Eco‐friendly ionic liquid assisted capillary electrophoresis and α‐acid glycoprotein‐assisted liquid chromatography for simultaneous determination of anticancer drugs in human fluids

In the current work, two eco‐friendly analytical methods based on capillary electrophoresis (CE) and reversed phase liquid chromatography (RPLC) were developed for simultaneous determination of the most commonly used anticancer drugs for Hodgkin's disease: methotrexate (MTX), vinblastine, chlorambucil and dacarbazine. A background electrolyte (BGE) of 12.5 mmol/L phosphate buffer at pH 7.4 and 0.1 µmol/L 1‐butyl‐3‐methyl imidazolium bromide (BMImBr) ionic liquid (IL) was used for CE measurements at 250 nm detection wavelength, 20 kV applied voltage and 25 °C. The rinsing protocol was significantly improved to reduce the adsorption of IL on the interior surface of capillary. Moreover, RPLC method was developed on α‐1‐acid glycoprotein (AGP) column. Mobile phase was 10 mmol/L phosphate buffer at pH 6.0 (100% v/v) and flow rate at 0.1 mL/min. As AGP is a chiral column, it was successfully separated l ‐MTX from its enantiomer impurity d ‐MTX. Good linearity of quantitative analysis was achieved with coefficients of determinations (r²) >0.995. The stability of drugs measurements was investigated with adequate recoveries up to 24 h storage time under ambient temperature. The limits of detection were <50 and 90 ng/mL by CE and RPLC, respectively. The using of short‐chain IL as an additive in BGE achieved 600‐fold sensitivity enhancement compared with conventional Capillary Zone Electrophoresis (CZE). Therefore, for the first time, the proposed methods were successfully applied to determine simultaneously the analytes in human plasma and urine samples at clinically relevant concentrations with fast and simple pretreatments. Developed IL‐assisted CE and RPLC methods were also applied to measure MTX levels in patients’ samples over time. Copyright © 2014 John Wiley & Sons, Ltd.     

A short note on the entrainment and exit boundary conditions

An attempt is made to find out the suitable entrainment and exit boundary conditions in laminar flow situations. Streamfunction vorticity formulation of the Navier–Stokes equations are solved by ADI method. Two‐dimensional laminar plane wall jet flow is used to test different forms of the boundary conditions. Results are compared with the experimental and similarity solution and the proper boundary condition is suggested. The Kind 1 boundary condition is recommended. It consists of zero first derivative condition for velocity variable and for streamfunction equation, mixed derivative at the entrainment and exit boundaries. Copyright © 2005 John Wiley & Sons, Ltd.     

Extractive spectrophotometric determination of Cobalt(II) in synthetic and pharmaceutical samples using Cyanex 923.

Cyanex 923 has been proposed as a sensitive analytical reagent for the direct extractive spectrophotometric determination of cobalt(II). Cobalt(II) forms a blue-colored complex with Cyanex 923 in the organic phase. The maximum absorbance of the complex is measured at 635 nm. Beer's law was obeyed in the range 58.9 - 589.0 microg of cobalt. The molar absorptivitiy and Sandell's sensitivity of the complex was calculated to be 6.79 x 10920 l mol(-1) cm(-1) and 0.088 microg cm(-2), respectively. The nature of the extracted species was found to be Co(SCN)2 x 2S. An excellent linearity with a correlation coefficient value of 0.999 was obtained for the Co(II)-Cyanex 923 complex. Stability and regeneration of the reagent (Cyanex 923) for reuse is the main advantage of the present method. The method was successfully applied to the determination of cobalt in synthetic mixtures and pharmaceutical samples was found to give values close to the actual ones. Standard alloy samples, such as high-speed tool BCS 484 and 485, have been tested for the determination of cobalt for the purpose of validating the present method. The results of the proposed method are comparable with atomic absorption spectrometry and were found to be in good agreement.     

Synchronized whistlers recorded at Varanasi

Some interesting events of synchronized whistlers recorded at low latitude station Varanasi during magnetic storm period of the year 1977 are presented. The dynamic spectrum analysis shows that the component whistlers are Eckersley whistlers having dispersion 10 s^1/2 and 30 s^1/2. An attempt has been made to explain the dynamic spectra using lightning discharge generated from magnetospheric sources     

Differentiators and the geometry of polynomials

In 1959, Davis introduced the concept of a differentiator of an operator on a finite-dimensional Hilbert space. We prove that every such operator possesses a differentiator. We also use the theory of differentiators to solve several problems in the geometry of polynomials. For instance, we answer in the affirmative a twenty year old unsolved conjecture of Schoenberg, a related conjecture of Katsoprinakis and a fifty year old unsolved conjecture of De Bruijn and Springer.     

Rolling of Al-SiC_p Composites

Aluminum based metal matrix composites are offering o utstanding properties in a number of automotive and aircraft components and body structures. The major advantages of these composite materials are their high st rength to weight ratio, high stiffness, high hardness, wear resistance, low coef ficient of thermal expansion, superior dimensional stability and versatility to designer. In addition to these their isotropic properties, good forming characte ristics, easy availability of cheaper reinforcements...     

Thermal stability of shear-induced precursor structures in isotactic polypropylene by rheo-X-ray techniques with couette flow geometry

Combined in situ rheo-SAXS (small-angle X-ray scattering) and -WAXD (wide-angle X-ray diffraction) studies using couette flow geometry were carried out to probe thermal stabilty of shear-induced oriented precursor structure in isotactic polypropylene (iPP) at around its normal melting point (162 °C). Although SAXS results corroborated the emerging consensus about the formation of “long-living” metastable mesomorphic precursor structures in sheared iPP melts, these are the first quantitative measures of the limiting temperature at which no oriented structures survive. At the applied shear, rate = 60 s⁻¹ and duration t_s = 5 s, the oriented iPP structures survived a temperature of 185 °C for 1 h after shear, while no stable structures were detected at and above 195 °C. Following Keller's concepts of chain orientation in flow, it is proposed that the chains with highly oriented high molecular weight fraction are primarily responsible for their stability at high temperatures. Furthermore, the effects of flow condition, specifically the shear temperature, on the distributions of oriented and unoriented crystals were determined from rheo-WAXD results. As expected, at a constant flow intensity (i.e., rate = 30 s⁻¹ and duration, t_s = 5 s), the oriented crystal fraction decreased with the increase in temperature above 155 °C, below which the oriented fraction decreased with the decrease in temperature. As a result, a crystallinty “phase” diagram, i.e., temperature versus crystal fraction ratio, exhibited a peculiar “hourglass” shape, similar to that found in many two-phase polymer–polymer blends. This can be explained by the competition between the oriented and unoriented crystals in the available crystallizable species. Below the shear temperature (155 °C), the unoriented crystals crystallized so rapidly that they overwhelmed the crystallization of the oriented crystals, thus depleting a major portion of the crystallizable species and increasing their contribution in the final total crystalline phase. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3553–3570, 2006     

Discrete facility location with nonlinear diseconomies in fixed costs

A discrete facility location problem is formulated where the total fixed cost for establishing the facilities includes a component that is a nonlinear function of the number of facilities being established. Some theoretical properties of the solution are derived when this fixed cost is a convex nondecreasing function of the number of facilities. Based on these properties an efficient bisection heuristic is developed where at each iteration, the classical uncapacitated facility location and/or m-median subproblems are solved using available efficient heuristics.     

Palladium(0)-catalyzed regioselective synthesis of alpha-dehydro-beta-amino esters from amines and allyl acetates: synthesis of a alpha-dehydro-beta-amino acid derived cyclic peptide as a constrained beta-turn mimic

Acetates derived from the adducts of the Baylis-Hillman reaction can be reacted in a regioselective manner with amines in the presence of palladium(0) catalyst to afford alpha-dehydro-beta-amino esters (2 and 3) in good yields. The regioselectivity of the reaction can be controlled by temperature and reaction medium leading to the synthesis of regioisomers 2 or 3. The alpha-dehydro-beta-amino acid 3 is a turn inducer, and the dipeptides 6 derived from it show the presence of an eight-membered intramolecular hydrogen bond. Also, cobalt(II) chloride catalyzes the cleavage of epoxy peptides with alpha-dehydro-beta-amino acid derivative 3b to afford the corresponding dipeptide derivatives 8, which exhibit an intramolecular hydrogen bond and thus mimic a beta-turn. This intramolecular hydrogen bonding preorganizes the corresponding diallylated peptide 8c for cyclization via ring-closing metathesis to afford the cyclic peptide 9 as a constrained mimic of a beta-turn.     

Near infrared spectral investigations of hydration of 18-crown-6 in HDO-D2O solutions at different temperatures

Near infrared spectra of solution of 6.4 M HDO in D(2)O have been obtained at 15, 25, 30, and 35 degrees C. It was observed that the bands of HDO in D(2)O occur at 1416, 1525, 1556, and 1666 nm, which are in good agreement with the similar data reported earlier by Worley and Klotz. The calculations of enthalpy change for hydrogen bond formation (DeltaH degrees ) yielded the value of -2.5+/-0.4 kcal mol(-1), which is in excellent agreement with the value reported by Walrafen. Similar spectra were recorded for 1 and 2 m 18-crown-6 (18C6) dissolved in the solution of HDO in D(2)O at different temperatures. The band positions remain unchanged, however, the variation of intensity as a function of concentration of 18C6 and temperature clearly indicate that 18C6 acts as a structure making solute. The structural temperature and DeltaH degrees values have been obtained for the 18C6 solutions. These results are explained on the basis of the stabilization of 18C6 in the D(3d) conformation through hydrogen bonding of HDO molecules [doubly hydrogen bonded, i.e. bridging, and singly hydrogen bonded] to the oxygen atoms of 18C6 molecules. Slightly different DeltaH degrees values obtained can be attributed to clathrate like structure at 1 m 18C6 concentration while at 2 m 18C6 concentration it is postulated that the hydrophobic interactions are contributing additionally.