A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

A Facile Synthesis of Silver-Coated Composite Particles by Swelling Surface Method

We report a facile and rapid method for fabrication of composite particles consisting of a polystyrene (PS) core and a uniform silver shell. The process involves the PS colloid surface swelling, the anchoring of silver ions and nanoparticles onto the surfaces, and the subsequent growth of metal seeds in a short period. The present approach has the advantages of simplicity and high efficiency. The TEM images show the morphology of the obtained PS core-silver shell particles, and their chemical composition and crystallinity are analysed by x-ray diffraction. To our knowledge, this is the first study based on swelling PS surface for synthesis of silver-coated PS particles and may be implemented for preparing other metal-coated PS particles.     

基于CAPPFramework的CAPP系统的开发与应用

在国家863CIMS目标产品CAPPFramework系统的基础上，研究了面向对象的信息建模技术、信息模型驱动的所见即所得工艺设计技术、工作流技术．并在此基础上进行集成化、智能化计算机辅助工艺设计(CAPP)的应用与开发，实现了工艺设计的自动化，基本达到了在信息集成基础上的工艺设计与工艺信息管理一体化的目的，对企业的CAPP实施具有一定的参考价值．     

碳纳米管阵列、捆束的三步升温工艺制备及其形貌与结构

使用结构简单的单温炉设备，通过三步升温热解二茂铁、三聚氰氨混合物方法，在二氧化硅、多晶陶瓷基底上分别合成了碳纳米管阵列、碳纳米管捆束.使用扫描电子显微镜、透射电子显微镜、电子能量损失谱和x射线光电子能谱对合成样品进行了结构和成分分析.结果显示：两种基底上合成的纳米管均为多壁纯碳管；生长于光滑二氧化硅表面的碳纳米管具有高度取向性和一致的外径，长度为10—40μm.碳纳米管采取催化剂顶端生长模式并展示出类杯状形貌；生长于粗糙多晶陶瓷表面的碳纳米管捆束随机取向，碳纳米管直径为15—80nm，长度在几百微米，展示 关键词： 碳纳米管 热解法 三步升温工艺     

TATB钝感炸药的小角X射线散射实验

在北京同步辐射装置上应用同步辐射X射线小角散射技术研究TATB样品微孔状况，分析了微孔结构参数的变化。采用不同制备工艺(机械研磨、化学合成、气流细化、全结晶、粉碎)和不同存放时间的TATB粉末样品共计7份。     

精密垫片精冲工艺有限元分析与模具设计

精密垫片零件，如图1所示，零件材料为1Cr18Ni9Ti，强度大（σb=650MPa），有一定塑性。从零件尺寸精度看，φ4mm外圆为IT7级精度，φ4mm外圆与φ2mm内孔有很高的同轴度要求，冲裁断面与零件两端面有垂直度要求，普通冲压不能达到零件精度：从工序的角度看，有冲孔和落料工序，剪切面粗糙度Ra≤3．2μm，属于光洁冲裁范畴；另外，技术条件中要求零件两大面不得有任何划伤，且光滑平整。总体上看，该零件的冲压加工性不好，难度较大，对模具的设计、选材、制造要求都较高。     

CHBr薄膜制备的初步研究

碳氢（cH）及其掺杂材料常被用作ICF实验靶丸烧蚀层材料。制备CH薄膜及其掺杂材料的方法有很多，诸如：离子束辅助沉积、离子溅射沉积、低压等离子体化学气相沉积（LPPCVD）等。近年来，详细研究了LPPCVD法制备CH薄膜的制备方法与工艺，形成了比较成熟的技术路线与工艺路线，并为“神光”实验提供了一系列实验靶丸。     

Electronic Properties of Red P-Type Tl2S5 Single Crystals

Single crystals of red Tl2S5 were prepared by a special modified vertical Bridgman and Stockbarger technique.This growth was performed in our laboratory. The influences of temperature on the electrical conductivity, Hall mobility, carrier concentration, and thermoelectric power (TEP) were carried out in the temperature range 277-413K. Throughout these measurements, various physical parameters such as effective mass of charge carriers,carrier mobility, diffusion coefficient, and the relaxation time for both majority and minority carriers were found.     

氘氚化锂分解残渣中微量氚的回收

氘作同位素交换气对除氚后的新鲜氘氚化锂残渣[主要成分是硅锂化合物和二氧化硅，渣中含氚约为0．9443mg／g(渣)]中的微量氚进行氚的计量与回收，为氘氚化锂残渣中氚的回收提供技术支持。     

QIC-160等静压机自动控制系统的设计与实现

QIC-160等静压机是20世纪80年代初引进的国外成套大型设备，主要用于粉末成型产品的压制。设备最高工作压力达200MPa，温度可达120℃。设备从引进到现在已经20多年了，电器元件也已老化，鉴于该设备现在液压系统及主体运行还基本正常，故对原设备控制系统进行了设计更新。