X光光电子能谱法测定胶片中氟,硅和铝的研究

应用Ｘ光光电子能谱法测定了几种彩色胶片表面层中氟的１ｓ能级的结合能；分别比较了水处理前后、溅蚀前后胶片护膜层氟的变化，表明氟化物分布在护膜最表层，是一种易溶于水的氟化物；测定了彩色片护膜层所含硅２ｐ能级的结合能，与自制彩色片护膜层测定结果比较，优质片含一种较多负电性，用与自制片的无机硅不同的硅化物作毛面剂；对溅蚀前后优质片和自产彩色片中的硅铝比变化进行比较，提出优质彩色片Ｆ－４００的护膜层可能是双     

Mixed C18 and C1 modification on an optical fiber for chromatographic sensing

An optical fiber-chromatographic sensor, aiming at simultaneous and selective response to multiple components following a chromatographic separation, is described. We report an improved approach for immobilization of octadecyl (C(18)) and methyl (C(1)) moieties as stationary phase on an optical fiber suitable as a sensing phase for organic solutes. By this approach, the stability and lifetime of the sensing layer as well as the detectability and retention behavior of the chromatographic sensor could be improved. Infrared spectroscopy was employed to confirm the presence of C(18) and C(1) moieties on the modified surface of the optical fiber. The chromatographic sensor was applied, with good sensitivity and chemical selectivity, to the simultaneous separation and detection of bromobenzene and toluene, using water as the mobile phase.     

高聚物非等温结晶动力学

由于等温ＤＳＣ法测定结晶动力学参数在实验上存在着一定的局限性，这些缺点可通过非等温ＤＳＣ法来克服。本文基于上述观点介绍了高聚物非等温结晶动力学的理论和实验方法，并对影响动力学过程的一些因素进行了讨论，对非等温结晶动力学的最新情况及发展倾向，应用情况作了介绍。     

超高感彩卷乳剂微晶体电镜研究

应用物理和化学相结合的方法，将超高感彩卷分层剥离，离心沉降，水洗除胶，电镜观测各层乳剂的微晶体结构。揭示了超高感彩卷各乳剂层的结构情况，披露了超高感彩剂制造技术。     

凝胶型聚合物电解质的电导率与温度的关系

凝胶型聚合物电解质的电导率与温度的关系孙晓光，林云青，齐力，景遐斌，王佛松（中国科学院长春应用化学研究所长春１３００２２）关键词凝胶电解质，离子电导率，活化能无定形聚合物电解质电导与温度的依赖关系一般可用Ｖｏｇｅｌ－Ｔａｍｍａｎ－Ｆｕｌｃｈｅｒｃ（Ｖ...     

A mesoporous non-precious metal boride system: synthesis of mesoporous cobalt boride by strictly controlled chemical reduction

Generating high surface area mesoporous transition metal boride is interesting because the incorporation of boron atoms generates lattice distortions that lead to the formation of amorphous metal boride with unique properties in catalysis. Here we report the first synthesis of mesoporous cobalt boron amorphous alloy colloidal particles using a soft template-directed assembly approach. Dual reducing agents are used to precisely control the chemical reduction process of mesoporous cobalt boron nanospheres. The Earth-abundance of cobalt boride combined with the high surface area and mesoporous nanoarchitecture enables solar-energy efficient photothermal conversion of CO₂ into CO compared to non-porous cobalt boron alloys and commercial cobalt catalysts.

Generating high surface area mesoporous transition metal boride is challenging but interesting because incorporation of boron atoms can generate lattice distortion to form amorphous metal boride which has unique properties in catalysis.     

远程教育管理技术及其实现

分析了远程教育管理涉及的教育模式和管理内容,并给出了基于ＣＥＲＮＥＴ、Ｉｎｔｅｒｎｅｔ网络环境下的初步实施方案,对阐述了如何实现ＷＷＷ服务器对数据库的高效防间和系统的安全等有关技术问题。     

THz spectroscopic investigation of 2,4-dinitrotoluene

We have investigated the terahertz (THz) spectrum of 2,4-DNT by using Fourier transform infrared spectroscopy in the 0.2–19.5 THz region. We also examined low-frequency intermolecular or phonon modes between 0.2 and 1.8 THz via THz time-domain spectroscopy. The extracted absorption coefficient and refractive index of an intermolecular band at 1.08 THz are 110 cm⁻¹ and 1.67, respectively. Density functional theory (DFT) was applied to obtain structure and vibrational frequencies of 2,4-DNT. The calculated results are in agreement with the experimental data. Observed vibrational frequencies have been interpreted using DFT. Two intermolecular or phonon modes were identified at 1.08 and 2.52 THz.     

E8010纤维素型全位置立向下电焊条的配方设计

根据全位置立向下焊接的特点和要求，在对现有各类焊条渣系的物理性能及工艺性能进行试验分析的基础上，通过大量的试验，确定了具有短渣特性的高氧化钛渣系及高发气量的微晶纤维作为电焊条的基本配方，并加入适量的铁砂，利用其在焊接时冶金化学反应中的放热反应，提高电焊条的熔敷效率。     

Synthesis and characterization of novel elastomeric poly(D,L-lactide urethane) maleate composites for bone tissue engineering

Here, we report the synthesis and characterization of a novel 4-arm poly(lactic acid urethane)-maleate (4PLAUMA) elastomer and its composites with nano-hydroxyapatite (nHA) as potential weight-bearing composite. The 4PLAUMA/nHA ratios of the composites were 1:3, 2:5, 1:2 and 1:1. FTIR and NMR characterization showed urethane and maleate units integrated into the PLA matrix. Energy dispersion and Auger electron spectroscopy confirmed homogeneous distribution of nHA in the polymer matrix. Maximum moduli and strength of the composites of 4PLAUMA/nHA, respectively, are 1973.31 ± 298.53 MPa and 78.10 ± 3.82 MPa for compression, 3630.46 ± 528.32 MPa and 6.23 ± 1.44 MPa for tension, 1810.42 ± 86.10 MPa and 13.00 ± 0.72 for bending, and 282.46 ± 24.91 MPa and 5.20 ± 0.85 MPa for torsion. The maximum tensile strains of the polymer and composites are in the range of 5–93%, and their maximum torsional strains vary from 0.26 to 0.90. The composites exhibited very slow degradation rates in aqueous solution, from approximately 50% mass remaining for the pure polymer to 75% mass remaining for composites with high nHA contents, after a period of 8 weeks. Increase in ceramic content increased mechanical properties, but decreased maximum strain, degradation rate, and swelling of the composites. Human bone marrow stem cells and human endothelial cells adhered and proliferated on 4PLAUMA films and degradation products of the composites showed little-to-no toxicity. These results demonstrate that novel 4-arm poly(lactic acid urethane)-maleate (4PLAUMA) elastomer and its nHA composites may have potential applications in regenerative medicine.