Detecting pore size distribution of activated carbon by low-field nuclear magnetic resonance

In this study, the transverse relaxation time (T₂) of activated carbon (AC) in different relative environment humidity was detected firstly by low-field nuclear magnetic resonance (LFNMR). The pore size (diameter) of AC distributions was calculated by the relationship between T₂ and surface relaxation rate (ρ), where ρ was obtained by the detection of nine porous materials with known pore size. The results showed that the pore size distributions of AC calculated by ρ < 0.19 nm/ms were in good agreement with that obtained by nitrogen adsorption method and proved that LFNMR as a new detection method was feasible for characterizing AC pore size distribution.     

Isoflavonoids from Astragalus membranaceus Hairy Roots

Chemistry of Natural Compounds -     

动力学模态分解方法重构及预测流场误差分析

利用动力学模态分解(dynamic mode decomposition,DMD)方法可以实现非定常流场的分解、重构和预测,但该方法重构和预测流场的误差需要给出定量分析.鉴于此,提出了定量描述动力学模态分解重构和预测流场的误差分析方法,以雷诺数Re=80的圆柱绕流二维流场数值模拟结果为例,研究了非线性流动和周期性流场重构和预测误差的动态变化情况.结果表明:依据能量大小确定的模态反映了流场的主要相干结构;低频、低增长/衰减率和大尺度的相干结构能量占比大,对流场的影响较大;DMD方法可以准确重构非线性和周期性变化流场,重构的误差小于10-10,预测流场的误差较重构流场出现跳跃增大现象;DMD方法预测非线性变化流场的误差在样本时间区间内较小(小于10-3),超出样本区间误差的发展急剧增大,变化情况依赖于数据样本;预测周期性流场的误差稳定在10-4左右.     

Acridone-Based Host Materials for Green Phosphorescent and Thermally Activated Delayed Fluorescent OLEDs with Low-Efficiency Roll-Offs

By linking the carbazole unit to the nitrogen atom of acridone through phenyl or pyridyl, two compounds, named 10-(4-(9H-carbazol-9-yl)phenyl)acridin-9(10H)-one (AC-Ph-Cz) and 10-(5-(9H-carbazol-9-yl)pyridin-2-yl)acridin-9(10H)-one (AC-Py-Cz) were designed and synthesized. These two materials, characterized with highly twisted and rigid structure, good thermal stability, and balanced carrier-transporting properties, were employed as host materials for green phosphorescent and thermally activated delayed fluorescent organic light-emitting diodes (OLEDs). The carbazole group, despite its small contribution to the highest occupied molecular orbitals (HOMOs) of these two materials, plays an essential role as an intramolecular host in energy delivering and improving the hole transporting ability of these two hosts. The incorporation of the electron-deficient pyridyl group as a linking group slightly improves the electron transporting capability of AC-Py-Cz. The green phosphorescent OLED (PhOLED) based on AC-Py-Cz exhibited excellent device performance with a turn-on voltage of 2.5 V, a maximum power efficiency and an external quantum efficiency (η_ext) of 89.8 lm W⁻¹ and 25.2 %, respectively, benefitting from the better charge-balancing ability of AC-Py-Cz host due to the presence of the pyridyl bridge. More importantly, all the devices based on these two hosts showed low efficiency roll-off at high brightness due to the suppressed non-radiative transition in the emitting layer. In particular, the AC-Py-Cz-hosted green PhOLED exhibited an efficiency roll-off of 1.6 % from the maximum next at a high brightness of 1000 cd m⁻² and a roll-off of 15.9 % at an extremely high brightness of 10000 cd m⁻². This study manifests that acridone-based host materials have great potential in fabricating OLEDs with low efficiency roll-off.     

高低温环境航天机构力矩特性测试平台研制

为了测试在太空环境下航天机构中弹性机构的性能指标,研制了高低温环境下测量角度-力矩特性的测试平台.分析测试平台测试原理后,设计了平台的机械结构、设计电气系统结构并搭建软件系统.机械结构考虑对被测对象的保护,针对高低温测试带有高低温箱,可以为被测对象提供-100℃～100℃的温度环境,具有热变形偏差测量与补偿设计,减少温度变化对测量精度的影响.软件系统具备收集、处理、存储数据和图形化显示能力.分析平台不确定度的组成,对传感器进行测试校准并对航天弹性机构进行测试,测试结果验证了:该测试平台的力矩检测范围为0～50 N·m,力矩检测精度≤0.5％FS,角度测量扩展不确定度为U=35.6″,得到了被测对象的角度-力矩特性曲线图.     

2017—2019 年北京地区实验动物质量抽检结果分析

摘要:目的 比对分析 2017—2019 年北京地区实验动物微生物及遗传质量监测结果,为实验动物产业发展提供参考。 方法 按照国家和地方现行实验动物检测标准,对北京地区实验动物生产单位进行抽检,并发布检测报告。按照报告数据,对此阶段小鼠、大鼠、豚鼠、地鼠、兔、犬、猴和小型猪共 8 个品种的实验动物按照品种、等级、单位等进行分类,分析质量问题,并与 2014—2016 年同期实验动物质量比对,分析变化趋势。 结果 2017—2019 年分别抽检动物 144、131 和 135 批次,检出不合格批次分别为 30、15 和 17 批。 不合格主要因素为兔、犬及猪免疫不达标(20 批) ,病原感染 20 批,未发现遗传变异。 与 2014—2016 年同期相比,未检出遗传问题相同,免疫不达标状况好转,但病原感染出现上升。 结论 通过质量分析比对,能够为实验动物产业健康发展提供数据支持。     

n维有限射影空间上d~e——析取矩阵的新构作

利用n维有限射影空间上的一些性质,构作了组合群验的数学模型de-析取矩阵,并研究了它的参数和Hamming距离.     

高陡横坡段桩柱式桥梁双桩基础受力分析

基于高陡横坡段桩柱式桥梁双桩基础承载特性,提出了一种改进有限杆单元计算分析方法.分析了高陡横坡段桩柱式桥梁双桩基础承载机理及受力特性,建立了双桩基础计算分析模型.其次,根据前、后桩与边坡相对位置关系,给出了后桩所受剩余下滑力与前桩所受土压力的比例关系.在传统有限杆单元分析方法基础上,结合陡坡桩受力特征,导得了考虑桩土共同作用与"P-Δ"效应的单元刚度矩阵修正方法,并在此基础上编制了适用于高陡横坡段桩柱式桥梁双桩基础的有限杆单元分析MATLAB计算程序.采用室内模型试验对本文计算方法进行验证,给出了适用于陡坡段桥梁桩基的设计流程图.研究结果表明:本文理论计算值与模型试验实测结果吻合良好,表明本文计算方法正确可行,可为同类工程设计提供参考.     

超强筋小麦粉面包烘焙技术研究

为了烘焙出能充分表现超强筋小麦济麦229面粉品质特性的优良面包,设置了4种醒发时间处理、5种酵母和糖用量处理、4种配粉处理,对超强筋小麦面粉的面包品质进行了评价分析。结果表明,在4个醒发时间处理中,当面团醒发时间为30min和面包胚醒发时间为50min时,烘焙的面包品质最好。在5种酵母和糖用量的处理中,利用吐司面包程序时,干酵母和糖的用量分别为6g和24g时烘焙的面包品质最好；利用法式面包程序时,干酵母和糖的用量分别为3g和18g时烘焙的面包品质最好。在4个配粉处理中,200g超强筋小麦济麦229面粉中添加100g普通小麦济麦22面粉的混粉烘焙得到的面包品质最好。因此,适当调整超强筋小麦粉面包的面团、面包胚醒发时间及物料配比,可以烘焙出品质优良的面包。     

减压扩散高阻密栅技术应用研究

本文对减压扩散机理及高阻密栅技术作了详细的分析,并就设备及工艺方面的关键技术进行了阐述,最后对减压扩散高方阻工艺及密栅匹配技术电池效率进行了对比分析,有以下结论:(1)减压扩散在工艺优化后,方阻均匀性得到大幅改善,达到3;以内.(2)减压扩散电池效率完全可达到常规产线的水平,且在高阻密栅方面更有优势,可有效提升太阳电池效率.