Fluid‐structure coupling of linear elastic model with compressible flow models

Cavitation erosion is caused in solids exposed to strong pressure waves developing in an adjacent fluid field. The knowledge of the transient distribution of stresses in the solid is important to understand the cause of damaging by comparisons with breaking points of the material. The modeling of this problem requires the coupling of the models for the fluid and the solid. For this purpose, we use a strategy based on the solution of coupled Riemann problems that has been originally developed for the coupling of 2 fluids. This concept is exemplified for the coupling of a linear elastic structure with an ideal gas. The coupling procedure relies on the solution of a nonlinear equation. Existence and uniqueness of the solution is proven. The coupling conditions are validated by means of quasi‐1D problems for which an explicit solution can be determined. For a more realistic scenario, a 2D application is considered where in a compressible single fluid, a hot gas bubble at low pressure collapses in a cold gas at high pressure near an adjacent structure.     

Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

Ni~(26+)离子态分辨光复合过程的R矩阵理论研究

利用基于相对论R矩阵理论的DARC程序系统计算了Ni 25+离子基态1s22s(2S1/2)和激发态1s22p(2P1/2,2P3/2)的光电离截面,并通过细致平衡原理获得了统一的光复合过程(即辐射复合和双电子复合)态分辨的截面,计算结果给出了辐射复合与双电子复合过程间的干涉效应.为了标识和分析KLL共振能区所有的共振峰,基于相对论组态相互作用理论(RCI)的FAC程序被用来计算共振峰的能量、强度及其相关的双激发态的辐射、俄歇跃迁几率以及共振宽度等.利用统一的光复合截面进一步得到了KLL双电子复合过程的伴线强度,并与孤立共振近似下FAC的计算结果以及以前的理论和实验结果进行了比较,对存在的一致性和偏差进行了分析和讨论.     

UJ24型电位差计的检修与调节

UJ24型电位差计使用时出现的故障,可以利用数字万用表排查故障,提出排查方案,进行维修与调节,使它尽快恢复到最佳工作状态,这样既节省厂家的维修时间又节省学校的维修费用。     

桐叶封弟新辨

桐叶封弟的真伪历来是学术界的公案,学者们大都对故事的真实性持否定态度。然而只要从故事的本身出发,注意分析当时故事核心人物间的关系以及权力对比,就不难发现,桐叶封弟故事的真实性是非常高的。桐叶封弟实为成王以桐叶戏弟为虚,行封叔虞于唐为实的一个借口,也反映出成王当时确有难言之隐。桐叶封弟中周公对成王的真实想法其实也早已心知肚明,"周公成之"是作为臣子的周公在故意配合成王。桐叶封弟的背后隐藏着周初朝中君臣权力间的博弈,对于君臣来说,故事的结果也是双赢。     

(2+1)维KD方程组的一类非亚纯行波解

通过行波变换将(2+1)维KD方程组转变为复域中的常微分方程,给出复合的(2+1)维KD方程组2(wk-3l2+3ak2 C1)u=2k4 u″-k2 a2 u3+(6k2b-3kal)u2+C2,v=lku+C1的一类非亚纯解的结构.     

基于老厂房改造的景观规划设计

随着城市化高速发展，老厂房再利用的问题日益急迫.上海是中国近代工业起源地,也是率先着手对彰显城市文脉的工业遗产进行调查和保护的历史文化名城.本文以上海典型案例入手，分析了具有代表性的老厂房改造的项目特点，并在此基础上，对常州大成三厂这一民国时期的纺织业遗留地块进行改造设计手法进行介绍，从设计理念、设计内容和节点设计3个方面，体现了文化传承和生态技术相融合理念.     

抗坏血酸/谷氨酸Maillard反应体系中间产物和褐变程度的研究

用磷酸缓冲溶液配制一系列不同质量分数的抗坏血酸/谷氨酸混合溶液pH8.0并在130℃下加热发生Maillard反应,对反应后体系的中间产物(A294nm)、褐变程度(A420nm)以及反应过程中抗坏血酸和谷氨酸的含量进行检测分析.结果显示,抗坏血酸通过热解产物与氨基酸发生Maillard反应,抗坏血酸质量分数的增大能促进反应体系的褐变,谷氨酸质量分数对反应体系褐变程度的影响不大.任意增大一种反应物的质量分数均可对无色中间产物的生成起促进作用,且抗坏血酸对中间产物生成的影响大于谷氨酸.     

城市治理首要应加强市民的思想道德建设——以湛江市治理交通秩序为例

交通混乱既影响城市形象,又制约经济发展。本文通过对湛江市区交通混乱现象进行深入调查研究,认为要从根本上改变这一现状,取得长效成果,除了采取行政立法、经济处罚、改善交通基础设施等治理措施外,还应着重加强市民的道德建设,提高其思想道德素质,培养市民良好的社会道德行为习惯。文章旨在为加强湛江市民道德建设,解决湛江及其它城市突出交通问题提供参考。