电缆槽对电缆间串扰的影响研究

电缆在使用时一般会铺设在电缆槽中,而电缆槽对铺设其中电缆之间的串扰会形成影响.针对电缆槽中电缆之间的串扰问题,提出一种结合多端口网络理论及分块级联思想的建模方法,使用基于波导格林函数的矩量法来提取电缆槽中电缆间的分布参数,并用虚拟节点理论将提取的分布参数矩阵转化为模型中的传输函数.通过与商业电磁仿真软件的仿真结果进行对比,验证了本文的模型及算法在分析电缆槽中电缆间的串扰问题时具有较好的精确度,最后运用此方法分析了电缆处于电缆槽中不同位置时的线间串扰大小,并结合铁路现场的实际情况对电缆槽中电缆的布线方式提出了建议.     

Auto-deposition of 210Bi and 210Po on nickel discs and their application in the analysis of natural waters

Journal of Radioanalytical and Nuclear Chemistry - This study presents a time-efficient method of analysing 210Pb, 210Bi, and 210Po in natural waters. The optimum pH (1.00), temperature...     

氧化还原介体催化强化污染物厌氧降解研究进展

 由于厌氧生物处理技术具有产生剩余污泥少、可回收能源等优点而被广泛用于处理各种有机污染物，尤其在有毒、有害、难降解污染物的去除方面取得了良好的效果。然而，厌氧生物法的处理速率通常比较低，而氧化还原介体可通过自身不断的氧化和还原来传递电子，提高电子在氧化还原反应过程中的传递速率，从而促进污染物高效厌氧降解。醌类物质和腐殖酸是应用较多的氧化还原介体，在催化难降解污染物降解方面取得了一定效果。讨论了氧化还原介体的特点、作用机制，并总结了其对偶氮染料厌氧脱色、反硝化和多氯联苯厌氧降解的强化作用，提出了氧化还原介体未来的研究方向。     

Strategies for synthesizing non-bioaccumulable alternatives to PFOA and PFOS

This minireview describes the strategies for synthesis of fiuorinated surfactants potentially nonbioaccumulable.Various strategies have been focused on(Ⅰ) reducing the length of the perfluorocarbon chain,(Ⅱ) introducing hetero atoms into the fluorocarbon chain,(Ⅲ) introducing branch(herein and after branch means the fluoro-carbon chain section is not straight).In most cases,the surface tensions versus the surfactant concentrations have been assessed.These above strategies led to various highly fiuorinated(perfluorinated or not perfluorinated) surfactants whose chemical changes enabled to obtain novel alternatives to perfluorooctanoic acid(PFOA) and perfluorooctane sulphonate(PFOS).     

Dynamical analysis of boundary behaviors of current-controlled DC–DC buck converter

Nonlinear Dynamics - In this paper, the current-controlled DC–DC buck converter from a new perspective are studied through the switching theory of flow, and the analytical conditions of the...     

化学法改性煤沥青脱除苯并芘的研究

在管式反应器中采用苯甲酸、聚乙二醇、固体古马隆树脂（S）、液体古马隆树脂（L）为添加剂来降低煤沥青中有害物质苯并芘的含量，以期使得煤沥青可绿色化应用。采用紫外-可见分光光度计分析煤沥青中苯并芘含量。考察了反应温度、反应时间、添加剂添加量、催化剂等工艺条件对添加剂脱除煤沥青中苯并芘的影响。结果表明，不同工艺条件能降低煤沥青中苯并芘的含量。在优化条件下，不同添加剂对苯并芘脱除率由高到低依次为：液体古马隆树脂、聚乙二醇、苯甲酸和固体古马隆树脂。分析其反应机理，这与催化剂的酸性相关，发生亲电取代反应。结果表明，液体古马隆树脂（L）在催化剂存在下对煤沥青中苯并芘脱除率可达73.0%，显示了良好的应用前景。     

外部治理环境与公司绩效:代理成本的中介效应

中国经济发展过程中存在区域发展不平衡现象,这种不平衡现象对公司绩效产生了重要影响。基于2003-2015年沪、深两市A股上市公司数据,以管理费用率度量上市公司管理层与股东间的第一类代理成本,以其他应收款占比度量上市公司控股股东与中小股东之间的第二类代理成本,采用多元回归和中介效应检验程序,实证检验了外部治理环境通过两类代理成本的中介作用对上市公司绩效影响的内在机理。研究结果表明,外部治理环境的提升能够显著的降低两类代理成本,进而提高上市公司的绩效,两类代理成本在外部治理环境影响公司绩效的过程中发挥显著的部分中介作用。     

Measured and Predicted Solubility Phase Diagrams of Quaternary Systems LiBr-NaBr-MgBr2-H2O and LiBr-KBr-MgBr2-H2O at 298.15 K

The stable phase equilibria of quaternary systems LiBr-NaBr-MgBr₂-H₂O and LiBr-KBr-MgBr₂-H₂O at 298.15 K were studied by both experimental measurement(isothermal solution saturation method) and theoretical prediction(Pitzer model). The solubilities of the saturated solution have been determined experimentally and two stable phase diagrams and relevant water diagrams of the two quaternary systems were obtained. Results show that quaternary system LiBr-NaBr-MgBr₂-H₂O is hydrate II type as NaBr and NaBr·2H₂O coexistence. Its phase diagram consists of only one invariant point, four univariant curves, and five crystallization fields. The quaternary system LiBr-KBr-MgBr₂-H₂O is a complex type as the double salt KBr·MgBr₂·6H₂O formed. In addition to this double salt, the three single salts LiBr·2H₂O, KBr and MgBr₂·6H₂O also crystallize. In this paper, the solubilities of phase equilibria in above quaternary systems were also calculated by the Pitzer's electrolyte solution model. All the needed parameters can be obtained from the literature or be fitted by experimental data. On the Basis of the experimental and calculated results, the phase diagram of the quaternary system was plotted for comparison. It shows that the calculation results are consistent with the experimental ones.     

Highly Luminescent Red Phosphorescent OLED with Interfacial Layers for Hole Transport and Electron Injection

Four kinds of red phosphorescent organic light-emitting devices were fabricated and compared to investigate the effect of interfacial layers for hole transport and electron injection. 1 nm-thick LiF in the device A and C and 1 nm-thick Cs₂CO₃ in the device B and D were deposited as an electron injection layer between the anode and the electron transport layer, and 5 nm-thick layer of dipyrazion[2,3-f:2′,2′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile[HATCN] was inserted as a hole transport interfacial layer between the hole injection layer and the hole transport layer only in the device C and D. Under a luminance of 1000 cd/m², the power efficiencies were 7.6 lm/W and 8.5 lm/W in the device A and B, and 8.6 lm/W and 13.4 lm/W in the device C and D. The quantum efficiency of the device D was 15.8% under 1000 cd/m² which was somewhat lower than those of the device A and C, but a little higher than that of the device B. The luminance of the device D was much higher than those of the other devices at a given votage. The luminance of the device D at 7 V was 23,710 cd/m², which was 13.0, 3.4, and 4.0 times higher than those of the device A, B, and C at the same voltage, respectively.