Advances in micro-perforated panel absorbers

Theoretical and experimental investigations on the performance of micro-perforated -panel absorbers are reviewed in this paper. By reviewing recent research work, this paper reveals a relationship between the maximum absorption coefficient and the limit of the absorption frequency bandwidth. It has been demonstrated that the absorption frequency bandwidth can be extended up to 3 or 4 octaves as the diameters of the micro-holes decrease. This has become possible with the development of the technologies for manufacturing micro-perforated panels, such as laser drilling, powder metallurgy, welded meshing and electro-etching to form micrometer order holes. In this paper, absorption characteristics of such absorbers in random fields and in high sound intensity are discussed both theoretically and experimentally. A new absorbing structure based on micro-perforated-panel absorbers demonstrate experimentally high sound absorption capability. This review shows that the micro-perforated-panel absorber has potentials to be one of ideal absorbing materials in the 21st century.     

Theoretical analysis of the acoustical characteristics of suspended micro-perforated panel absorbers

Sound absorption characteristics of suspended micro-perforated panel absorbers were investigated theoretically. The method of half thickness model of such panel absorber with quadripole analysis was used for predicting its acoustic performance. The analysis results show that the predictions agree well with the measurements of absorption in the reverberation chamber. The factors affecting the absorption characteristics for such absorbers were discussed, and some rules as design guidelines were given.     

Preparation and Selectivity of Molecularly Imprinted Polymer Coating on the Micro Pore Membrane of Polytetrafluoroethylene

In order to obtain mechanically stable membrane for practical application, the imprinted polymer was synthesized in the pores of polyfluoromembrane, the binding and transport ability of the membrane were studied.     

用数值方法分析微孔激光器出射光的近场特性

微孔激光器作为应用于近场光信息存储系统中的一种新型光源，它的出射光斑的近场特性对于近场光存储是十分重要的。针对纳米孔径运用角谱进行Fox-Li数值迭代，得到不同孔径微孔激光器的基模光强分布，然后运用二维非线性时域有限差分法分析微孔激光器出射端即微孔金属膜的近场光学性质，模拟计算了不同孔径和厚度的微孔金属膜的光强近场分布，从应用于近场光存储的角度，给出反映其近场光学特性的相关数据。发现由于TM模式下金属存在局域表面等离子增强效应，使得其出射强度比TE模式高一个数量级，从而更适于作为实际中近场光存储系统和原理试验的光学头。     

聚合物复合膜的制备及吸液性能

由聚丙烯（PP）、聚乙烯（PE）制成的单层或多层微孔膜（PP，PP／PE／PP）具有良好的机械强度，且具备自关闭功能，已被广泛用作液态锂离子电池的隔膜，但PP，PP／PE／PP等微孔膜表面能低，难与塑料电极真正复合为一体，不能直接用于聚合物锂离子电池。因此在PP，PP／PE／PP等微孔膜表面涂敷一层具有黏结性质的过渡薄膜，兼顾两种材料的优点，有助于提高机械强度和将电极粘结起来的黏结力。聚合物复合膜是一种具有3层结构的复合膜，由两外层膜及中间膜组成。正丁醇不溶胀PVDF—HFP，可以丁醇为介质来测量复合膜的吸液率，该数据可作为膜孔率高低的判据，也可用于粗略判断膜电导率高低。     

聚丙烯微孔膜的等离子体接枝聚合改性

利用拉伸时的晶型转变致孔特性,从β晶相聚丙烯经单向或双向拉伸制得了新型聚丙烯微孔膜、用等离子体接枝聚合技术接上了亲水性聚合物如聚丙烯酸、聚丙烯腈等。研究了等离子体处理时间、单体性质对得到的亲水膜的亲水性、离子/溶质渗透性的影响。发现接枝聚丙烯酸的双向拉伸膜对Na~+、Mg~(++),尿素有较大的渗透性,并具有优良的形状稳定性。     

In situ Synthesis of Oligonucleotides on Plasma Treated Polypropylene Microporous Membrane

Polypropylene microporous membranes were treated with plasma in a mixture of N2 and H2 (1:2 in volume). Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and ultra-violet (UV) spectra demonstrated the success of grafting amino groups. The density of the polar amino groups on the membrane surface is about 0.59 μmol/cm^2. The as-treated membranes were successively applied to the in situ synthesis of oligonucleotides and an average coupling yield was more than 98%. The surface feature of the treated membrane is suggested to be responsible for its advantage over a glass slide.     

聚丙烯中空纤维膜的微孔结构的控制

通过熔纺／冷拉伸法制备了微孔聚丙烯中空纤维膜。研究了工艺条件对微孔聚丙烯中空纤维膜的微孔结构与性能的影响。结果表明：随着纺丝温度的下降或熔体拉伸比的提高，最大可几孔径及孔隙率增大；熔纺中冷却风速提高，最大可几孔径及孔隙率较大；温度低于110℃时，热处理对最大可几孔径及孔隙率的影响较小，在120－130℃时，随着热处理温度的增加，最大孔径及孔隙率有明显增加的趋势；随着初纺中空纤维拉伸倍数的增加，孔隙率先增加而后下降。     

新型分子筛Ti-MMM-1的合成及其催化性能的研究

通过控制TEOS的水解，在不同时间添加与MCM-41和MFI相应的有机模板剂合成出了一种新型分子筛，Ti-MMM-1，采用XRD、FT-IR和低温N2吸附对其进行表征，并用H2O2氧化环己烷和环己醇对其催化活性进行评价．结果表明，Ti-MMM-1是一种具有MCM-41和MFI结构的两相混合的微孔／介孔材料，IR分析表明钛原子已进入分子筛骨架，并在环己烷和环己醇的氧化中表现出较好的催化活性和较高的选择性．     

一种含有亚微米孔洞的新型微孔磷酸盐晶体材料的合成及其生长机理

采用水热法成功地合成了一种含有亚微米级孔洞的微孔磷酸盐晶体材料(记为HAP-TAP),其形貌特征是:六棱柱形的晶体表面分布着大量0.4～0.8μm的亚微米级孔洞,孔洞内长有片层状晶体.在样品晶化的过程中,通过控制合成时间,获得了纯六棱柱形晶体的大单晶(记为HAP).使用扫描电子显微镜(SEM)、粉末X射线衍射(XRD)、红外光谱和电子能谱(EDX)对HAP-TAP独特形貌的形成机理进行了研究和揭示.HAP的单晶XRD数据表明,HAP是一种具有二维空旷骨架结构的新型微孔磷酸铝晶体,其分子式为Al5(OH)2(PO4)7(C2N2H10)3.0.5H2O.EDX分析结果表明,生长于六棱柱形晶体孔洞内的片层状晶体为磷酸钛铝材料.