离心力场作用下多孔介质中强制对流换热的研究

对离心流化床中空气通过多孔物料层的强制对流换热进行了理论和实验研究。获得了气流和物料间强制对流换热的准则关联式。研究结果表明,在气流速度和温度梯度方向一致的条件下,强制对流换热比通常的边界层强制对流换热有所强化,其换热的准则关联式具有 Nu=CRePr的线性形式。从而验证了改变气流方向和热流密度矢量之间夹角可以强化换热的这一强化传热新原理。     

超轻多孔金属的进展与物理学

简述了超轻多孔金属的结构、性能,研究从材料范畴发展为物理学范畴.发展的新趋势为,将国家高技术目标需求与科学前沿相结合,将认识与实践相结合.     

A New Method for the Analysis of Relative Permeability in Porous Media

By combining three-dimensional digital microtomography techniques with the lattice Boltzmann method,a new methodology is used to analyse the relative permeability of multiphase flow in porous media.The results indicate that the two coupling coefficients K12 and K21 have the same magnitude,therefore the Onsager reciprocity still holds,the results also agree well with the results of pipe flow numerical experiments.     

化整为零:聚合物/粘土纳米复合材料的微观结构和阻隔性能

在聚合物基体中掺入少量的层状硅酸盐所制备的聚合物／粘土纳米复合材料，其阻隔性能明显地优于纯聚合物及其传统的复合材料。实验及分析结果表明，聚合物／粘土纳米复合材料的微观结构和阻隔性能主要受控于粘土剥离后的径厚比．一简单的重整化群模型被用来评估粘土几何因素（诸如径厚比、取向、剥离程度等）对聚合物／粘土纳米复合材料阻隔性能的影响，所得到的逾渗阈值及最佳粘土含量与实验结果吻合。     

掺钕聚甲基丙烯酸甲酯的光学特性

研究了制备的掺钕螯合物Nd(DBM)3Phen材料的吸收光谱、激发光谱、荧光光谱,应用Judd-Ofelt理论计算了该材料的强度参量．分析了钕离子激发态4F3／2的辐射寿命(631 μs)和4F3／2→4IJ′跃迁的受激发射截面和荧光分支比．     

镅污染手套箱系统的去污技术

考虑到手套箱系统的主要污染核素为^239Pu，^241Am，^3H和U，其中^239Pu，^241Am属α长寿命极毒核素，很容易产生放射性气溶胶。在手套箱系统退役过程中，手套箱系统的拆除解体前后均应采用行之有效的方法进行去污，最大限度的减少放射性物质对环境的污染。文中根据可剥离膜去污技术、电解去污技术、导电高分子聚合物导电机理以及超声波去污技术，针对镅污染手套箱拆下部件的污染情况和材质特点，采取单独使用和组合使用的方法进行相应的去污技术研究。     

Fabrication of Dendrimer－like PAMAM Based on Silica Nanoparticles

A G 4.0 dendrimer-like poly (amido amine) (PAMAM) based on silica nanoparticles was fabricated via a divergent approach.It was built from γ-aminopropyi silica nanoparfides (APSN) core via repetitive addition of acrylate (MA) and hexylenediamine (HDA). FT-IR and EA were used to monitor the progress of dendrimer during each step. The amino group content of the resulting product increased from 0.49 to 3.72 mmol/g after the 4th generation. In addition, the percentage of grafting increased with increasing generation and reached to 65.9% after 4th generation. It was found that the resulting silica nanoparticles could be dispersed in methanol with a mean hydrodynamic particle diameter of 152.7 nm although the silica nanoparticles had agglomerated during the storage period.     

强场物理与快点火靶的制备

采用本体聚合技术合成全氘代聚苯乙烯（DPS），所得聚合物分子量约250000，分散度约3，氘代率为98．7％。采用热诱导相分离技术制备全氘代聚苯乙烯泡沫。在室温溶解DPS于溶剂中，然后转入轴向冷却模具，进行单向冷却，直到溶剂完全冷冻，最后取出冷冻样置于冷冻干燥仪中进行冷冻干燥，待溶剂完全脱出后即得泡沫。通过对二恶烷／环己烷混合溶剂相图，以及PS一混合溶剂体系的相图的测定，     

Fractal Character for Tortuous Streamtubes in Porous Media

An analytical model for fractal dimension of tortuous streamtubes in porous media is derived. The proposed fractal dimension for tortuous streamtubes in porous media is expressed as a function of porosity and scale, and there is no empirical constant in the proposed expression. The model predictions for the fractal dimension of tortuous streamtubes in porous media are in good agreement with those by the box-counting method and with the observations of other researchers.     

Preparation and Selectivity of Molecularly Imprinted Polymer Coating on the Micro Pore Membrane of Polytetrafluoroethylene

In order to obtain mechanically stable membrane for practical application, the imprinted polymer was synthesized in the pores of polyfluoromembrane, the binding and transport ability of the membrane were studied.