Light-induced cis/trans isomerization of cis-[Pd(L-S,O)2] and cis-[Pt(L-S,O)2] complexes of chelating N,N-dialkyl-N′-acylthioureas: key to the formation and isolation of trans isomers

Irradiation cis-[M(Lⁿ-S,O)₂] complexes (M = Pt^II, Pd^II) derived from N,N-dialkyl-N′-benzoylthioureas (HLⁿ) with various sources of intense visible polychromatic or monochromatic light with λ < 500 nm leads to light-induced cis?→?trans isomerization in organic solvents. In all cases, white light derived from several sources or monochromatic blue-violet laser 405 nm light, efficiently results in substantial amounts of the trans isomer appearing in solution, as shown by ¹H NMR and/or reversed-phase HPLC separation in dilute solutions at room temperature. The extent and relative rates of cis/trans isomerization induced by in situ laser light (λ = 405 nm) of cis-[Pd(L²-S,O)₂] was directly monitored by ¹H NMR and ¹⁹⁵Pt NMR spectroscopy of selected cis-[Pt(L-S,O)₂] compounds in chloroform-d; both with and without light irradiation allows the δ(¹⁹⁵Pt) chemical shifts cis/trans isomer pairs to be recorded. The cis/trans isomers appear to be in a photo-thermal equilibrium between the thermodynamically favored cis isomer and its trans counterpart. In the dark, the trans isomer reverts back to the cis complex in what is probably a thermal process. The light-induced cis/trans process is the key to preparing and isolating the rare trans complexes which cannot be prepared by conventional synthesis as confirmed by the first example of trans-[Pd(L-S,O)₂] characterized by single-crystal X-ray diffraction, deliberately prepared after photo-induced isomerization in acetonitrile solution.     

STRUCTURE, MOLECULAR WEIGHT AND BIOACTIVITIES OF (1→3)-β-D- GLUCANS AND ITS SULFATED DERIVATIVES FROM FOUR KINDS OF LENTINUS EDODES

Lentinan samples, (1→3)-β-D-glucans containing 4.6-15.2 wt% proteins, coded as L-I1, L-I2, L-I3 and L-I4 (L-I)were isolated from four kinds of Lentinus edodes. These glucans were treated with acetone to remove the protein in order to obtain free protein glucans coded as LNP-I1, LNP-I2, LNP-I3 and LNP-I4 (LNP-I). The free-protein polysaccharides were sulfated to give derivatives (S-LNP-I) with degree of substitution (DS) from 0.4-0.8. The structural features and weight- average molecular weight (Mw) of the samples were investigated by using infrared spectroscopy, elemental analysis,13C-NMR, size exclusion chromatography combined with laser light scattering (SEC-LLS) and viscometry. The effects of structure and conformation of the polysaccharides on antitumor activities were assayed in vivo (Sarcoma 180 solid tumors)and in vitro (Sarcoma 180, HL-60, MCF-7 and Vero tumors). The results indicated that the predominant species of the samples L-I and LNP-I in 0.2 mol/L NaCl aqueous solution existed as triple-helical chains with high rigidity and in dimethyl sulfoxide (DMSO) as single-flexible chains. Interestingly, the antitumor activities of LNP-I are lower than those of the native glucans (L-I), whereas their sulfated derivatives have higher inhibition ratio against Sarcoma 180 than LNP-I. The results reveal that the binding of protein, sulfated modification and the triple helix conformation are important factors in the enhancement of the antitumor activities of polysaccharides on the whole.     

High Resolution Crossed Beams Scattering Study of the F＋HD→DF＋H Reaction

Crossed beams scattering study was carried out on the F＋HD→DF＋H reaction using high- resolution H-atom Rydberg tagging time-of-flight technique. Vibrational state-resolved differential cross sections were measured, with partial rotational state resolution, at eight collision energies in the range of 2.51-5.60 kJ/mol. Experimental results indicated that the product angular distributions are predominantly backward scattered. As the collision energy increases, the backward scattered peak becomes broader gradually. Dependence of product vibration branching ratios on the collision energy was also determined. The experimental results show that the DF products are highly inverted in the vibrational state distribution and the DF （v＇=3） product is the most populated state. Furthermore, the DF （v＇=l） product has also been observed at collision energy above 3.97 kJ/mol.     

保护的二糖半乳吡喃糖基(α1→2)葡萄吡喃糖苷的合成

建立了一种新的保护的二糖半乳吡喃糖基(α1→2)葡萄吡喃糖苷的合成方法.甲基-4,6-O-苄叉基-β-D-葡萄吡喃糖苷(1)经区域选择性地苯甲酰化,得到受体甲基-3-O-苯甲酰基-4,6-O-苄叉基-β-D-葡萄吡喃糖苷(2).该受体与供体异丙基-2-O-苯甲酰基-3-O-烯丙基-4,6-O-苄叉基-β-D-1-硫代半...     

An organoantimony nitrate complex with azastibocine framework as water tolerant Lewis acid catalyst for the synthesis of 1,2-disubstitued benzimidazoles

A novel organoantimony complex of 6-cyclohexyl-6,7-dihydrodibenzo[c,f] [1,5]azastibocin-12(5H)-yl nitrate ( 2 ) was synthesized and systematically characterized by techniques such as NMR spectra, TG-DSC, and X-ray diffraction. It was found that the complex 2 exhibits relatively strong Lewis acidity (3.3 < Ho ≤ 4.8) and could be employed as a water tolerant Lewis acid catalyst for the synthesis of synthetically valuable benzimidazole derivatives starting from aldehydes and arylenediamines. This catalytic system shows excellent tolerance toward a wide variety of functional groups, such as methyl, methoxyl, fluoro, chloro, bromo, nitro, cyan, trifluoromethyl, 1-naphthaldehyde, furfural and n-butyl, together with facile reusability in 5 times scale enlarged synthesis.     

The charge states’ conversion of the activator ions in CaF2:Eu nanophosphors

According to stationary X-ray-excited luminescence spectra and thermally stimulated luminescence spectra of CaF₂:Eu nanophosphors, it was found that Eu³⁺?→?Eu²⁺ conversion can occur during thermal annealing of fine-grained (d?=?25?nm) nanoparticles in the 200–800°C range, which is accompanied by an increase in their size within 40–189?nm. An important role of the exciton mechanism of Eu²⁺ luminescence excitation was revealed according to the temperature dependence of X-ray-excited luminescence spectra of CaF₂:Eu nanoparticles of 114?nm size. The maximum of the X-ray-excited luminescence light output of CaF₂:Eu nanophosphors in the Eu²⁺ ions’ emission band was traced out at 400–500°C annealing temperature and at the size of nanoparticles of 114–180?nm. The subsequent growth of the annealing temperatures, particularly in the 800–1000°C range, causes the reduction of X-ray-excited luminescence light output because of the increment of lattice defects’ concentration due to a sharp increase in the size of nanoparticles and their agglomeration.     

Can contributions to B_s→l＋l-γ from the magnetic-penguin operator with real photons in the standard model be neglected？

Using the Bs meson wave function extracted from non-leptonic Bs decays, we reevaluate the rare decays Bs→l＋l- γ,（l=e,μ） in the Standard Model, including two kinds of contributions from the magnetic-penguin operator with virtual and real photons. We find that contributions to the exclusive decays from the magnetic-penguin operator b→sγ with real photons, which were regarded as negligible in the previous literature, are large and the branching ratios Bs→l＋l-γ are enhanced by a factor of almost 2. With the predicted branching ratios of the order of 10-8, it is expected that these radiative dileptonic decays will be detected in LHC-b and B factories in the near future.     

Direct Resinification of Two (1→3)-β-D-Glucans,Curdlan and Paramylon,via Hot-Press Compression Molding

Abstract

Hot-press compression molding was attempted to resinify two renewable source-derived linear (1→3)-β-D-glucan polymers, i.e., paramylon or curdlan via the generation of reactive aldehyde groups that tend to crosslink with hydroxyl groups of the glucans. As for the paramylon, the optimal molding temperature was found to be around 220?°C, keeping the pressure at 20?MPa for 3?min, due to its highly crystalline structure. On the other hand, the curdlan resin was producible in the temperature range of 180–240?°C at the same pressure and pressing time. Dynamic mechanical analysis revealed a large temperature dependence of the loss modulus, E’’, for the paramylon-based polymer resin whereas the semi-crystalline curdlan resin was stable in terms of both the storage and loss moduli, E’ and E’’, up to 160?°C. The vaporization of the water formed during the molding, due to the thermal decomposition, and the adsorption of moisture due to the hydrophilic property of the paramylon affected the thermal stability. The curdlan resin exhibited flexural strength and modulus extremely superior to those of regenerated and esterified curdlan films, and even a little superior to those of polyamide-12. The strain at break was comparable to the yield strain of an epoxy resin. On the other hand, the paramylon-based polymer resin was producible, but the resinification property and thermal stability of the paramylon resin was inferior to the curdlan resin due to the former’s highly crystalline structure.     

The stir-frying can reduce hepatorenal toxicity of Fructus Tribuli by inactivating β-glucosidase and inhibiting the conversion of furostanol saponins to spirostanol saponins

The purpose of this study was to illustrate the mechanism of “enzyme inactivation and toxicity reduction” of Fructus Tribuli (FT) after being heating processed. Ultra-high performance liquid chromatography coupled with triple quadrupole tandem mass spectrometry (UHPLC-MS/MS) was used to quantitatively analyze the contents of four steroidal saponins in crude Fructus Tribuli (CFT) and stir-fried Fructus Tribuli (SFT) under different storage times at room temperature. The enzyme activity of β-D-glucosidase in CFT and SFT were determined and calculated by ultraviolet–visible spectrometry (UV-VIS spectrometry). In addition, the enzyme hydrolysates of FOT and tribuluside A were qualitatively analyzed by ultra-high-performance liquid chromatography coupled with quadruple-time-of-flight mass spectrometry (UHPLC-Q-TOF/MS). The hepatorenal toxicity of spirostanol saponins in FT were further confirmed by in vivo and in vitro experiment. This study confirmed that “enzyme inactivation and toxicity reduction” was one of the reasons why the stir-frying can reduce hepatorenal toxicity of FT, and further enriched the exploration on the mechanism of processing toxicity reduction.     

Synthesis of Epoxyalkyl (1→3)‐β‐D‐Oligoglucosides

Abstract

We describe an approach for the synthesis of (1→3)‐β‐D‐oligosaccharide derivatives 10–18. 1–9 were synthesized by treating peracetylated (1→3)‐β‐D‐oligosaccharides with the corresponding alkenyl alcohols and Lewis acid (SnCl₄) catalyst. Epoxidation of the corresponding alkenyl oligoglucosides took place by m‐CPBA. NaOMe in dry methanol was used for the deacetylation of the blocked derivatives, to give 10–18 in overall yields of 25–32%.