Structural characterization and ferromagnetic behavior of Fe-doped TiO2 powder by high-energy ball milling

Fe-doped TiO₂ powder was prepared by high-energy ball milling, using TiO₂ Degussa P-25 and α-Fe powders as the starting materials. The structure and magnetic properties of the Fe-doped TiO₂ powder were studied by X-ray diffraction, ⁵⁷Fe Mossbauer spectroscopy and vibrating sample magnetometer. The Reitveld refinement of XRD revealed that ball milling not only triggered incorporation of Fe in TiO₂ lattice but also induced the phase transformation from anatase to rutile in TiO₂ and consequently the milled Fe-doped TiO₂ powder contained only rutile.⁵⁷Fe Mössbauer effect measure showed that Fe atoms existed in Fe²⁺ and Fe³⁺ state, which were assigned to the solid solution Fe_xTi_1−xO₂. The magnetization measurements indicated that the milled Fe-doped TiO₂ powder was ferromagnetic above room temperature. The ferromagnetism in our milled Fe-doped TiO₂ powder seemingly does not come from Fe and iron oxides particles/clusters but from the Fe-doped TiO₂ powder matrices.     

Synergistic effect between 4-(2-pyridylazo) resorcin and chloride ion on the corrosion of cold rolled steel in 0.5 M sulfuric acid

The corrosion inhibition of 1-(2-pyridylazo)-2-naphthol (PAR) on the corrosion of cold rolled steel in 0.5 M sulfuric acid (H₂SO₄) was studied using weight loss method and potentiodynamic polarization method. Results obtained revealed that together with chloride ion, PAR is an effective corrosion inhibitor for steel corrosion in sulfuric acid. It was found that for steel corrosion inhibition in the presence of single PAR in sulfuric acid the Temkin adsorption isotherm may be used to explain the adsorption phenomenon. For the mixture of PAR and NaCl used as corrosion inhibitor, however, the Langmuir adsorption isotherm can be used to satisfactorily elucidate the adsorption of mixture of PAR and NaCl. Potentiodynamic polarization studies showed that single PAR mainly acts as a cathodic inhibitor for the corrosion of steel in 0.5 M sulfuric acid. The mixture of PAR and chloride ion, however, acts as a mixed type inhibitor that mainly inhibits cathodic reaction of the steel corrosion in sulfuric acid. By means of electrochemical polarization tests, a desorption potential at ca. −370 mV was observed for the adsorption of mixture of PAR and chloride ion, when potential reaches this value, adsorbed inhibitor molecule heavily departs from the steel surface. For the mixture of PAR and chloride ion, thermodynamic parameters such as adsorption heat, adsorption entropy and adsorption free energy were obtained from experimental data of the temperature studies of the inhibition process at four temperatures ranging from 30 to 45 °C, the kinetic data such as apparent activation energies and pre-exponential factors at different concentrations of the inhibitor were calculated, and the effect of the apparent activation energies and pre-exponential factors on the corrosion rates of cold rolled steel was discussed. The most suitable range of inhibitor concentration was discussed. The inhibitive action was satisfactorily explained by using both thermodynamic and kinetic models. Synergism between chloride ion and PAR was proposed. The results obtained from weight loss and potentiodynamic polarization were in good agreement.     

在增溶剂存在下硫氰酸盐-结晶紫光度法测定微量钨

在明胶存在下,钨与硫氰酸盐和结晶紫生成可溶性三元缔合物,最大吸收波长为540nm,表现摩尔吸光系数为4.1×10~5 L·mol~(-1)·cm~(-1),钨在0～11μg/25ml范围内服从比尔定律。方法已用于测定岩石中微量钨。     

球笼烯（C_（60）／C_（70）载体钕系催化丁二烯聚合的研究

球笼烯（Ｃ_（６０）／Ｃ_（７０）载体钕系催化丁二烯聚合的研究赵春英，陈滇宝，仲崇祺，董文寰，徐玲，唐学明（青岛化工学院高分子材料系青岛２６６０４２）杨海滨，李明辉，邹广田（吉林大学超硬材料国家重点实验室长春１３００２３）关键词球碳载体钕系催化剂，聚丁...     

交流示波极谱法中i_f～E曲线的研究 Ⅳ.示波极谱氧化还原滴定法

在i_f～E曲线的测量方法中,由于氧化和还原剂都具有电化学活性,因此,这两种试剂的量就可以通过不同电极电位处的法拉第电流峰敏锐地反映出来。当利用i_f～E曲线指示氧化还原滴定终点时,终点的示波图形,不仅反映氧化和还原剂电流峰的出现和消失,而且反     

Photodissociation dynamics of the methyl radical at 212.5 nm: effect of parent internal excitation

Photodissociation dynamics of the CH3 radical at 212.5 nm has been investigated using the H atom Rydberg tagging time-of-flight method with a pure CH3 radical source generated by the photolysis of CH3I at 266 nm. Time-of-flight spectra of the H atom products from the photolysis of both cold and hot methyl radicals have been measured at different photolysis polarizations. Experimental results indicate that the photodissociation of the methyl radical in its ground vibrational state at 212.5 nm excitation occurs on a very fast time scale in comparison with its rotational period, indicating the CH3 dissociation at 212.5 nm occurs on the excited 3s Rydberg state surface. Experimental evidence also shows that the photodissociation of the methyl radical in the nu2 = 1 state of the umbrella mode at 212.5 nm excitation is characteristically different from that in the ground vibrational state.     

Dynamics of photodissociation of 3,3,3-d(3)-propene at 157 nm: site effect and hydrogen migration

In a preceding paper [Lee et al., J. Chem. Phys. 119, 827 (2003)], we measured the kinetic-energy distributions P(E(t)) and branching ratios of products from photolysis of propene at 157 nm using time-of-flight spectroscopy combined with photoionization. In the present work, hydrogen migration before fragmentation and a site effect on P(E(t)) and branching ratios were revealed from the photodissociation of CD(3)CHCH(2). Labeling of the methyl group with deuterium enabled us to differentiate between elimination of atomic and molecular hydrogen from the vinyl moiety and from the methyl moiety; the P(E(t)) and relative yields for the formation of H, D, H(2), HD, and D(2) were measured. Deuterium labeling allowed us to also differentiate the fragmentation after hydrogen transfer from that before hydrogen migration. The observation of isotopic variants of CD(3) and C(2)H(3) radicals in the C-C bond cleavage provides evidence for hydrogen transfer of propene because of site specificity. The fraction of fragmentation after hydrogen transfer is estimated to be 25%. The isotope-specific branching ratios for five dissociation pathways of CD(3)CHCH(2) were evaluated.     

~(13)C代谢通量分析

代谢通量分析(metabolic flux analysis,MFA)是通过确定代谢网络中代谢流分布来表征细胞代谢状态的强有力的工具。鉴于计量学代谢通量分析在处理复杂代谢网络时表现出的局限性,发展了以13C标记实验为基础的13C MFA。本文介绍了13C MFA的原理与方法,总结和评述了13C MFA在实验与数据分析方面的最新进展以及MFA在功能基因组研究中的重要地位,同时对代谢通量分析的发展前景进行了展望。     

固定化酶不对称合成（S）＋—（＋）—布洛芬的研究

能够不对称水解布洛芬乙酯的酵母菌Ｔ１５８固定化在壳聚糖珠中，固定化酵母菌的活力回收达６０％，最适温度为４５℃，半衰期为７５ｄ以上。     

Ultraviolet photochemistry of ethane: implications for the atmospheric chemistry of the gas giants

Chemical processing in the stratospheres of the gas giants is driven by incident vacuum ultraviolet (VUV) light. Ethane is an important constituent in the atmospheres of the gas giants in our solar system. The present work describes translational spectroscopy studies of the VUV photochemistry of ethane using tuneable radiation in the wavelength range 112 ≤ λ ≤ 126 nm from a free electron laser and event-triggered, fast-framing, multi-mass imaging detection methods. Contributions from at least five primary photofragmentation pathways yielding CH₂, CH₃ and/or H atom products are demonstrated and interpreted in terms of unimolecular decay following rapid non-adiabatic coupling to the ground state potential energy surface. These data serve to highlight parallels with methane photochemistry and limitations in contemporary models of the photoinduced stratospheric chemistry of the gas giants. The work identifies additional photochemical reactions that require incorporation into next generation extraterrestrial atmospheric chemistry models which should help rationalise hitherto unexplained aspects of the atmospheric ethane/acetylene ratios revealed by the Cassini–Huygens fly-by of Jupiter.

The vacuum ultraviolet photodissociation dynamics of ethane provide clues for modelling the atmospheric chemistry of the gas giants.