基于DEA理论对碳纤维/铝粉/BMI树脂复合材料的有效性分析

加入适当的碳纤维和铝粉对双马来酰亚胺（BMI）树脂进行复合增韧，可以有效改善其力学性能，通常只能通过多次试验结果的优劣比较来评价BMI树脂的力学性能，而不能判断其力学性能是否达最优值。为此，基于数据包络分析理论，给出BMI树脂力学性能的评价模型和计算方法，利用试验数据可以有效测算其最优值，控制碳纤维和铝粉的加入量，使BMI树脂的力学性能达到最优。     

Formation of ζ phase in Cu-Ge peritectic alloys

Rapid growth behavior of ζ phase has been investigated in the undercooling experiments of Cu-14%Ge, Cu-15%Ge, Cu-18.5%Ge and Cu-22%Ge alloys. Alloys of the four compositions obtain the maximum undercoolings of 202 K（0.17TL）, 245 K（0.20TL）, 223 K（0.20TL） and 176 K（0.17TL）, respectively. As the content of Ge increases, the microstructural transition of ＂a（Cu） dendrite ＋ ζ＂ peritectic phase → ζ＂ peritectic phase →, ζ dendrite ＋ （ε＋ζ） eutectic＂ takes place in the alloy at small undercooling, while the microstructural transition of ＂fragmented α （Cu）dendrite ＋ ζ peritectic phase →, ζ peritectic phase →ζ dendrite ＋ ε phase＂ happens in the alloy at large undercooling. EDS analysis of the Ge content in peritectic phase indicates that undercooling enlarges the solid solubility of ζ rdendrite, which leads to a decrease in the Ge content in ζ phase as undercooling increases. In the Cu-18.5%Ge alloy composed of ζ peritectic phase, the Ge content in ζ phase increases when undercooling increases, which is due to the restraint of the Ge enrichment on the grain boundaries by high undercooling effect.     

Solidification microstructure and phase constitution of Fe-7.5%Mo-16.5%Si ternary quasiperitectic alloy

Solidification of Fe-7.5%Mo-16.5%Si ternary quasiperitectic alloy is investigated by using differential scanning calorimetry (DSC) and drop tube containerless processing techniques.The primary phase is identified as R (Fe5Mo3Si2) and the quasiperitectic phases are τ1 (Fe5MoSi4) and Fe3Si.With the decrease of droplet diameter, the cooling rate and undercooling of the droplets in-crease rapidly.The experiment result indicates that the solidification microstructure is composed of remnant primary phase, qua-sip...     

Boundary element numerical method for the electric field generated by oblique multi-needle electrodes

According to the electric potential of oblique multi-needle electrodes (OMNE) in biological tissue, the discrete equations based on the indetermination linear current density were established by the boundary element integral equations (BEIE). The non-uniform distribution of the current flowing from multi-needle electrodes to conductive biological tissues was imaged by solving a set of linear equations. Then, the electric field and potential generated by OMNE in biological tissues at any point may be determined through the boundary element method (BEM). The time of program running and stability of computing method are examined by an example. It demonstrates that the algorithm possesses a quick speed and the steady computed results. It means that this method has an important referenced significance for computing the field and the potential generated by OMNE in bio-tissue, which is a fast, effective and accurate computing method. Supported by the Natural Science Foundation of Beijing (Grant No. 1083011), the National Natural Science Foundation of China (Grant No. 10705049), and the Funding Project for Academic Human Resources Development in Institutions of Higher Learning Under the Jurisdiction of Beijing Municipality     

Strengthening effects of various grain boundaries with nano-spacing as barriers of dislocation motion from molecular dynamics simulations

Strengthening in metals is traditionally achieved through the controlled creation of various grain boundaries (GBs), such as low-angle GBs, high-angle GBs, and twin boundaries (TBs). In the present study, a series of large-scale molecular dynamics simulations with spherical nanoindentation and carefully designed model were conducted to investigate and compare the strengthening effects of various GBs with nano-spacing as barriers of dislocation motion. Simulation results showed that high-angle twist GBs and TBs are similar barriers and low-angle twist GBs are less effective in obstructing dislocation motion. Corresponding atomistic mechanisms were also given. At a certain indentation depth, dislocation transmission and dislocation nucleation from the other side of boundaries were observed for low-angle twist GBs, whereas dislocations were completely blocked by high-angle twist GBs and TBs at the same indentation depth. The current findings should provide insights for comprehensive understanding of the strengthening effects of various GBs at nanoscale.     

Zircon U-Pb geochronology of basement metamorphic rocks in the Songliao Basin

Zircon LA-ICP MS U-Pb dating of six metamorphic rocks and a metagranite (breccia) from southern basement of the Songliao Basin are reported in order to constrain the formation ages of basement. The basement metamorphic rocks in the Songliao Basin mainly consist of metagabbro (L45-1), amphibolite (SN117), metarhyolitical tuff (G190), sericite (Ser) schist (N103), chlorite (Chl) schist (T5-1), biotite (Bi)-actinolite (Act)-quartz (Q) schist (Y205), and metagranite (L44-1). The cathodoluminesence (CL) images of the zircons from metagabbro (L45-1) and metagranite (L44-1) indicate that they have cores of magmatic origin and rims of metamorphic overgrowths. Their U-Pb isotopic ages are 1808±21 Ma and 1873±13 Ma, respectively. The zircons with oscillatory zoning from amphibolite (SN117) and Chl schist (T5-1), being similar to those of mafic igneous rocks, yield ages of 274 ± 3.4 Ma and 264 ± 3.2 Ma, re-spectively. The zircons from metarhyolitical tuff (G190) and Ser schist (N103) display typical magmatic growth zoning and yield ages of 424 ± 4.5 Ma and 287 ± 5.1Ma, respectively. Most of zircons from Bi-Act-Q schist (Y205) are round in shape and different in absorption degree in the CL images, implying their sedimentary detritals. U-Pb dating yield concordant ages of 427 ± 3.1Ma, 455 ± 12 Ma, 696 ± 13 Ma, 1384±62 Ma, 1649±36 Ma, 1778±18 Ma, 2450±9 Ma, 2579±10 Ma, 2793±4 Ma and 2953±14 Ma. The above-mentioned results indicate that the Precambrian crystalline basement (1808―1873 Ma) exists in the southern Songliao Basin and could be related to tectonic thrust, and that the Early Paleozoic (424―490 Ma) and Late Paleozoic magmatisms (264―292 Ma) also occur in the basin basement, which are consistent with the ages of the detrital zircons from Bi-Act-Q schist in the basement.     

Dendritic growth and solute trapping in rapidly solidified Cu-based alloys

Rapid solidification of binary Cu-22%Sn peritectic alloys and Cu-5%Sn-5%Ni-5%Ag quaternary alloys was accomplished by glass fluxing, drop tube and melt spinning methods. The undercooled, by glass fluxing method, Cu-22%Sn peritectic alloy was composed of α(Cu) and δ(Cu41Sn11) phases. If rapidly solidified in a drop tube, the alloy phase constitution changed from α(Cu) and δ(Cu41Sn11) phases into a single supersaturated (Cu) phase with the reducing of droplet diameter, and the maximum solubility of Sn in (Cu)...     

Ubi1 intron-mediated enhancement of the expression of Bt cry1Ah gene in transgenic maize （Zea mays L.）

The cry1Ah gene was one of novel insecticidal genes cloned from Bacillus thuringiensis isolate BT8. Two plant expression vectors containing cry1Ah gene were constructed. The first intron of maize ubiqutinl gene was inserted between the maize Ubiquitin promoter and cry1Ah gene in one of the plant expressing vectors （pUUOAH）. The two vectors were introduced into maize immature embryonic calli by microprojectile bombardment, and the reproductively plants were acquired. PCR and Southern blot analysis showed that foreign genes had been integrated into maize genome and inherited to the next generation stably. The ELISA assay to T1 and T2 generation plants showed that the expression of CrylAh protein in the construct containing the ubil intron （pUUOAH） was 20% higher than that of the intronless construct （pUOAH）. Bioassay results showed that the transgenic maize harboring cry1Ah gene had high resistance to the Asian corn borers and the insecticidal activity of the transgenic maize containing the ubil intron was higher than that of the intronless construct. These results indicated that the maize ubil intron can enhance the expression of the Bt cry1Ah gene in transgenic maize efficiently     

The research progress on lateral shift of reflected electromagnetic wave at the interface of two conductive media

In this paper the research status of lateral shift of reflected electromagnetic wave at the interface of conductive media was reviewed, the lateral shift and the lateral delay were analyzed, and the charac- teristic of lateral shift curves varying with the angle of incidence was introduced in detail. For electro- magnetic wave logging, the error correction method of lateral shift was stressed in this paper, the magnitude of measured errors caused by the lateral shift was established. It is noticed that the longer wavelength, the larger error of measured results. With respect to the effect of lateral shift, the problem which still needs to be settled in the measurement of electromagnetic wave, as well as prospects on the further research and applications of lateral shift are described.     

气体放电中等离子体流体模型的级数解

数值模拟技术已成为低温等离子体研究的一种有效方法,然而由于耦合性极强的电子、正负离子方程组＂刚性问题＂的存在,使模拟计算受到很大限制,这是等离子体模拟所面临的困难.本文针对气体放电中多离子等离子体流体模型,考虑正负离子、电子间的相互碰撞作用及正负离子、电子的产生消耗和迁移扩散问题,对一般初始边界问题,基于分离变量法,导出了一维形式的正、负离子、电子密度随时间空间变化的级数解,获得了气体放电过程中正、负离子、电子密度时空分布一维形式的解析表示.由于研究的出发点是基于一般形式的带电粒子及电势边界条件,并未涉及具体的电极上电压施加方式,因此本方法不仅适用于直流放电过程而且还适应于交流放电过程.