树脂(Ⅰ)、(Ⅱ)、(Ⅲ)、(Ⅳ),它们在碱的作用下,与醛的Wittig反应表现出不同的位置选择性:季鏻盐树脂(Ⅰ)和(Ⅳ)与醛反应只生成带烯键的聚合物;季鏻盐树脂(Ⅲ)与醛反应只生成低分子烯烃产物;而季鏻盐树脂(Ⅱ)与醛反应则生成低分子烯烃产物又生成带烯键的聚合物。     

疏水吸附法分离纯化α—淀粉酶

本文报道了一种从发酵液中分离纯化α—淀粉酶的新方法。α—淀粉酶发酵液用两种高分子量的絮凝剂澄清,滤液用一种国产吸附树脂吸附,然后用40％乙醇洗脱,所得酶粉的活性约为60000U/g。产率64.22％。     

第4届全国暨华人有机分子和聚合物发光与激光学术会议在广州召开

第4届全国有机分子和聚合物发光与激光学术会已于2005年11月7~11日在广州召开。会议由中国物理学会发光分科学会主办,华南理工大学特种功能材料及其制备新技术教育部重点实验室和华南理工大学高分子光电材料与器件研究所联合承办。本次会议的主题是:有机高分子发光与激光材料设     

聚合物复合膜的制备及吸液性能

由聚丙烯（PP）、聚乙烯（PE）制成的单层或多层微孔膜（PP，PP／PE／PP）具有良好的机械强度，且具备自关闭功能，已被广泛用作液态锂离子电池的隔膜，但PP，PP／PE／PP等微孔膜表面能低，难与塑料电极真正复合为一体，不能直接用于聚合物锂离子电池。因此在PP，PP／PE／PP等微孔膜表面涂敷一层具有黏结性质的过渡薄膜，兼顾两种材料的优点，有助于提高机械强度和将电极粘结起来的黏结力。聚合物复合膜是一种具有3层结构的复合膜，由两外层膜及中间膜组成。正丁醇不溶胀PVDF—HFP，可以丁醇为介质来测量复合膜的吸液率，该数据可作为膜孔率高低的判据，也可用于粗略判断膜电导率高低。     

超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯复合材料的输运性质

采用热压法获得了具有不同混合比例的超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯导电复合材料,并利用x射线衍射、扫描电子显微镜和标准四引线方法对复合材料的结构和低温电输运性质进行测量.实验结果显示,超导氧化物La1.85Sr0.15CuO4颗粒随机分布在聚合物本体中,相互间没有连接构成网络结构.在正常态下,复合材料的电阻-温度变化曲线给出类半导体行为.但对应于超导氧化物La1.85Sr0.15CuO4的超导转变温度Tc处,复合材料的电阻-温度变化曲线出现了极小值.室温下电阻率ρ随外加电场强度E的变化曲线测量结果表明,ρ-E曲线为一线形关系,随着电场强度E增加,电阻率ρ下降.文中对可能存在的导电机制进行分析,结果表明隧道贯穿模型可以很好地解释复合材料的导电机制.另外,外加电场强度E对复合材料的电输运特性有明显的影响.