排序方式: 共有62条查询结果,搜索用时 15 毫秒
1.
硼酸酯偶联剂的合成与表征 总被引:11,自引:0,他引:11
通过分子结构设计,合成了一种氮一硼内配位结构的硼酸酯偶联剂,解决了硼酸酯水解稳定性差的问题,同时分子结构中含有氨基、丁氧基等活性基团。用傅立叶变换红外光谱对硼酸酯进行了结构表征,讨论了原料配比、合成工艺等对硼酸酯收率及反应速率的影响,并通过实验确定了最佳配方及工艺。对硼酸酯的物理性能、溶解性、水解稳定性及对硼酸铝晶须的表面处理效果进行了表征。结果表明:合成的硼酸酯偶联剂由于具有氮-硼内配位作用,表现出优良的水解稳定性,并且硼酸酯偶联剂对硼酸铝晶须具有良好的表面改性效果。 相似文献
2.
3.
4.
5.
Yong Wang Zheng-bao He Zuo-wan Zhou 《高分子科学》2007,(6):565-572
The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites. 相似文献
6.
CaCO3/PEEK复合体系的力学行为和热行为研究 总被引:7,自引:0,他引:7
以聚醚醚酮和碳酸钙复合体系为研究对象,考察了偶联剂和填料添加量对复合材料力学行为和热行为的影响.发现磺化聚醚醚酮作为偶联剂能有效地改善材料的力学性能,提高基体树脂的玻璃化转变温度,降低基体树脂的熔点,有助于改善聚醚醚酮的加工条件 相似文献
7.
研究了偶联剂改性的廉价填料级γ-Al_2O_3直接催化偏三甲苯(TMB)氧化为2,3,5-三甲基苯醌(TMBQ)性能的影响。结果表明,γ-(2,3-环氧丙基)丙基三甲氧基硅烷(KH560)改性后的填料γ-Al_2O_3催化氧化活性较高。考察了KH560用量、水解时间、吸附时间及吸附温度对催化效果的影响。在优化条件下(2mL KH560/Et OH溶液(体积比1∶25),水解1h,吸附4h,吸附温度50℃),偶联剂对填料γ-Al_2O_3表面产生一定的包覆,在催化氧化TMB时较温和,副反应较少,TMB转化率和TMBQ选择性分别为14.3%和72.4%。 相似文献
8.
9.
10.
研究了稀土偶联剂 (ReC)对Mg(OH) 2 的表面改性作用及PP/Mg(OH) 2 体系的燃烧性能、流动性能、力学性能及老化性能。稀土偶联剂可显著改善Mg(OH) 2 在非极性介质中的分散性 ;PP/Mg(OH) 2 体系当Mg(OH) 2 填充量超过 5 0 %时 ,氧指数 (OI)≥ 2 8.5 ,但这时冲击强度不足纯PP的 30 % ,熔体流动速率 (MFR)低于 0 .6g/1 0min ;而填料用 2 .5 % (质量 )ReC处理后 ,填充量为 5 0 %的体系冲击强度接近纯PP ,MFR达 2 .8g/1 0min ;Mg(OH) 2对体系光氧老化过程有加速作用 ,而对热氧老化过程有阻滞作用 ;稀土偶联剂对体系光氧老化过程有轻微的促进作用 ,而对热氧老化过程无明显影响 相似文献