超临界流体色谱流程设计及其应用

本文设计了多功能超临界流体色谱流程,流程中包括毛细管/微填充柱SFC,GC,计算机控制温度、压力、密度及信号采集、处理,配置有超临界流体萃取池,解决了超临界流体色谱分流口易堵问题。利用该流程,将石腊、DC-200气相色谱固定相、黄油、蜂蜡、救心油、红花油等样品进行超临界流体色谱分离。     

FINITE GROUPS WHOSE AUTOMORPHISM GROUP HAS ORDER CUBEFREE

ＦＩＮＩＴＥＧＲＯＵＰＳＷＨＯＳＥＡＵＴＯＭＯＲＰＨＩＳＭＧＲＯＵＰＨＡＳＯＲＤＥＲＣＵＢＥＦＲＥＥＬＩＳＨＩＲＯＮＧＡｂｓｔｒａｃｔＬｅｔＧｄｅｎｏｔｅａｆｉｎｉｔｅｇｒｏｕｐ．Ｉｔｉｓｓｈｏｗｎｔｈａｔｉｆ｜Ａｕｔ（Ｇ）｜ｉｓｃｕｂｅｆｒｅ...     

Second-order random wave solutions for interfacial internal waves in N-layer density-stratified fluid

This paper studies the random internal wave equations describing the density interface displacements and the velocity potentials of N-layer stratified fluid contained between two rigid walls at the top and bottom. The density interface displacements and the velocity potentials were solved to the second-order by an expansion approach used by Longuet-Higgins （1963） and Dean （1979） in the study of random surface waves and by Song （2004） in the study of second- order random wave solutions for internal waves in a two-layer fluid. The obtained results indicate that the first-order solutions are a linear superposition of many wave components with different amplitudes, wave numbers and frequencies, and that the amplitudes of first-order wave components with the same wave numbers and frequencies between the adjacent density interfaces are modulated by each other. They also show that the second-order solutions consist of two parts： the first one is the first-order solutions, and the second one is the solutions of the second-order asymptotic equations, which describe the second-order nonlinear modification and the second-order wave-wave interactions not only among the wave components on same density interfaces but also among the wave components between the adjacent density interfaces. Both the first-order and second-order solutions depend on the density and depth of each layer. It is also deduced that the results of the present work include those derived by Song （2004） for second-order random wave solutions for internal waves in a two-layer fluid as a particular case.     

我国实现蓝宝石衬底氧化锌二极管室温电致发光

据《科学时报》近日报道，由中科院长春光机所、厦门大学共同承担的国家自然科学基金委员会重点项目“氧化锌基单晶薄膜材料、物性及器件研究”，日前正式通过了国家自然科学基金委信息科学部专家组的中期检查验收。该项目在国内率先获得了氧化锌同质结的电致发光，并且在国际上首次实现了蓝宝石衬底生长的氧化锌二极管室温电致发光，为今后氧化锌蓝紫外发光和激光二极管的发展奠定了实验基础。     

超临界流体触媒作用下石墨-金刚石转变

 研究了超临界流体CO₂在石墨-金刚石转变中的触媒作用。实验中，采用Ag₂O作为流体触媒的先驱材料，在7.7 GPa压力下，Ag₂O在1 200 ℃分解成Ag和O₂，O₂与石墨套管在高温高压下反应形成CO₂超临界流体。研究结果表明，在7.7 GPa和1 500 ℃以上温度条件下，石墨在CO₂流体触媒的作用下可转变为金刚石晶体，在1 500～1 700 ℃温度范围内合成出的金刚石具有完好的八面体形貌，与天然金刚石的生长特征非常相似。     

时间分辨光子计数系统的研究和应用

对由SPCM-AQR-14和MCS组成的时间分辨光子计数系统进行了研究,分析了SPCM和MCS的工作原理及主要特性.利用该系统对磷光物质和洋葱的延迟发光进行了测量,对它们的光子计数率曲线进行拟合,发现其光强衰减符合双曲线规律.     

拆边法求最短路径

本文利用局部比较法 ,在图中定义子图、无效路径、以及可去边 .利用推导的有关定理 ,拆去可去边 ,利用最短路径相同的等价性 ,达到化简图 ,从而求出最短路径     

一类潜热型功能液固两相流体的定压比热研究

应用两相流与热物理理论，严格推导出一类潜热型功能液固两相流体的定压比热计算公式．     

1+1/2对转涡轮叶排轴向间距对性能影响的研究

木文对1+1/2对转涡轮中轴向间距影响进行了初步研究。对不同轴向间距叶栅流场进行了大量时间精确模拟。研究表明,1+1/2对转涡轮高低压转叶间轴向间距成为追求高效率的制约因素,轴向间距为高压转叶喉部宽度是关键点。因此有关小轴向间距下强激波/叶排干扰的研究应该加强。     

Hydrodynamic Properties of Fe3O4 Kerosene-Based Ferrofluids with Narrow Particle Size Distribution

We investigate the hydrodynamic properties of Fe3O4 kerosene-based ferrofluids with narrow particle size distribution. The ferrofluids are synthesized by improving chemical coprecipitation technique. A narrow distribution of 8.6-10.8nm particle sizes is obtained from the magnetization curve with the free-form model based on the Bayesian inference theory. The fitting result is consistent with average particle size obtained from x-ray diffraction. With the increase of applied magnetic field and magnetic particle concentration, apparent viscosity of ferrofluids increases. At concentration 4.04%, the type of flow for the ferrofluid transforms from Newtonian to Bingham plastic fluid as the applied magnetic field increases.