One-pot,one-step,and selective terpolymerization of ethylene oxide,propylene oxide,and COS to copoly(thioether)s with tunable thermal properties

Facile construction of sulfur-rich polymers using readily available raw chemicals is an area aggressively pursued but challenging. Herein we use common feedstocks of ethylene oxide (EO), propylene oxide (PO), and carbonyl sulfide (COS) to synthesize copoly(thioether)s which are traditionally produced from unpleasant and difficult to store episulfides. In this protocol, the EO/COS coupling selectively generates a pure poly(ethylene sulfide) (PES) with melting temperature (T_m) values up to 172°C and high yields up to 98%. The EO/PO/COS terpolymerization leads to the incorporation of soft poly(propylene sulfide) (PPS) and hard PES segments together, affording a random PES-co-PPS copoly(thioether) with the complete consumption of EO and PO. Additionally, by simply varying the EO/PO feeding ratio, the obtained copoly(thioether)s possess tunable thermal properties, T_m values in the range of 76–144°C, and excellent solubility. These copolymerizations are conducted in one-pot/one-step at industrially favored reaction temperatures of 100–120°C using catalysts of common organic bases, suggesting a facile and practical manner. Especially, the copoly(thioether) exhibits high refractive indices up to 1.68 owing to its high sulfur content, suggesting a broad application prospect in optical materials.     

改进遗传算法及其在钻井液设计中的运用

在深井、超深井以及地层复杂等条件下，为了避免或减少钻井事故的发生，达到优质快速钻井的目的，选择合适的钻井液体系至关重要。基于案例推理（CBR，Case-Based Reasoning）的钻井液设计中，钻井液体系由岩性、井型和井深等属性推理得出，但属性权重的分配会对推理结果产生显著的影响；遗传算法在优化属性权重时，存在收敛速度慢、收敛精度低的缺点。针对上述问题，提出一种解决CBR中属性权重分配问题的改进遗传算法。首先，对遗传算子进行改进：选择算子方面，利用指数尺度变换法优化个体选择；交叉算子方面，对算术交叉中的比例因子进行自适应调整；变异算子方面，改进个体变异方向，保持种群多样性。其次，从个体适应度和交叉个体的差异程度两方面实现交叉概率自适应调整。最后，通过对UCI数据集的对比实验，证明了改进后的遗传算法能改善全局收敛性能，提高CBR的准确率。将该算法运用到基于CBR的钻井液设计中，实验结果表明，所提方法能够优化属性权重的分配，进而提高钻井液设计的质量。     

开放性辅导答疑机制的研究与实现

在简要分析了已有远程辅导答疑模式的基础上，提出了一种新型的开放性辅导答疑机制，对此答疑机制进行了分析，并进一步讨论了基于此机制的远程辅导答疑系统的设计与实现．     

二氧化硅胶态晶体的合成

以正硅酸乙酯为原料，采用控制凝聚法制备出173nm和297nm两种不同粒径的单分散二氧化硅微球乳液，并在一定湿度和温度下，利用乳液的单分散性，在表面张力的驱使下完成微球的自组装，从而得到三维有序的二氧化硅胶态晶体。扫描电镜显示：晶体呈面心立方结构，晶体表面至现出鲜艳的颜色，其波长与微球的直径相对应。     

碳钢膏剂无孔渗硅工艺的研究

本研究用膏剂法进行无孔渗硅研究,透射电镜、电子探针和M351腐蚀仪分析证实:获得了致密、无孔隙、具有良好耐磨性和耐腐蚀性的渗硅层,并分析了渗硅层形成机理及表层疏松层以及内部孔隙成因。     

Zeeman效应实验一定能推断出原子的g_J值吗?

本文以实例对Zeeman效应一定能推断原子的gJ值问题做了否定的回答。     

高频强泵浦场激发的等离子体参量不稳定性的特性

本文论证了当泵浦波的强度足够强时,在相当普遍的条件下,对均匀等离子体,唯一可以发生的参量不稳定性是类似于弱场的振荡二束不稳定性(OTSI)。对均匀及弱不均匀等离子体,高频强泵浦场激发的参量不稳定性都是绝对不稳定性。同样的性质在磁化等离子体中也可以得到。 关键词：     

SEPARATING SCN~- FROM DESULPHURIZATION WASTE SOLUTION OF COCKING PLANT BY D241 RESIN

1. INTRODUCTION In the process of coking plant, about 30%~35% sulfur is transformed to H2S and some other sulfide, which form impurity in coal gas together with NH3 and HCN. Only 0.1% H2S containing in air can lead to die, so it is very important to carry on desulphurization and decyanation with coal gas [1~3]. Currently desulphurization and decyanation craft technique have Dry Oxidation Technology, Wet Oxidation Technology and Liquid Absorption Technology [2] three main kinds. The…     

NA列加权乘积和的完全收敛性

本文讨论了NA和几类加权部分和及加权乘积和的完全收敛性，其中部分结果要优于iid列的已知结论。     

基元阀在汽轮机进汽阀研究中的应用

阀碟型线对汽轮机进汽阀的性能影响很大，本文设计了三种形式的基元阀，通过数值模拟手段研究了阀碟型线对流场的影响；得出了不同阀碟形式的性能．