部分还原氧化石墨烯的制备、 表征及对人宫颈癌HeLa细胞的体外杀伤作用

以氧化石墨烯(GO)为原料, 利用温和方法制备了3种不同还原程度的部分还原氧化石墨烯pRGO₁, pRGO₂和pRGO₃(pRGO_1—3)； 利用傅里叶变换红外光谱(FTIR)、 拉曼光谱(Raman)、 X 射线光电子能谱(XPS)、 紫外-可见光谱(UV-Vis)、 透射电子显微镜(TEM)和 EDS能谱对其结构和形貌进行了表征. 细胞实验结果表明, 无激光照射下pRGO_1—3本身的细胞毒性较低; 近红外(NIR)激光照射下pRGO_1—3通过光热和光毒性双重作用杀伤肿瘤细胞. 实验结果显示了pRGO 在肿瘤光热疗法和光动力疗法领域的应用潜力.     

Novel alternating copolyoxamides with high crystallinity and heat resistance

Two series of novel alternating copolyoxamides (PAnT-alt-n2 and PAn2-alt-62) are synthesized via solution/solid-state polycondensation (SSP). The alternating structures are analyzed carefully with ¹H NMR and ¹³C NMR spectra. The melting behaviors, thermal stabilities, crystal structures and crystallinities are systematically evaluated by DSC, TGA and WAXD. The results reveal that these alternating copolyoxamides possess almost perfect alternating chain structures and have high melting temperature (T_m > 270 °C), high crystallinity (X_c > 32%) and high decomposition temperature (T₅ > 405 °C) as well as low saturated water absorption (<3.5 wt%), which suggests that they have high potential as engineering plastic of high heat resistant.     

电缆槽对电缆间串扰的影响研究

电缆在使用时一般会铺设在电缆槽中,而电缆槽对铺设其中电缆之间的串扰会形成影响.针对电缆槽中电缆之间的串扰问题,提出一种结合多端口网络理论及分块级联思想的建模方法,使用基于波导格林函数的矩量法来提取电缆槽中电缆间的分布参数,并用虚拟节点理论将提取的分布参数矩阵转化为模型中的传输函数.通过与商业电磁仿真软件的仿真结果进行对比,验证了本文的模型及算法在分析电缆槽中电缆间的串扰问题时具有较好的精确度,最后运用此方法分析了电缆处于电缆槽中不同位置时的线间串扰大小,并结合铁路现场的实际情况对电缆槽中电缆的布线方式提出了建议.     

Electro-assisted Molecular Assembly Giving Atomic-Scale Catalytic Active-Site Detection

The artificially accurate design of nonmetal electrocatalysts’ active site has been a huge challenge because no pure active species with the specific structure could be strictly controlled by traditional synthetic methods. Species with a multiconfiguration in the catalyst hinder identification of the active site and the subsequent comprehension of the reaction mechanism. We have developed a novel electro-assisted molecular assembly strategy to obtain a pure pentagon ring on perfect graphene avoiding other reconstructed structures. More importantly, the active atom was confirmed by the subtle passivation process as the topmost carbon atom. Recognition of the carbon-defect electrocatalysis reaction mechanism was first downsized to the single-atom scale from the experimental perspective. It is expected that this innovative electro-assisted molecular assembly strategy could be extensively applied in the active structure-controlled synthesis of nonmetal electrocatalysts and verification of the exact active atom.     

Flow-induced shear stress and deformation of a core–shell-structured microcapsule in a microchannel

A numerical model was developed and validated to investigate the fluid–structure interactions between fully developed pipe flow and core–shell-structured microcapsule in a microchannel. Different flow rates and microcapsule shell thicknesses were considered. A sixth-order rotational symmetric distribution of von Mises stress over the microcapsule shell can be observed on the microcapsule with a thinner shell configuration, especially at higher flow rate conditions. It is also observed that when being carried along in a fully developed pipe flow, the microcapsule with a thinner shell tends to accumulate stress at a higher rate compared to that with a thicker shell. In general, for the same microcapsule configuration, higher flow velocity would induce a higher stress level over the microcapsule shell. The deformation gradient was used to capture the microcapsule's deformation in the present study. The effect of Young's modulus on the microcapsule shell on the microcapsule deformation was investigated as well. Our findings will shed light on the understanding of the stability of core–shell-structured microcapsule when subjected to flow-induced shear stress in a microfluidic system, enabling a more exquisite control over the breakup dynamics of drug-loaded microcapsule for biomedical applications.     

Ultrahigh Loading Copper Single Atom Catalyst for Palladium-free Wacker Oxidation

Wacker oxidation is an industry-adopted process to transform olefins into value-added epoxides and carbonyls. However, traditional Wacker oxidation involves the use of homogeneous palladium and copper catalysts for the olefin addition and reductive elimination. Here, we demonstrated an ultrahigh loading Cu single atom catalyst(14% Cu, mass fraction) for the palladium-free Wacker oxidation of 4-vinylanisole into the corresponding ketone with N-methylhydroxylamine hydrochloride as an additive under mild conditions. Mechanistic studies by ¹⁸O and deuterium isotope labelling revealed a hydrogen shift mechanism in this palladium-free process using N-methylhydroxylamine hydrochloride as the oxygen source. The reaction scope can be further extended to Kucherov oxidation. Our study paves the way to replace noble metal catalysts in the traditional homogeneous processes with single atom catalysts.     

基于MD-LBP关联方向特征的铁路隧道漏缆卡扣检测算法

全路段跟车拍摄隧道漏缆卡扣图像再进行逐张排查,是实现卡扣故障检测的重要手段.针对目前LBP、CS-LBP等相关变体算法存在描述子质量不佳、特征维度过高的问题,提出MD-LBP关联方向特征提取算法实现故障卡扣的检测工作.该算法首先对输入图像进行高斯滤波预处理,根据图像的全局灰度均值得到图像的自适应阈值;其次计算图像的三层MD-LBP特征图结构,依次经过两次下采样分别得到Cell主方向特征和Block主方向特征;然后再在Block特征图上提取关联方向特征,并以此作为描述子;最后通过SVM区分故障卡扣,完成检测工作.实验还对比了LBP、H OG等9种特征描述子的检测情况,结果表明该算法不仅特征维度低,并且检测故障卡扣的召回率和精准度都达到了85％.     

Majorana Representation for a Composite System

International Journal of Theoretical Physics - The Majorana representation, which provides an intuitive way to represent the quantum state by stars on the Bloch sphere, has drawn considerable...     

钩形弯交叉口信号协同控制优化方法研究

针对车辆在钩形弯交叉口与相邻常规交叉口间的整体运行特性，建立了各条车道的车辆平均延误计算模型。以各交叉口的周期时长和相位绿灯时间为约束，钩形弯交叉口与相邻常规交叉口间的车辆平均延误最小为目标，建立了信号协同配时方案。以位于苏州市高新区内有轨电车沿线的两个相邻交叉口为例，采用实际数据验证所建立的方法，并设置钩形弯渠化方案。将设置的钩形弯交叉口与其相邻常规交叉口的信号协同作为改进方法，在VISSIM软件中对比分析改进方案与现状方案的车辆延误指标。实验结果表明，钩形弯交叉口与相邻常规交叉口的信号协同优化方法可有效提高交叉口的通行能力，尤其是干道直行机动车的通行能力，可降低车辆的平均延误。