不同重力环境下辐射加热材料表面着火特性分析

研究外界辐射加热下，不同重力环境中热薄燃料的着火特性．探讨了重力、环境氧浓度、环境压力及外界辐射强度对着火的影响．结果表明，随着重力的变化，存在不同的着火机制．在微重力和在高的环境氧浓度中，材料的着火延迟时间变短．压力减小，着火延迟时间增大．随着辐射强度的增大，着火延迟时间变小．     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

甲醇燃料车尾气净化催化剂的研究Ⅱ.甲醇深度氧化用银催化剂上吸附物种的原位红外研究

利用原位红外技术研究了ＣＨ３ＯＨ，ＣＯ，Ｏ２等在５％Ａｇ／γＡｌ２Ｏ３上的吸附情况及ＣＨ３ＯＨ和Ｏ２共吸附时表面物种的变化．结果表明，在表面纯净的Ａｇ／γＡｌ２Ｏ３催化剂上，甲醇的解离吸附仅发生在γＡｌ２Ｏ３上；表面预吸附氧后，可大大增强Ａｇ对ＣＨ３ＯＨ的解离吸附，当吸附的［ＣＨ３Ｏ］与［Ｏ］在Ａｇ／γＡｌ２Ｏ３上相互作用时，出现吸附态甲醛、甲二氧基、甲酸根等中间物种．Ｏ２在Ａｇ／γＡｌ２Ｏ３上存在非解离吸附（Ｏ－２），在真空中较易脱附，但在氧气氛下可于１００℃时稳定存在．     

燃料电池的应用和发展

 燃料电池(fuelcells,FCs)是继火电、水电和核电之后的第四代发电技术。它是一种将储存在燃料(如氢气)和氧化剂(如氧气)中的化学能,通过电化学反应过程直接转化为电能的电化学发电装置。它是唯一同时兼备无污染、高效率、适用广、无噪声和具有连续工作和模块化的动力装置,被认为是21世纪最有发展前景的高效清洁发电技术。     

甜菜糖蜜酒精废液生产菌体蛋白饲料初探

甜菜糖蜜酒精废液含有大量的有机物，pH值低，BOD、CDO值高，直接排和会造成环境的严重污染，又损失了一些有机物，在此废液中可直接接入酵母菌，使其大量繁殖，生产出的菌体粗蛋白含量达41．7％，CDO值降低了20％以上，减轻了环境污染。     

关于温度计的几个问题

 温度计是测量温度的仪器,测量温度是通过观察随着温度变化的某种客观物理量来实现的。所选取的物理量可以是各种各样的,如固体的线度、液体的饱和气压、半导体的电阻率、被测对象的热辐射。中学物理教学中常用的温度计是玻璃液体温度计,它利用液体(测温工质)的体膨胀测量温度。但是贮存液体的玻璃泡也会膨胀,因而测温工质与玻璃的体胀系数β差别越大,温度计就越灵敏。比如水银温度计,体胀系数β=0.182×10^-3℃^-1。玻璃的体胀系数β的范围是(8～10)×10^-6℃^-1>。可见,我们使用水银温度计时,系统误差很小,测量就精确。     

慢速饮酒血液中酒精含量的数学模型

描述的是在一定时间内慢慢地匀速喝完一定数量酒的问题,并建立了相应的数学模型.同时也建立了快速饮酒的数学模型,以及证明了在各次饮酒后的某时刻酒精含量的可叠加性.     

与时俱进开拓创新--《燃料化学学报》创刊50周年

物转星移，春华秋实，创刊于1956年的《燃料化学学报》迎来了她的50周年华诞。     

精制煤液化中油加氢裂化制取喷气燃料的研究

在实验室固定床反应装置上,选用Mo-Ni-P/Si-Al工业催化剂,对精煤液化中油进行了加氢裂化制取喷气燃料的实验。考察了反应温度、空速对芳烃加氢转化及产品馏分分布的影响。通过加氢裂化,降低了油品芳烃含量,提高了喷气燃料馏分的收率。在总压为15MPa,反应温度为350—360℃,空速为0.8—1.0h~(-1)条件下,获得了芳烃含量低于10w%的低结晶点的优质喷气燃料产品。并对煤液化中油制取的喷气燃料的组成和性质进行了分析和评价。     

Phenylsulfonic Acid Functionalized Mesoporous Silica Catalyzed Transetherification of Alcohols with Dimethoxymethane

Phenylsulfonic acid functionalized mesoporous silica was synthesized by condensation of tetraethylorthosilicate with phenyltrimethoxysilane, and then sulfonation using 30% fuming sulfuric acid. The material was characterized using FT‐IR, DSC, XPS, TEM and N2 adsorption/desorption measurements. DSC revealed that sulfonic acid group of the catalyst was decomposed at 354.8°C, indicating that the catalyst exhibited high thermal stability. XPS showed that there existed three kinds of different silicon species on surface of the catalyst. The catalytic performance of the catalyst was evaluated using transetherification of alcohols with dimethoxymethane. It was found that among primary alcohols, the selectivities of the two long‐chain alcohols for n‐dedocanol and n‐tetradecyl alcohol were higher than 97.0% at the conversions of 43.6% and 65.3%, respectively, while the selectivities of the short‐chain alcohols except for n‐hexanol were less than 90.0% at the conversions of over 80.0%. Due to steric barrier, the secondary alcohols such as iso‐butanol and cyclohexanol afforded conversions of 79.4% and 60.5%, and the selectivities of the two alcohols were more than 90.0%. The sequence in conversion of the substituted phenols is as follows: p‐nitrophenol>p‐fluorophenol≥p‐bromophenol>p‐cresol>m‐cresol.