松木-聚氯乙烯复合材料催化热解特性的研究

通过热重法研究了松木与聚氯乙烯复合材料的催化热解特性,结果表明聚氯乙烯脱氯阶段与松木的纤维素、半纤维素热分解阶段温度区间重合,二者共热解时存在协同效应,并且HCl的释放对纤维素的脱水反应能够产生催化作用,HCl释放也对木质素的热分解及碳化反应有着明显的催化作用,导致二者共热解制备的碳化物产率提高,约为29.61%。并且利用元素分析仪、扫描电镜和能谱仪对成碳材料进行表征分析,结果表明成碳材料表面粗糙呈现多孔结构,其碳元素含量较高达到74.67%。     

Classification of Four-symbol Orthogonal Arrays of Size 16 and 5(Maximal) Constraints

The enumeration of equivalence class of designs is an important combinatorial problem (see Clark and Dean, 2001, etc.). Zhang et al.(1995) present a concept of design equivalence. Based on this concept and subsequent the work (Pang 1996), classification of orthogonal arrays (OA's) of size 16 and 5 constraints is made and 72 kinds of equivalence classes are obtained. And the optimal arrays under an optimality criterion-maximum-minimum distance are found. Also, a very interesting combinatorial property is obtained as follows:     

The effects of doubly excited states on ionization balance

The effects of highly doubly excited states on ionization balance are investigated. In the calculation, A Collisional-Radiative model in Detailed-Configuration-Accounting (DCA) is applied to population calculations for NLTE plasmas. Configuration-averaged rate coefficients that needed in the rate equations are obtained based on the first order perturbation theory. The Hatree-Fock-Slater self-consistent-field method is used to calculate the electron wave functions. The mean ionization stage of high-Z plasma Lu is presented. The comparison shows that the mean ionization stage increases more than 3 stages when doubly excited states 5l6l' and 5l5l' are not included in the population calculations.     

应用程序用户界面设计

随着计算机软、硬件技术的发展，应用程序用户界面的重要性与日俱增，而在设计程序时如何合理的编排、处理界面元素，设计出美观实用的用户界面，本文将作出论述。     

生长温度对碳纳米管阴极场发射性能的影响

碳纳米管(Carbon Nanotubes,CNTs)场发射平面显示器(Field Emission Display,FED)与其他显示器比较显示了其独特优点,被认为是未来理想的平面显示器之一。碳纳米管阴极作为器件的核心部分,其性能的好坏直接影响显示器的性能。针对30~60英寸(76.2~152.4cm)大屏幕显示器所用的厚膜工艺,即采用丝网印刷法制备了碳纳米管阴极阵列,研究了化学气相沉积法在不同温度下生长的CNTs的场发射电流-电压特性,找到了适合FED用碳纳米管的最佳生长温度。结果表明生长温度越高(750℃),CNTs场发射性能越好。并用荧光粉阳极测试这些CNTs的场发射发光显示效果,验证了上述结论。     

基于CAPPFramework的CAPP系统的开发与应用

在国家863CIMS目标产品CAPPFramework系统的基础上，研究了面向对象的信息建模技术、信息模型驱动的所见即所得工艺设计技术、工作流技术．并在此基础上进行集成化、智能化计算机辅助工艺设计(CAPP)的应用与开发，实现了工艺设计的自动化，基本达到了在信息集成基础上的工艺设计与工艺信息管理一体化的目的，对企业的CAPP实施具有一定的参考价值．     

高能、超短脉冲、可调谐激光器用掺镱氟磷酸盐玻璃研究进展

Yb^3 与其它稀土离子相比有最简单的能级结构，这使它具有一些独特的性质，如避免激发态吸收，消除上转换和浓度猝灭等，因此它是高能输出激光器介质的理想掺杂离子。氟磷玻璃综合了氟化物玻璃和磷酸盐玻璃的优点，可降低磷酸盐的声子能量，改善其易吸湿性；提高氟化物玻璃的物理化学性能等，这使它成为稀土掺杂可调谐光纤激光器的很好的掺杂介质。众多研究表明，Yb^3 掺杂氟磷玻璃是一种很有前途的激光工作物质。本文总结了Yb^3 掺杂氟磷玻璃的特点，性质，结构及存在的问题。     

分散剂对RF凝胶掺钛过程的影响

 以间苯二酚、甲醛和经分散的纳米钛粉为反应前体，利用物理掺杂方法研究了掺钛RF凝胶的制备工艺，并在凝胶过程中以zeta电位 粒径分布测试仪对溶液的粒径分布进行分析测试。实验发现六偏磷酸钠对纳米钛粉的分散性最好，掺杂后凝胶时间明显缩短；分散剂种类和用量对凝胶时间有较大影响，其用量为纳米钛粉量的50~100倍为宜。     

Effects of Substrate Temperature on Helium Content and Microstructure of Nanocrystalline Titanium Films

Helium-charged nanocrystalline titanium films have been deposited by HeAr magnetron co-sputtering. The effects of substrate temperature on the helium content and microstructure of the nanocrystalline titanium films have been studied. The results indicate that helium atoms with a high concentration are evenly incorporated in the deposited titanium films. When the substrate temperature increases from 60℃ to 350℃ while the other deposition＇parameters are fixed, the helium content decreases gradually from 38.6 at.% to 9.2at.%, which proves that nanocrystalline Ti films have a great helium storage capacity. The 20 angle of the Bragg peak of （002） crystal planes of the He-charged Ti film shifts to a lower angle and that of （100） crystal plane is unchanged as compared with that of the pure Ti film, which indicates that the lattice parameter c increases and a keeps at the primitive value. The grain refining and helium damage result in the diffraction peak broadening.     

基于PC的电机云母槽自动下刻机测控系统的设计

采用工业用计算机实现自动下刻电机云母槽测控系统的设计方法.在加工工艺允许的情况下,系统采用接触式的检测方法能降低成本,提高可靠性,并提高其自动化的水平.在软件设计上,系统由找槽控制算法和下刻深度算法双闭环控制组成,槽控制算法与下刻深度算法之间相互切换直到加工完电机的所有槽.