RPS增容LDPE／PS研究

用ＨＡＡＫＥ、ＤＳＣ、ＩＲ等方法研究了侧基含有过氧键的反聚苯乙烯与ＬＤＰＥ之间的反应，并将其应用到ＬＤＰＥ／ＰＳ共混体系。考察了不同添加方式，交联助剂等对共混物力学性能、流变性能及微观结构的影响。     

小阶跃反应性输入时点堆中子动力学方程的解析解

对小阶跃反应性输入（0<ρ,０<β）且有温度反馈时点堆中子动力学方程进行了研究. 导出任意初始功率条件下核反应堆功率、反应性与时间的解析表达式. 分析和讨论了初始功率与输入小阶跃反应性的大小对功率、反应性变化规律的影响，得到了一些新的结果. 关键词： 中子动力学 反应性 点堆 温度反馈     

聚丙烯/POE共混组成对材料断裂行为的影响

采用基本断裂功(EWF)方法对聚丙烯(PP)/聚烯烃弹性体(POE)共混物的注射双边缺口拉伸试样的断裂行为进行了研究,比较了不同POE含量对共混物各断裂参数的影响.结果表明,PP和用量为5phr POE的共混物都可完全满足EWF方法的要求,共混物的断裂韧性-比基本断裂功we,较PP有显著提高;POE用量为10phr以上的共混物则出现明显的成颈现象而限制了EWF方法的应用;PP和各种POE用量的共混物都得到了其屈服所需要的比基本断裂功we,y和比塑性功β′wp,y.     

界面作用对HDPE/POEg/CaCO_3三元复合材料韧性的影响

通过界面改性,制备了以CaCO3为核,马来酸酐接枝乙烯-辛烯共聚物弹性体(POEg)为壳的高密度聚乙烯(HDPEg)/弹性体(POE)/CaCO3的三元复合材料.由于“核-壳”结构的形成,弹性体和CaCO3表现出协同的增韧作用.同未经表面处理的CaCO3复合材料相比,在相同的CaCO3含量的情况下,表面处理的CaCO3由于与弹性体形成更强的界面粘结,使得三元复合材料的“脆-韧”转变发生在较低的弹性体含量.     

Design and Theoretical Study of Nickel Catalysts for Syndiotactic Polyolefins

A nickel catalyst was nodeled with ligand L^2,[NH=CH-CH=CH-0]^-,which should have potential use as a syndiotactic plyolefin catalyst,and the reaction mechanism was studied by theoretical calculations using the density functinal method at the B3LYP/LANL2MB level.The mechanism involves the formation of the intermediate [NiL^2Me]^ ,in which the metal occupies a T-shaped geometry.This intermediate has two possible structures with the methyl group trans either to the oxygen or to the nitrogen atom of L^2.The results show that both structures can lead to the desired product via similar reaction paths,A and B.Thus,the polymerization could be considered as taking place either with the alkyl group occupying the position trans to the Ni-0 or trans to the Ni-N bond in the catalyst.The polymerization process thus favors the catalysis of syndiotactic polyolefins.The syndiotactic synthesis effects could also be enhanced by varations in the ligand substituents.From energy considerations,we can conclude that it is more favorable for the methyl ttrans-O position to form a complex than to occupy the trans-N position.From bond length considerations,it is also more favoured for ethene to occupy the trans-O position than to occupy the trans-N position.     

用TREF方法分离聚烯烃共混物

用ＴＲＥＦ方法分离聚烯烃共混物徐君庭，封麟先，杨士林（浙江大学高分子科学与工程学系，杭州，３１００２７）关键词升温淋洗分级，聚烯烃，共混物升温淋洗分级（ＴＲＥＦ）方法是８０年代发展起来的，它按结晶度将聚合物分级［１］，目前主要用于聚烯烃的分级［２，３...     

聚烯烃（聚乙烯）低温热氧化与降解

综述了近年来聚烯烃特别是聚乙烯的低温热氧化机理，动力学以及氧化降解研究现状及发展，指出现今低温热氧化与降解研究意义。     

Effect of Addition of Base on Ceria and Reactivity of CuO/CeO2 Catalysts for Low-Temperature CO Oxidation

In this work, we have reported the influence of the addition of base (KOH) on the physicochemical property of ceria synthesized by alcohothermal process, and the alcohothermal mechanism was also put forward. Furthermore, the prepared CeO2 was used as the support to prepare CuO/CeO2 catalysts via the wet impregnation method. The samples were characterized by N2 adsorption-desorption, X-ray powder diffraction (XRD), high resolution transmission electron microscopy (HRTEM), and temperature-programmed reduction by H2 (H2-TPR). The catalytic properties of the CuO/CeO2 catalysts for low-temperature CO oxidation were studied using a microreactor-GC system. The crystal size of CeO2-A was much smaller than that of CeO2-B, and the corresponding copper oxide catalysts exhibited higher catalytic activity than that of the CeO2-B-supported catalysts under the same reaction conditions. The alcohothermal mechanism indicated that KOH plays a key role in determining the physicochemical and catalytic properties of ceria-based materials.     

马来酸酐与聚烯烃接枝产物的表征

综述了马来酸酐与聚烯烃接枝产物的多种表征手段，重点分析了纯化处理，化学滴定以及红外分析方法的表征原理，应用和改进方法。     

密胺树脂/硼酸锌双层包覆微胶囊化红磷的制备及其在阻燃聚烯烃中的应用

描述了采用密胺树脂和硼酸锌连续双层包覆微胶囊化红磷(MRP)的最新制备方法。采用红外光谱、电子能谱和透射电镜等分析手段对其进行了表征，并证实红磷已被完全包覆。实验数据表明：经包覆的MRP的热稳定性获得了明显改善，吸水率和磷化氢的发生量均大大减少。MRP作为阻燃助剂应用于聚烯烃阻燃材料表现出了良好的阻燃效果。实时红外和热失重测量以及扫描电镜观察表明：其阻燃机制是红磷受热时与树脂反应促进了含磷膨胀炭层的形成，从而提高了材料的热稳定性，碳层起到了隔氧、隔热作用，而且主要在凝聚相中发挥其阻燃作用。