Cu2O/TiO2-Bi2WO6三元复合催化剂的制备及光催化性能研究

采用水热法制备花状Bi2 WO6,并利用超声分散法制备了Cu2 O/TiO2-Bi2 WO6复合光催化剂,通过FESEM、XRD、XPS、FI-IR、UV-vis DRS和PL对光催化剂进行了分析和表征.表征结果证明:花状Bi2 WO6表面负载着碎片状的TiO2和立方体Cu2 O形成Cu2 O/TiO2-Bi2 WO6复合光催化剂;以短链脂肪酸(SCFAs)为牺牲剂,考察复合光催化剂的光催化产生氢气和烷烃的性能.实验结果表明:Cu2 O/TiO2-Bi2 WO6复合光催化剂以乙酸为牺牲剂,主要产氢气和甲烷,降解率高达91.82;;以丙酸为牺牲剂,产物主要是乙烷和丁烷,降解率高达90.70;;以丁酸为牺牲剂,除了氢气,甲烷,乙烷,丙烷,丁烷外,气体产物还含有一定量的戊烷,其降解率高达91.50;.结合反应液中间产物的成分进行检测,由此推断出光催化反应的可能机理.     

ESTIMATING EXTREME-VALUE INDEX FROM RECORDS

1.IntroductionLet{X.,n21}beasequenceoflidry'swithanondegeneratedistributionfunctionF(x).Supposethereexistsomeconstantsan>0,b.6RandsomeacERsuchthatwhereG.standsforoneoftheextremevaluedistributions:Heretheindex7ERisarealparameter(interpret(1 box)--'/ryase--"for7~0).Theestimationoftheextreme-valueindex7isveryimportantbothintheextremevaluetheoryandinpractice.Manystatistics,suchasHillestimator(forcaseac>0),PickandsestimatorandDekkers-EinmahLdeHaan'smomentestimatorwhicharebasedonafinitesample,…     

氢化丁苯共聚物结构的核磁共振波谱表征Ⅱ.微观结构的定量计算

在氢化丁苯共聚物¹³C-NMR谱脂肪碳部分谱带归属的基础上,根据各谱带的主要来源,推导出六个二单元浓度的计算公式。计算出二单元、一单元的相对含量,各结构单元的数均序列长度、嵌段含量和其它结构参数。加氢前后的¹H-和¹³C-NMR谱的组成计算结果基本一致。初步探讨了作为粘度指数改进剂的氢化丁苯共聚物微观结构与性能的关系,为合成提供了依据。     

355nm Nd∶YAG激光在H_2中的高效一级斯托克斯转换

对脉冲Nd∶YAG激光(355 nm)在H2和H2∶He-Ar混合气体中的受激拉曼散射(SRS)进行了研究。在0.5 MPa的氢气中,同时测量到从二级反斯托克斯到三级斯托克斯的多波长输出,其总转化效率达88%;而高压下只剩下一级和二级斯托克斯输出,其中二级斯托克斯最大能量转化效率达44%(对应量子效率为63%)。由于高级斯托克斯的竞争,纯氢气中一级斯托克斯的最大能量转换效率不超过43%。通过向3 MPa氢气中掺入2 MPaAr气后,很好地抑制了二级斯托克斯的产生,从而获得了能量转换效率高达71%(对应量子效率为83%)的一级斯托克斯输出。对四波混频和级联受激拉曼散射在氢气多级斯托克斯产生中的作用以及惰性气体对它们的影响进行了讨论。     

基片温度和退火对DdIn2O4薄膜光学性质和载流子浓度的影响

对射频反应性溅射Cd-In合金靶制备的透明导电CdIn2O4薄膜，研究了基片温度及沉积后在氩气流中退火对薄膜的透射、反射和吸收光谱，光学常数和载流子浓度的影响。结果表明：提高基片温度减少了薄膜的载流子浓度，退火增加了薄膜的载流子浓度。随着基片温度提高，薄膜折射率n和消光系数κ的短波峰将逐渐蓝移，而退火使其出现红移。基片温度和退火对薄膜光学常数的影响与其对薄膜载流子浓度的影响是一致的。在制备CdIn2O4这样一种对于沉积方法和沉积条件极为敏感的透明导电薄膜的沉积过程中，这一现象对于实时监控具有极为重要的意义。     

Er3+掺杂的Bi2O3-B2O3-SiO2玻璃的光谱性质

测试了Bi₂O₃-B₂O₃-SiO₂玻璃中的Er³⁺离子的吸收光谱、发射光谱、⁴I_13/2的荧光寿命、拉曼光谱,及OH^-的傅里叶红外吸收光谱。应用Judd-Ofelt理论计算了该玻璃中的Er³⁺离子的J-O参数、振子强度、⁴I_13/2能级的寿命,从而利用测得的⁴I_13/2的荧光寿命得出了⁴I_13/2能级的量子效率(15%)。由于较低量子效率可能与OH^-有关,所以计算了玻璃中的OH^-浓度,发现其浓度较高(1.66×10¹⁹cm^-1,相当于Er³⁺浓度的3倍)。应用McCumber理论和四能级模型计算了Er³⁺离子的受激发射截面和荧光发射光谱的半峰全宽,结果与通过吸收光谱计算所得基本吻合。根据透射率和折射率的关系计算了折射率,发现和测量值相差很大,说明有较大的散射,通过拉曼光谱和显微镜测试,认为是玻璃中的微小气泡造成的。     

铁铝催化体系催化丙烯酸丁酯聚合

研究了Fe(acac)3-Al(i-Bu)3-8-羟基喹啉(acac=乙酰丙酮)催化体系催化丙烯酸丁酯(BA)聚合，考察了聚合规律，用凝胶渗透色谱研究了聚合物分子量和分子量分布．动力学研究表明聚合反应对单体浓度呈一级关系，表观活化能为13．9kJ／mol．     

Dissociation and Coulomb Explosion of H2^4＋ in S^q＋ ＋H2 Collisions

We have investigated fragment emission from molecularions in H2^r collisions between S^q and H2 with incident energies of 12.5, 15.625, 18.75, 21.875, 25, 28.125, 31.25, 34.375, 37.5, 40.625, and 43.75 keV/u, respectively. The energy distributions of the fragments are measured by time-of-flight techniques. The experimental results show evidences for molecular Coulomb explosion and dissociation. A program[1] is estab-lished based on the Monte Carlo technique to simulate the time-of-flight spectrum of fragment ions with different initialkinetic energy in ion-Molecule collisions. Simulations are done for S^2 H2 collisions and compared with experimental results.     

Dissociative Chemisorption of an H2（v,j） Molecule on Rigid Ni （100） Surface： Dependence on Surface Topologies and Initial Rovibrational States of the Molecules

The H2(v,j) Ni(100) collision system has been studied to understand the effects of the surface sites and initial rovibrational states of the molecule on molecule-surface interactions, by a quasiclassical molecular dynamic simulation method. Dissociative adsorption of an H2 molecule on the rigid Ni(100) surface is investigated at topologically different three sites of the surface. Interaction between the molecule and Ni surface was described by a London-Eyring-Polani-Sato (LEPS) potential. Dissociative chemisorption probabilities of the H2(v, j) molecule on various sites of the surface are presented as a function of the translation energies between 0.001-1.0eV. The probabilities obtained at each collision site have unique behaviour. At lower collision energies, indirect processes enhance the reactivity, effects of the rotational excitations and impact sites on the reactivity are more pronounced. The results are compared with the available studies. The physical mechanisms underlying the results and quantum effects are discussed.