一次消解测定蔬菜中多种重金属的简捷方法

针对一般实验室检测人员少,检测任务重的问题,研究了蔬菜通过一次湿化消解后,消解液可以测定多种重金属元素的方法,大大提高了效率,减轻了工作量.     

用湿法刻蚀技术制作衍射光学元件

研究了氢氟酸(HF)湿法刻蚀石英玻璃的化学机理，探索了针对衍射光学元件制作的刻蚀工艺，得到相关实验规律和工艺参数。最后对实验误差进行定量分析，得到湿法刻蚀的可控精度。     

水相湿法改性纳米碳酸钙表面性质的研究

用特定的表面改性剂在水相中对纳米碳酸钙的悬浮液进行了湿法改性。红外光谱和热失重分析证明,改性剂与碳酸钙之间以化学键结合;沉降体积和接触角的测定结果说明改性粒子在液体石蜡中的润湿性和疏水性得到了提高;透射电子显微镜照片显示改性粒子在液体石蜡中有更好的分散性;体系粘度实验表明改性粒子与液体石蜡之间有较好的相容性。     

利用湿法反应制备的LiV3O8的锂离子扩散特性

利用V2O5•nH2O湿凝胶和Li2CO3作原料,通过溶液反应和低温焙烧的方法合成了用于锂离子电池正极的LiV3O8.对其前驱体和产品分别进行DTA-TG、XRD表征.LiV3O8用作锂离子电池正极的电化学性能利用恒电流充放电测试进行研究.实验表明活性材料LiV3O8具有较高的充放容量和良好的循环性能.LiV3O8电极的锂离子化学扩散系数由恒电位间歇滴定技术(PITT)来确定，其值依据Li1＋xV3O8中x值的不同在10－8～10－10 cm2•s－1的变化范围内.获得的锂离子的扩散活化能为：Ea=25～42 kJ•mol－1(x=0.18～2.5).认为锂离子扩散的最大活化能是由锂离子在Li4V3O8相中的扩散决定的.     

国内冶金企业急需提高钢铁分析检测的仪器化

传统的钢铁分析检测过程，是以手工化学分析也就是人们常说的“湿法分析”方法为主。这种分析方法过程长、强度高、功能单一、稳定性差、人为误差大。     

溶剂浸渍树脂孔结构的研究

用萃取剂N_(235)浸渍大孔苯乙烯—二乙烯苯(MSD)树脂制得了溶剂浸渍树脂。用压汞仪测定了溶剂浸渍树脂的孔体积、孔表面积和孔径等,用扫描电镜观察了溶剂浸渍树脂的形貌。MSD树脂对N_(235)吸附率随该树脂的交联度和混合致孔剂用量增加而增加。由于N_(235)分布于MSD树脂孔表面,浸渍树脂的孔体积、孔表面和孔径比MSD树脂显著下降。在孔径1～100nm孔表面吸附N_(235)量最大。低交联度MSD树脂对N_(235)吸附量低,且分布不均匀。     

硫化锌掺锰/聚乙烯醇复合纳米纤维的制备与表征

利用静电纺丝法与气固反应相结合, 成功地制备了硫化锌掺锰/聚乙烯醇复合纳米纤维, 并对所制备的复合物进行了表征, 探讨了复合物的结构及其性能.     

LiMn2O4的湿法合成及锰的光度法测定研究

The LiMn₂O₄ spinel was prepared by wet method using Li₂CO₃， Mn(CH₃COO)₂·4H₂O and CO₂ as raw ma-terials. The products were measured by TG/DTA， XRD， IR. The results Showed that the sample calcined at 800℃ for 10h was well crystallized monophase product. The contents of Mn(Ⅲ) and Mn(Ⅳ) of LiMn₂O₄ spinel were determined simultaneously by spectrophotometric analysis with pyrophosphoric acid.     

STRUCTURE EVOLUTION OF POLYMER CHAINS FOR NECKING FORMATION IN HIGH-SPEED FIBER SPINNING PROCESS

Finite element method is used to simulate the high-speed melt spinning process,based on the equation system proposed by Doufas et al.Calculation predicts a neck-like deformation,as well as the related profiles of velocity,diameter, temperature,chain orientation,and crystallinity in the fiber spinning process.Considering combined effects on the process such as flow-induced crystallization,viscoelasticity,filament cooling,air drag,inertia,surface tension and gravity,the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions.The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated.Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed,giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.