A microfluidics-dispensing-printing strategy for Janus photonic crystal microspheres towards smart patterned displays

From the implementation point of view, the printable magnetic Janus colloidal photonic crystals (CPCs) microspheres are highly desirable. Herein, we developed a dispensing-printing strategy for magnetic Janus CPCs display via a microfluidics-automatic printing system. Monodisperse core/shell colloidal particles and magnetic Fe₃O₄ nanoparticles precursor serve as inks. Based on the equilibrium of three-phase interfacial tensions, Janus structure is successfully formed, followed by UV irradiation and self-assembly of colloid particle to generate magnetic Janus CPCs microspheres. Notably, this method shows distinct superiority with highly uniform Janus CPCs structure, where the TMPTA/Fe₃O₄ hemisphere is in the bottom side while CPCs hemisphere is in the top side. Thus, by using Janus CPCs microspheres with two different structural colors as pixel points, a pattern with red flower and green leaf is achieved. Moreover, 1D linear Janus CPCs pattern encapsulated by hydrogel is also fabricated. Both the color and the shape can be changed under the traction of magnets, showing great potentials in flexible smart displays. We believe this work not only offers a new feasible pathway to construct magnetic Janus CPCs patterns by a dispensing-printable fashion, but also provides new opportunities for flexible and smart displays.     

城市治理首要应加强市民的思想道德建设——以湛江市治理交通秩序为例

交通混乱既影响城市形象,又制约经济发展。本文通过对湛江市区交通混乱现象进行深入调查研究,认为要从根本上改变这一现状,取得长效成果,除了采取行政立法、经济处罚、改善交通基础设施等治理措施外,还应着重加强市民的道德建设,提高其思想道德素质,培养市民良好的社会道德行为习惯。文章旨在为加强湛江市民道德建设,解决湛江及其它城市突出交通问题提供参考。     

粉末冶金陶瓷模工艺中的快速脱蜡新技术

粉末冶金陶瓷模工艺是一种先进的过净形成形工艺．本文报道该工艺中一种新的脱蜡技术．采用快速加热、管径集中热量和定向导热传热综合方法，在陶瓷模和大部分蜡模材料处于较低温度下，使蜡模材料来不及发生显著的热膨胀而直接蒸发，得到脱蜡干净、外形完整的陶瓷模．     

机立窑鼓风机采用调速装置的探讨

介绍了机立窑鼓风机调速装置的工作原理和工作效果．提出了风机的选型原则。     

Naphthalimide-thiazoles as novel photonucleases: molecular design, synthesis, and evaluation

A new family of photonucleases, naphthalimide-thiazoles was synthesized and evaluated. These compounds intercalated into DNA efficiently and damaged DNA photochemically at concentrations as low as 5 μM. Mechanistic experiment suggests that a novel naphthalimide-thiazole radical produced via an excited triple state might be involved in the DNA photodamage. Different activity may arise from the impact of substituents at 2-phenyl ring of thiazole on the electron population of excited triple state according to AM1 semi-empirical calculation.     

具有次亚B性质的ωα＋1－紧T1空间是ωα－Lindel?f空间

在本文中，我们证明了具有次亚Ｂ性质的ω_α＋1-紧Ｔ₁空间是ω_α－Ｌｉｎｄｅｌ?ｆ空间，此结果改进并推广了［１］中的主要结果。     

闭合回路在磁场中的运动

1载流圆环在匀强磁场中的受力情况 半径为r0,通以电流I的弹性圆环,放在光滑的水平面上,磁感强度为B0的匀强磁场垂直穿过圆环,如图1所示.     

大尺寸YBa2Cu3O7—δ超导体的研制

利用固相反应法成功地制备了直径为100mm,厚为5mm的大尺寸YBa_2Cu_3O_(7-δ)超导体。在通氧,930℃热处理45min后,超导体的上限转变温度为94K,零电阻温度为92K。x射线衍射进行物相定性,扫描电镜进行形貌和超导电性关系的对比观察。选区电子衍射给出YBa_2Cu_3O_(7-δ)超导体的晶格参数为a=0.348nm,b=0.377nm,c=0.716nm,属于正交晶系。     

Temperature dependence of interband transition energy in InGaAsN strain-compensated quantum-well and ridge-waveguide lasers fabricated with pulsed anodic oxidation

Ridge-waveguide InGaAsN triple-quantum-well strain-compensated lasers grown by metal organic chemical vapor deposition were fabricated with pulsed anodic oxidation. The laser’s output power reached 145 mW in continuous-wave mode at room temperature for a 4-?m -stripe-width laser. Continuous-wave single longitudinal mode operation was maintained at a high injection current level with a wavelength of 1287.3 nm at room temperature. Single longitudinal mode operation at 1317.2 nm was achieved at twice the threshold current at 100 °C. The band gap of InGaAsN in the quantum wells at different temperatures was calculated and compared to the measured temperature-dependent laser wavelength.