Multifunctional fibrous wound dressings for refractory wound healing

Refractory wounds have always been an important issue to healthcare systems, whose healing process is always delayed by multiple factors, including bacterial infections, chronic inflammation, and excessive exudates, etc. Employing multifunctional wound dressings is recognized as an effective strategy to deal with refractory wounds, which has yielded promising outcomes in recent years. Among these advanced wound dressings, fibrous dressings have gained growing attention due to their unique merits. Such wound dressings have demonstrated great potential in delivering theranostic agents, such as antibacterial agents, anti-inflammatory drugs, growth factors, and diagnostic probes, etc., for the purposes of accelerating wound healing. This paper reviews the development of multifunctional fibrous dressings and their applications in treating refractory wounds. The construction approaches of novel fibrous dressing with capabilities of antibacterial, anti-inflammation, exudate management and diagnosis were also introduced. Furthermore, the existing problems and challenges are also discussed briefly.     

Photoelectrochemical oxygen atom transfer enabling efficient selective oxygenation

Photoelectrochemical(PEC)technique represents a promising approach to chemical transformation by harvesting sustainable solar energy.Despite the wide applications of PEC systems such as environmental remediation and solar energy conversion,the reported PEC reactions are dominated by the radical-based processes that are initiated by the single electron transfer between photo-induced carriers and adsorbed species on photoelectrode surface[1,2].For instance,hydroxyl radicals are often involved in the PEC oxidation reactions.As well known,it is a grand challenge to control the formation and evolution rates of radicals,which inevitably leads to the unsatisfactory product selectivity of PEC reactions.Naturally,such a circumstance brings about a question to the research community whether a different mechanism can be established to sustain efficient and selective oxygenation.Recently,based on their previous findings on PEC water oxidation[3,4],Zhao and coworkers[5]reported that many substrates can be oxidized in an oxygen atom transfer(OAT)pathway,a non-radical two electron process,to oxygenated products byα-Fe2O3 photoanodes.     

共享自动驾驶汽车使用意愿模型及其影响因素

为了构建共享自动驾驶汽车(shared autonomous vehicles，SAV) 的使用意愿模型并分析其影响因素，通过使用时机和使用频率来体现公众对SAV的使用意愿；采用验证性因子分析将态度潜变量转化为潜变量得分，以此将态度潜变量引入传统的有序Logit模型；提出SAV使用意愿的有序Logit模型构建方法，并建立基于个人属性、通勤特征、态度潜变量的SAV使用意愿模型.研究发现:是否使用过滴滴拼车、工作单位停车费、自动驾驶态度对使用时机和3种价格(1，2，3元/km) 下的使用频率有显著影响；使用过滴滴拼车、工作单位收取停车费、支持自动驾驶的群体倾向于频繁地、更早地使用SAV出行；公众期望以1元/km或 2元/km即不超过目前滴滴拼车的价格使用SAV.     

锂电池异常状态监测的FEKF方法研究

为了保障锂离子电池的使用安全，提出了基于带渐消因子的扩展卡尔曼滤波 （Fading Extended Kalman Filter，FEKF）的电池状态在线监测方法. 建立锂电池一阶等效电路模型，利用递推最小二乘法进行锂电池状态参数在线辨识，建立状态方程；引入最优渐消因子，构造FEKF，得到端电压残差；使用端电压残差序列构造χ2分布的诊断函数，计算误检率与状态参数异常阈值. 实验结果显示利用FEKF生成的残差能更早对异常状态进行告警，证明FEKF能够显著提高χ2检验对锂电池内部缓变型异常状态判断的准确率.     

基于单片机的芳纶被复线巡检系统研究

为便于芳纶被复线加工时双绞配盘和成卷质量检测,提高原材料利用率和检测精度,以束丝、绝缘挤塑、双绞和成卷四道工序为基础,设计了一种便捷实用型巡检系统,推导了双绞前绝缘单线测长和成卷后断点测长原理及其计算公式,设计了以51单片机为控制核心、测量单元与人机界面为外接模块的硬件电路总体方案,依托Keil5软件开发环境、编程C语言主程序,实现了多工况下的自适应状态,提高了操作便捷性,最后通过多组对比实验,深入分析实测数据,验证了该巡检系统在变温环境下依然具有较高的测长精度和稳定性.     

[Zn(Pybox)Br2]配合物的合成, 晶体结构及催化性质研究

合成了一种锌的配位化合物(Dm-Pybox)ZnBr2(1),(Dm-pybox为2,6-二[4',4'-二甲基噁唑啉]吡啶),通过核磁,元素分析,红外和X-射线单晶衍射表征确定其结构.对于配合物C15 H19 N3 O2 ZnBr2,Mr(分子量)=498.52,单斜晶系,空间群为P21/c,a=10.2422(19)?,b=16.141(3)?,c=11.513(2)?,β=99.128(2),V=1879.2(6)?3,Z=4,F(000)=984,μ=5.570mm-1,ρc=1.762g/cm3,最终的R1=0.0584(I>2σ(I))和wR2=0.1773(所有数据).配合物1可以在水溶剂和室温条件下高效催化二茂铁甲醛与活泼亚甲基化合物Knoevenagel缩合反应.     

唐代试律诗诗题用典与唐代祥瑞尚奇文化

唐代试律诗诗题对有关祥瑞及灵异之类典故的大量选用,不但体现了唐代统治者借祥瑞文化维护自身统治的治国策略,也表明了尚奇之风在唐代的盛行。     

非均匀介质下的可调光流控器件及其生化应用

 探讨了非均匀介质下不同光流控器件及其生化应用。在微流控芯片上，主要从2个方面开发和实现各类具有光波导、透镜、细胞计数、化学检测等功能的新器件。首先，在液液非均匀介质下，通过调节沟道内液体流速，控制液体间的对流扩散来实现液体在微腔内的渐变折射率分布和阶跃分布，从而得到其特殊的光学特性，例如光束分离、弯曲、自聚焦等。其次，在固体非均匀介质下，利用特殊的微流结构与液体相结合，实现更加灵敏可调的新型探测手段。这些新型技术手段分别在生物传感、能源生产、细胞探测及海水检测等诸多应用中可发挥关键性作用。     

基于变分不等式的多商品流供应链网络模型

针对多商品流的供应链网络均衡问题，考虑电子商务对供应链网络的影响，得到了制造商、零售商及需求市场的均衡条件，利用变分不等式形式把供应链网络均衡模型表述出来，得到了系统均衡的模型，利用拟牛顿法，得到了具多商品流的供应链网络均衡模型的求解方法。 用具体的数值算例验证了模型的合理性。